Summary of Graduation Design for Junior College (1) After four months of hard work, my graduation design was finally completed, but in retrospect, the whole process of graduation design was quite rewarding, with bitterness and sweetness, but I enjoyed it! Through this graduation project, I feel that the graduation project is just a simple summary of what I have learned in recent years before accepting the task, but through this graduation project, I find that the graduation project is not only a test of what I have learned before, but also an improvement of my ability.
As a student, graduation project is my last assignment. It is not only a comprehensive summary and comprehensive application of the knowledge learned in the school, but also a good start for practical application in the future. Graduation design is a test and summary of learned knowledge, which can cultivate and improve designers' ability to analyze and solve problems independently. It's the last comprehensive homework I handed in at school.
Through this graduation project, I realized that my original knowledge was too theoretical, and I felt at a loss in the face of individual topics. I still have so much to learn. I used to think I knew everything, everything, and I was a little arrogant. Through this graduation project, I realize that learning is a long-term accumulation process, and I should keep learning in my future work and life, and strive to improve my knowledge level and comprehensive quality.
In short, no matter what you learn, you can't learn anything. It's really difficult. It's really hard to start everything, and I don't know how to start. Finally finished, I feel relieved. Another conclusion is drawn: knowledge can only realize its value through application! Some things are thought to be learned, but the real use is two different things, so I think the real use is really learned.
Thanks to my tutor, Mr. X, for his careful guidance and teachers' help. In the design process, through consulting a large number of relevant materials, exchanging experiences with classmates, self-study and consulting teachers, I learned a lot of knowledge and experienced a lot of hardships, but I also gained a lot. I learned a lot in the whole design, and also cultivated my ability to work independently, and established my confidence in my work ability, which I believe will have a very important impact on my future study, work and life. But also greatly improved the hands-on ability, so that I fully realized the difficulty of exploration and the joy of success in the creative process. Although this design is not very good, what I learned in the design process is the biggest harvest and wealth of this graduation design, which will benefit me for life.
Summary of junior college graduation design (2) My graduation design topic is "Preparation of bidding documents for XXX 1 # building project". I chose this topic because I think it can link my knowledge of three years in college and play a good review role. As the saying goes, reviewing the past and learning new things will have a good effect on future work.
The beginning is to write the opening report. Under the guidance of the instructor, I filled out my graduation project step by step through the template given by the teacher. In addition, I also collected relevant academic papers, core journals, books and so on. Write papers through the internet and libraries. After writing for two weeks, I finally finished the opening report.
Next, according to the arrangement of graduation design task book, I began to draw drawings. According to the requirements of the Student Affairs Office, I need to draw six drawings. Including four machine paintings and four hand-drawn paintings. When I first started painting, I had to review what I said before about painting, so that I could work better. In addition, according to the relevant specifications provided by the teacher, I found out the points for attention in drawing and how to really draw architectural drawings. On the basis of the preliminary work in place, the drawing will progress faster after it starts. * * * After two weeks, I finished drawing.
According to the arrangement of the task book, after reading the drawings and drawing them, the next work is the calculation of engineering quantity and computer calculation. This is the key project of the whole graduation project, because it is the concentrated expression of our professional knowledge. Before doing this work, we must read the book "Engineering Cost" again, and have a comprehensive understanding of the valuation norms and how to correctly calculate the engineering quantity. In the process of calculation, Mr. X often comes to our classroom for guidance, which can answer our questions in time and lay the foundation for our calculation work. In addition, when calculating steel bars, we need some calculation rules and some atlases, and Mr. X will try his best to provide them to us so that we can carry out the graduation design smoothly. In the process of calculating the package price by computer, Mr. X provided us with a set of valuation standards for decoration projects in xx province, which solved many problems for us.
After the calculation of engineering quantity is completed, the next work is to prepare the construction organization design, commercial bid and technical bid. Some of my main steps are modified according to some templates. Some data needed are some data tables generated by arbitrage.
The final work is foreign language translation and drawing output. I found an academic paper online and then translated it with translation software.
After all the above work is done, I will wait for the teacher's approval, and then modify it myself until I meet the teacher's requirements. This is a continuous reciprocating process.
In the whole process of graduation thesis design, I learned the attitude and mentality that I need to do anything. First of all, I learned to be meticulous in my study, and I can't underestimate any problems and deviations that appear. I should solve it in the right way, have patience and perseverance in the process of doing things, and don't give up when encountering difficulties. I can find a way to solve the problem as long as I persist. Learn to cooperate with others in your work and listen to others' opinions carefully, so that you can get twice the result with half the effort.
The smooth completion of the paper, first of all, I would like to thank my instructor, Mr. xxx, and my classmates and friends around me for their help and valuable suggestions. In addition, I want to thank all the teachers who taught me knowledge during my college days. It was your careful teaching that gave me a good understanding of specialized courses, which is also the basis for the completion of the thesis.
On the morning of October 30th, 20xx/kloc-0, our graduation thesis defense was successfully concluded. When Mr. X sent us a message of life, a feeling of parting came to mind. I began to cherish my alma mater, which I trained in my university for three years. Looking at familiar faces, all the joys and unhappiness in the past vanished. Every path and classroom I walk through is so hard to let go. Even every grass and tree now has tears that are hard to give up. University, a paradise on earth full of longing from the beginning; A playground for flying dreams; The Garden of Eden, full of love and goodwill, will leave me forever. Life is just a passer-by, and it is impossible to stay at your feet forever. Setting sail is the real purpose. After graduation, youth is over, and life has embarked on another more perfect journey.
The completion of my graduation thesis has drawn a satisfactory full stop for my three-year college study career, and also indicates that my life has started a new milestone. The graduation thesis has gone through a long, complicated and arduous process from the initial topic selection to the final successful completion, but it is full and substantial, which makes people proud.
20xx65438+1At the beginning of October, the thesis topic and tutor were selected. I chose Teacher X because she is rigorous in her studies, profound in academic knowledge and kind. Later, Teacher X gave us the problem-solving and assignment of winter vacation tasks. Compared with other groups, we are the first to write papers, which is inseparable from the rigorous academic spirit of Teacher X. At first, my understanding and knowledge of problem solving was different from that of Teacher X. After repeated discussions, the conclusion is: My thesis focuses on the design of personal learning environment, that is, how to build my own personal learning environment around blogs. Teacher X also brought me some websites of experts and scholars who study personal learning environment at home and abroad, instructing me how to use the digital resources and library resources in the campus network. I sorted out, classified and studied these rich materials brought by teacher X in winter vacation, and analyzed the topic of the paper, wrote a specific outline and wrote an opening report.
In March of 20xx, I finished the outline of my thesis and sent an e-mail to Mr. X. Mr. X made some necessary changes to my outline, opening report and literature review, such as the outline was too simple, not specific enough, and the key points were not prominent; The task requirements and feasibility analysis in the opening report are not rigorous and scientific, and the thinking logic in the literature review is somewhat confusing. I further improved and revised the thesis outline, opening report and literature review, and finally completed the writing of the thesis outline, opening report and literature review.
March is a very crucial and difficult month for me. I'm really exhausted and exhausted. Because I have to rush about looking for a job, I am also busy writing a thesis. My job is related to my future after graduation, and my thesis is related to whether I can graduate smoothly. They are both very important to me. At this moment, it is the initial writing stage of the thesis, and it is also a crucial stage. The poor outline of the paper is directly related to the writing of the paper, so I will try my best to overcome the difficulties and pains. In order to get rid of the helplessness and depression caused by job hunting, I tried my best to drill into my thesis to pass away my boring, tired and scarred mind. It really pays off. In mid-March, when I was most helpless, I found a job, which gave me great comfort and allowed me enough time to finish my thesis better. In the following time, I wrote my thesis while working.
In April of 20xx, I submitted the first draft of the paper on May 1 after continuous communication with Teacher X, and I gave the necessary affirmation to the first draft of the paper from the email replied by Teacher X. In addition, I also pointed out some shortcomings. For example, most of the papers are the information of sentence lines, and they are rarely really integrated into personal understanding; The structure of the paper is a little loose, and the links between parts are not enough, which fails to understand the logical relationship between blog culture and personal learning environment; The format is not rigorous; The references are also unmarked. Repeatedly study the valuable recommendation given by Teacher X, reread the topic of the paper, and communicate with Teacher X in time. On May 20th, 20xx, I submitted the second draft of my thesis as quickly as possible. Teacher X gave me a high evaluation and affirmation, which was a great breakthrough compared with the first draft. The disadvantage is that there are too many details. In addition, I put forward some constructive suggestions on the design framework of personal learning environment based on blog culture. For example, Teacher X gave me necessary help and care in my work and life.
On May 25th, 20xx, I handed in three drafts of my thesis. Teacher X is very satisfied with my revision, saying that after paying attention to the revision of the format, it can basically be finalized. When I saw these words in the email, I was very pleased at once. I felt that the whole person was much simpler and a sense of accomplishment came to me. I was very proud and satisfied, especially when I saw the frame diagram of my own learning environment.
Finalized on May 27th. On the morning of 28th, I hurried back to school to prepare my thesis defense, and time was pressing. I have been familiar with and studied my thesis materials repeatedly, made the PPT manuscript necessary for my defense, and guessed the questions that the judges and teachers would ask. Although I was a little nervous when I answered, I was basically satisfied.
This is the whole process of my three-year college graduation thesis, which is very hard, but also very happy and proud.
Here, I want to thank my teachers and classmates, who gave me help and encouragement when I was most difficult and helpless. In particular, my tutor, Mr. X, showed meticulous care and careful guidance to me.
Summary of graduation design for junior college (4) During the period when I finished my graduation design, I gained a lot. I not only mastered my previous professional knowledge more familiarly, but also improved a lot of knowledge that I didn't use often before. Now that my graduation project has been completed, I want to write a summary to record our experiences and gains after the completion of this graduation project:
In this graduation project, because it is a group of three people, the relationship between our classmates has been further improved. Students help each other. If there is anything we don't understand, we can discuss it together, listen to different opinions and better understand our knowledge. Therefore, I am very grateful to my classmates who have helped me here. Thank you for your careful guidance and help. In the design process, through consulting a large number of relevant materials, exchanging experiences with classmates, self-study and consulting teachers, I learned a lot of knowledge and experienced a lot of hardships, but I also gained a lot. I learned a lot in the whole design, and also cultivated my ability to work independently, and established my confidence in my work ability, which I believe will have a very important impact on my future study, work and life. But also greatly improved the hands-on ability, so that I fully realized the difficulty of exploration and the joy of success in the creative process. Although this design is not very good, what I learned in the design process is the biggest harvest and wealth of this graduation design, which will benefit me for life. Three years of college will draw a satisfactory conclusion in this final graduation design summary. I used to think time was slow, but now I think time flies so fast. Three years later, I feel that my college life is over in a blink of an eye. Graduation is the most important process, and the process that can best apply theoretical knowledge to practice is graduation design. This is also a turning point for us to move from a student to society. The beginning of another life course. One month after graduation design, I learned a lot and matured a lot. I will now summarize my process and what I have learned as follows:
Fill in the original vouchers and accounting vouchers according to the economic business. The original voucher refers to the voucher that directly records the economic business, clarifies that the economic responsibility has legal effect and serves as the original basis for bookkeeping. Their main function is to prove the occurrence and completion of economic business. The content of the original voucher is the name of the original voucher, the date and number of the voucher, and the basic content of the economic business. The basic contents of economic business should be described qualitatively and quantitatively, such as the name, quantity, unit price and amount of the purchased goods, and signed by the reporting unit and relevant personnel. Accounting vouchers are the direct basis for registering account books. The accuracy and completeness of the electronic account book after the implementation of computer accounting completely depend on the correct original vouchers in the operation of accounting vouchers. Fill in the contents of accounting vouchers, such as voucher type, voucher number, voucher preparation date, account content, etc. Register the subsidiary ledger according to the accounting voucher and the attached original voucher. Sub-ledger, also known as sub-ledger, is an account book that registers sub-ledger according to the account page of sub-ledger account. After entering the accounting voucher, the computer will automatically register the subsidiary ledger. Calculate product cost according to accounting vouchers and subsidiary ledger. According to accounting vouchers and subsidiary ledger, the product cost is calculated by comprehensive carry-over method in step-by-step settlement method. Make account summary according to accounting vouchers. Try to balance the account. Reconciliation is to check the data of account books, check whether the accounting is correct and whether the account books are balanced.
First of all, the subsidiary ledger itself is an account book that opens an account page according to the secondary account or subsidiary account, classifies and continuously logs in the economic business, and provides detailed accounting data. It takes a lot of time to log in the subsidiary ledger because there are too many entries and too many details. Moreover, because the professional knowledge of the original documents is unreliable and cannot be fully integrated into practice, there are many loopholes in the process of doing it. Either it was a mistake, or I forgot to log in and made some low-level mistakes that I shouldn't have made. Because of my carelessness and caution, I always have a lot of loopholes when logging in, and I always can't do it well. After the audit, I corrected all the mistakes as much as possible and completed the registration of the subsidiary ledger.
There are also repeated changes in accounting vouchers, especially the profits of the following year. However, through this graduation project, I have a complete grasp of all accounting processes. I have to say that this is a great progress, and the typing speed and office software are becoming more and more skilled, which is also an extra gain.
The above is my experience in this graduation project. Finally, thank you again for helping my teachers and classmates. Because of your help and encouragement, I became who I am now. I will work hard, be strict with myself, work hard and serve my work with what I have learned!