Question 1: Which brands of domestic loaders have good quality? Domestic loader brands are not absolutely good or bad. The homogenization between famous brands of big manufacturers is very serious, basically the same, and minor problems are avoided. The key depends on how much your local market has, whether the accessories are easy to buy and whether the after-sales service is timely. At present, the top five loaders in China are Liugong, Gong Lin, Xiagong, Xugong and Longgong.

Question 2: What brand of forklift is the best in China? In fact, no matter what kind of forklift, it is impossible to be absolutely perfect. See the original post >>

Question 3: Which brand of forklift has better quality? Thank you, Hu Yue.

Question 4: What brand of loader is the best to buy? Don't listen to others. The brands of Liugong, Xiagong, Gong Lin, Gong Shan and Longgong basically occupy more than half of the China market, but in fact, the homogeneity of loaders is already obvious, and there is nothing perfect, so buying loaders depends on what the top brands of your local major sales brands are, and then choose from these brands which are good in service, easy to buy accessories, high in cost performance and suitable for your working conditions. Never buy what others say. Most of what others say is hearsay. What you really used depends on your first impression. Say yes when you use it well the first time, and say no when you use it badly the first time.

Question 5: What brand of loader is better? Small loaders generally refer to multi-cylinder or single-cylinder machinery under 20, and the brands vary from region to region. Although the old brand is as good as that of a temporary worker like Lovo, it has many disadvantages besides quality advantages, such as high price and unreasonable structure (such as changing gear rings). ) and mental retardation. Personally, there are several requirements that must be met when buying a small loader. 2, stepless speed change, 3, unassembled, 4, single hydraulic lever (four actions of loader shovel arm operation are completed by one lever, that is, front, back, left and right directions), 5, middle transmission shaft (that is to say, the transmission shaft can't be seen from the ground, but can only be seen from the side), 6, double-top control of front driving direction, 7, new car.

Shunsong Shang Qi

Question 6: What brand of loader is of good quality? There is no absolute quality, and there is no bad machine. The key depends on your local after-sales service and spare parts supply. But at present, the ranking of loaders is Liugong, Gong Lin, Xiagong, Xugong and Gong Shan, not to mention other minority brands.

Question 7: I want to buy a small forklift. I don't know what brand is good and the price is moderate. Pay attention to the combination action! That is to say, several actions can be done at the same time, and one action cannot be done at once.

1. Shovel in: Walk (forward), at the same time, increase your arm and level the bucket, that is, when you walk to the front of the pile, your bucket should be just in place, and you can shovel in with momentum;

2. Bucket tilting, stick lifting and reversing are carried out at the same time. When reversing, slowly lift the boom and straighten the bucket. After shifting into the forward gear, continue to lift the boom while walking;

3. Unloading: When you are not far from the trunk, you will start to unload the bucket, so don't worry about dumping, because if you move fast enough, the material will start to slide down because of inertia and won't come down immediately. After the bucket reaches the edge of the trunk, while continuing to unload the bucket, some boom should be lowered at the same time. When it reaches the correct position, the bucket will just turn over and stop lowering the boom, at the same time, the material will stop lowering the boom.

Just look at the master.

Question 8: Which brand of forklift is better? 20 points. Which brand of forklift is good depends on your use. Now Gong Shan, a Liugong, a Longgong and a Xiagong ... is doing very well.

The use of forklift mainly depends on the working environment and maintenance. A serious and responsible forklift driver will prolong the service life of your truck and reduce losses. You can only drive a driver who can't maintain. You bought him a tank. It's broken.

Liu Gongjin leather Chai Wei and Yuchai engine parts are easy to buy, and the price is slightly higher.

Longgong has a wide field of vision, a slightly slower boom and a slightly slower driving speed when the cab is configured.

Xiagong's vehicle configuration is moderate. Personally, I feel that the gearbox design is poor and the gear shift is obvious after the car is old.

Xugong is famous for its cranes and road rollers, and its loader configuration is moderate. The only advantage is its obvious price.

The price of picking up a car temporarily is low, and going to work in winter is boring and the motivation is not strong.

Lovo gearbox and transmission shaft are poor. The oil tank is designed beside the counterweight iron.

Regardless of other forklifts, I think it's good to choose mountain workers and willow workers 50c. If the work is not too busy, I choose Liugong 855 and Longgong.

Question 9: I want to buy a 20-inch forklift. Which brand has good quality and strong practical performance? Thank you! That depends on your area. Generally, sellers sell above 30 yuan, and small ones go to construction machinery to buy. Most of the small ones are made by small factories, and the price is about1530 thousand. There are also mountain workers, temporary workers, xugong workers and Xiamen workers, but they are rare, and they are expensive and uneconomical.

Question 10: which brand is better than the top ten domestic brands, the small loader or forklift? That's a tubular generator for generating electricity. When the engine of a normal car is working, the red light should always be on. Its function is to provide excitation current for the magnetic field winding of the generator and adjust the excitation current to ensure that the power generation is around 28.0 regardless of the engine speed, and the error is 0.5v Now it depends on your situation. First of all, has the fuse blown? Second, use a wrench to test whether the generator pulley has suction (the key switch is in the second gear). If it is unsafe, it means that the regulator is broken. Or you can use a small test lamp to measure+and f on the regulator. Both test lights should be lit, or replace the regulator. Just buy one yourself, remember the position of the three lines and don't connect them wrong. General 15.00 will do.