Colored oil, I studied oil painting before and found that oil painting has many advantages.
1. can invade wood, prevent wood from cracking, and reduce the burr problem caused by knife saw.
2. A variety of transparent and bright oil, plus some natural colors, is conducive to the performance of the material effect of wood products.
I feel better than varnish because it has the effect of varnish.
Then talk about how to use and experience:
I draw with oil paintings, and then wash or soak with soap.
Don't use soft brushes such as watercolor pens.
Combine whether you need the effect of painting.
It doesn't need much experimental effect, and it has little influence.
Because after oiling, although the oil is dry, there is nothing special.
However, I am always worried about the influence of pasting. Although I have done a lot of experiments, because I have not experienced long-term effect monitoring, I usually process first, then paste, then oil, and then finish.
But note that it can only be completed after oiling. ...
No.600 sandpaper will leave scratches on the wood. At this time, there are two ways:
1. Use 800 ~ 1500 water sandpaper (I always dry-grind), and finally polish it with coarse cotton cloth (old jeans cloth).
2. After using 600 # sand, oil it again. This time, pay special attention. Don't use too much. Try to use less oil and brush more.