Current location - Education and Training Encyclopedia - Graduation thesis - Is there a master who can teach me how to typeset my paper?
Is there a master who can teach me how to typeset my paper?
The requirements of each school may be a little different, and they are roughly the same. . . You can refer to the following. . O(∩_∩)O~ I hope I can help you. . .

1. The writing procedure of graduation thesis for liberal arts majors can be roughly divided into six stages: (1) determining the tutor; (2) discuss with the tutor and choose the topic; (3) reading literature and collecting data; (4) Draw up a writing outline; (5) Write and submit the first draft, and discuss the revision with the tutor; (6) Finalization and tutor review.

The graduation thesis of liberal arts majors requires clear topics, informative materials, rigorous argumentation, fluent and concise language, reasonable structure, integration of theory with practice, correct views or some unique opinions; All charts are used in this paper, and citations and notes are endnotes. The length of graduation thesis should be no less than 6000 words (excluding charts).

2. The writing process of graduation thesis for science and engineering majors can be roughly divided into six stages: (1) determining the tutor; (2) discuss with the tutor and choose the topic; (3) reading literature and collecting data; (4) Draw up the design or experimental scheme; (5) Design or experiment; (6) Theoretical analysis and technical analysis, writing the first draft and revised draft; (7) Finalization and tutor review.

The graduation thesis of science and engineering specialty requires reasonable design scheme, accurate demonstration, sufficient theoretical analysis and technical analysis, correct experimental and calculation methods, accurate and reliable data, clear chart specification, accurate text expression and fluent and concise language; In principle, use the chart in the text, but you can't use the chart in the text. Drawing and tabulation specifications can be determined according to actual needs. They are attached to the text of graduation thesis in the form of attachments, and the quotations and notes are endnotes. The length of graduation thesis is not less than 5000 words (excluding charts, programs and calculated figures).

3. The format of students' graduation thesis adopts the unified format stipulated by the academic affairs office of the school: (1) topic; (2) Students (name, college, department, major, grade); (3) Instructor (name, title); (4) Chinese abstracts and keywords; (5) catalogue; (6) Introduction; (7) text; (8) conclusion; (9) thank you; (10) English title, abstract and keywords; (1 1) references; (12) appendix.

4. Content requirements for graduation thesis:

(1) Title: Be concise, clear and general, with no more than 20 words.

(2) Abstract: There should be a high degree of generalization and the language should be refined and clear. There are two versions in Chinese and English, and the number of words is less than 400 words.

(3) Keywords: Choose 3~5 words or terms that can best express the main content from the title or text of this article as keywords, and compare them in Chinese and English.

(4) Contents: As the outline of the paper, the contents are the subheadings of each part of the paper, and the text should be concise. The table of contents is written in chapters and sections according to the order of papers, and the number of pages is marked for easy reading. The title in the table of contents should be consistent with the title in the text.

(5) Introduction: It is the beginning of the graduation thesis, which mainly explains the purpose, practical significance, understanding of research issues and puts forward the central argument of the thesis. The introduction should be concise, not too long.

(6) Text: It is the main body of the graduation thesis and a detailed statement of the research work, generally consisting of titles, words, figures, tables and formulas. This part should use all aspects of experimental results and research methods to analyze problems, demonstrate opinions, and try to reflect students' scientific research ability and academic level.

(7) Conclusion: The conclusion is the ideological essence of the full text and the embodiment of the value of the article. It is necessary to sum up the situation and value of the work, analyze its advantages and characteristics, point out the innovations, point out the existing problems and the future improvement direction, especially the important problems encountered in the work, and put forward their own opinions. It embodies the author's research results and expresses the author's views and opinions on the research topic. The conclusion should be simple and clear, not too long.

(8) Thank you: At the end of the article, it is usually a short sentence to express your gratitude to the person who gave you direct help in the work process.

(9) References: References refer to the references cited by the author in the graduation project (thesis), including research background, research methods, comparison of research results, etc. They are an indispensable part of the graduation project (thesis) and the author's recognition and respect for other people's knowledge achievements. The cited documents of graduation project (thesis) must be reflected in the cited places and numbered in sequence. The cited documents should be listed in the order in which they appear and attached to the end of the article.

(10) Appendix: Appendices are materials that should not be placed in the text, such as survey marks, formula derivation, programming, original data schedules, etc. Put it in the design (paper) data package.

5. Students' graduation thesis and its foreign language translation are printed on A4 paper, with the top margin of 2.5cm, the bottom margin of 2.0cm, the left margin of 2.0cm and the right margin of 2.0cm. Each page should be marked with "header" and "page number". Print typesetting format is as follows:

(1) The cover of the paper adopts the uniform format stipulated by the academic affairs office of the school.

(2) Title, abstract and keywords

The title of the paper (design) is in bold type No.3, which can be divided into 1 or 2 lines for center printing. Under the topic of paper (design), print an abstract with blank lines, and print the words [abstract] (bold type 4) and the contents in the blank space after the words [abstract] (small font size 4). In the content, the word [keyword] is printed in a blank line (bold No.4), followed by the keyword (small No.4), and there are two spaces between every two keywords. All English abstract topics are in Arial No.4 font, and abstract contents and keywords are in Arial No.5 font. Title, Chinese abstract, keyword page. English abstracts and keywords are on another page.

(3) The word "Table of Contents" (bold No.4), the next two lines, chapters, sections and their initial page numbers are in small No.4 font. The page number is placed at the end of the line, and the contents of the directory are connected with the page number with a dotted line.

(4) The introduction is printed in small four-character font (if there is a title, it is printed in bold four-character font).

(5) Title: The title of each chapter is printed in small three bold letters in the center; Under the "chapter", the second line is "section", which is printed from the left of the fourth song style; Below the "festival", there is a line of "festival", which is printed in bold type No.4 on the left. Print paper (design) text with line breaks.

(6) Text: printed in Xiaosi Song.

(7) The chart in the text should be self-evident. The names of drawings and tables shall be accompanied by corresponding English and necessary Chinese explanations. Drawing requirements: width of semi-column chart ≤7cm, width of full-column chart ≤16 cm; The thickness of the curve in the drawing should be equivalent to the vertical drawing of Song Dynasty No.5, and the thickness of the coordinate line should be equivalent to the horizontal drawing of Song Dynasty No.5; The characters, symbols and vertical and horizontal coordinates in the picture are marked with small five characters; Titles are expressed by the ratio of physical quantities (italics) to unit symbols (orthography) of national standards, such as c/molL- 1. The form adopts "three horizontal lines form", and the contents of the form shall not be repeated with the pictures and words.

(8) Formula: The formula should be written in a new line of the text, centered. The number of the formula is placed in brackets at the end of the right line of the formula, and there is no dotted line between the formula and the number. The formula should be numbered and arranged in chapter order.

(9) The word "conclusion" is in Song Dynasty No.4, and the content of the conclusion is Song Dynasty No.4..

(10) The words of thanks are in bold type No.4, and the contents are in song style No.4. ..

(1 1) The description of references shall conform to GB77 14-87 "Rules for the Description of References at the End of Documents" and "Data Specification for Retrieval and Evaluation of China Academic Journals (CD-ROM Edition)", and the sequential coding system shall be adopted. The citations shall be continuously coded with Arabic numerals in the order in which the cited documents appear in the paper, and the serial numbers shall be placed in square brackets. If a document is repeatedly cited in the same article, it should be marked with the same serial number. If you need to indicate the specific source of the quotation, you can put brackets after the serial number to indicate the page number or the title of the chapter, section and article, and the font is Xiao Wu Song Ti.

The description items of references after the text should be complete, and their arrangement order should be based on the order in which they appear in the text; The list of references should be marked with "References:" or "[References]" (centered); The left top box of serial number is marked with Arabic numerals and square brackets; Each entry ends with a solid dot.

The entries recorded in the references are arranged at the end of the text in a font size smaller than that of the text. File description format:

Monograph: author. Title [M]. Place of publication: publishing house, year of publication.

② Journals: authors. Title [J] Title, year of publication, volume (issue): page number.

(3) Prose collection: author. Prose collection name [C]. Place of publication: publishing house, year of publication. Start and end page numbers.

(4) Paper: Author. Title [D] Storage location: storage unit, year.

⑤ Patent literature: patent owner. Title [P]. Patent country: patent number, publication date.

⑥ Electronic document: person in charge. Title of electronic document [identification and carrier type of electronic document]. Electronic document website. Year-month-day. Lists all authors of the document; If there are more than three people, list the top three, plus "waiting for people".

According to GB3469-83 "Document Types and Document Carrier Codes", the types of references are identified by single letters: M- monograph, C- anthology, N- newspaper article, J- journal article, D- dissertation, R- research report, S- standard, P- patent; The literature precipitated in monographs and papers is marked with the single letter "A", and other unspecified literature types are marked with the single letter "Z".

6. Other requirements:

(1) The titles and paragraph formats (including top box or indentation) of all chapters in the full text should be consistent;

(2) The style of each chapter of the full text should be consistent, for example, whether each chapter (section, title) has an "introduction";

(3) Time statement: replace "June 2004" or "June 2004" with "June 2004";

(4) Title number: In order to conform to general academic norms, nonstandard usages such as "semi-bracket", "1" and "1" are generally not allowed, and punctuation marks are not allowed at the end of the title;

(5) The typos or irregularities in the full text shall not exceed 2/10000.