First, the graduation design practice work
The Xx-level graduation design instructor conscientiously implemented the internship site, personally led the students to visit the factory for internship, collected information from scientific research institutes, conducted research on graduation design topics, and made the graduation design the first level. Students have increased their practical knowledge from the internship, listened to the lectures of technicians, and actually operated the equipment, which laid a good practical foundation for graduation design. The internship research sites are as follows:
Qingdao huachi packaging machinery co., ltd. Tianjin combination fixture factory
Dacheng Group Company Beijing People Machine Factory
Beijing Institute of Electromechanical Research Beijing Miyun Machine Tool Research Institute
Beijing yanjing beer north tianniao science & technology company
Skyworth electronics co., ltd. Beijing jeep automobile co., ltd
Long Yuan rapid prototyping co., ltd. Beijing honeycomb board factory
Wuxi Xida honeycomb production line manufactory Hebei Qinhuangdao cigarette machine factory
Shanghai Yongda Hitachi Elevator Company Shanghai Paper Machinery Research Institute
Hangzhou Wahaha Group Company Shandong Huang Ming Solar Water Heater Company
Beijing First General Machinery Factory Beijing Small Compressor Factory
Beijing Qingdao Wuxing Beer Co., Ltd. Beijing Sanyuan Dairy Factory
Beijing Zhongrong Baiming Biotechnology Co., Ltd. Zhao Wei Group
Beijing Academy of Agricultural Sciences
In the above-mentioned practice places, graduates visited and inspected electromechanical integration equipment, microcomputer control equipment, spectrometer equipment, embroidery machine electromechanical integration equipment, logistics equipment and technology, automatic production line equipment, numerical control processing and manufacturing equipment, biological processing technology equipment and honeycomb material forming equipment.
Second, the graduation design work arrangement
On the afternoon of Tuesday, October 7th, 65438/KLOC-0, a xxx-level graduation design arrangement meeting was held in the lecture hall, which specially arranged the graduation design work and explained the graduation design requirements of mechanical engineering and its automation specialty in detail.
1. Requirements for graduation thesis of mechanical design:
The number of words in the design manual is 12000 to 20000.
The number of mechanical engineering drawings is generally not less than 3 converted sheets A0.
Translate foreign language materials related to this subject, with no less than 3000 words.
Require a scheme, a choice, a calculation, an optimization, and use computers to carry out graduation design.
2. Mechanical software graduation design thesis requirements:
Combined with the actual situation of machinery, the relevant software design and programming are carried out.
Submit valid program floppy disk and source program list.
Software design specification
Summary of project development
Software test passed
Mechanical engineering drawings shall not be less than 1 sheet, which shall be converted into A0 sheets.
I hope that the students who graduated from college will integrate what they have learned in four years, improve their ability to design and solve practical problems, and lay a good foundation for going to work.
Third, the mid-term exam of graduation design
In order to strengthen the supervision of graduation project, the College of Mechanical Automation set up three inspection teams in the ninth week: Light Machinery Inspection Team: Xin, Ding Xiyuan, Fang Yi,,.
Inspection Team of Food Machinery: Cao Yanping, Liu Yude, Qingwu and Zhang Li.
Electromechanical inspection team: Shen Xiaohong, Zhang Yuanpei, Fang Xiaocui and Lv Dongyan.
On April 2nd, xxx, the College of Mechanical Automation posted the mid-term exam decisions and methods to the special classroom for graduation design, which played a role in urging students. Due to the special external environment of this year's graduation project, each graduation project inspection team conducted a spot check in early May in a flexible and diverse way, and the results are as follows:
Light unit: random sampling 14 student graduation design, with average progress. The scheme demonstration and selection have been completed, and theoretical analysis and structural design are under way; Some students have made progress in assembly drawing design and transmission system calculation.
Food machinery group: all the students' graduation projects were randomly selected. About one third of the students completed the corresponding graduation project tasks according to the normal progress, and one third of the students have not started to calculate and draw. The inspection team urged and guided these students.
Mechanical and electrical group: 20 students were randomly selected for graduation design, and most of them were able to design according to the requirements of graduation design, but the work progress was generally slow.
Four, graduation design students and instructors work arrangements
In view of the problems in the mid-term examination of graduation design, the College of Mechanical Automation held a meeting of graduation design instructors, which emphasized:
1. The graduation design requirements will not be lowered this year;
2. Graduation design should be strengthened;
3. Graduation design teachers should guide students' graduation design by telephone or online;
4. Graduation design teachers and students who leave school in Beijing meet and guide through appropriate means;
5. Standardization of graduation thesis;
6. Graduation design should be submitted in electronic version;
7. Those who fail the graduation design cannot pass;
8. Excellent graduation design should be strictly controlled;
9. The work of the graduation design instructor should be done in front to prevent the graduation thesis from being simple and rough, resulting in students not graduating normally;
10. Graduation design Each major produces 10% excellent graduation design and 10% poor graduation design.
At the same time, the College of Mechanical Automation held a graduation design re-arrangement meeting for all xx-level undergraduates, emphasizing that graduation design should be carried out normally, the requirements should not be lowered, and graduation design work should be stepped up.
Five, graduation project defense work
According to the requirements of the document number. School of Mechanical Automation No.7 [2003] of Industrial and Commercial School has set up five defense teams, which are responsible for the defense of xx-level graduation design.
1. Composition of the defense team:
Light Machine 1 Group: New, Fang Yi,,.
Light Machine Group 2: Ding Xiyuan, Huang Zhigang, Hu Yaping and Meng Chunling.
1 Group: Cao Yanping, Fang Sheng, Liu Yude, Qingwu, Wu Xue.
Electromechanical 1 group:, Xie, Zheng, Wang xiaobei, Nie.
Electromechanical Group 2: Zhang Yuanpei, Fang Xiaocui, Huo Liangsheng, Liu Meilian and Xiong Guangjie.
2. defense summary:
In the defense, the students narrate the paper 15 minutes, the defense teacher looks at the picture for 5 minutes, the defense teacher asks questions, and the students answer 10 minutes. Through the defense, students' ability to answer questions and express themselves in language is improved. All defense team members earnestly implemented the defense requirements and successfully completed the defense task.
3. Graduation design performance evaluation:
For students who take part in the defense, the tutor will give 40%, the reviewer will give 20%, and the respondent will give 40%. Students who do not participate in the defense will be given 70% by the tutor and 30% by the assessor.
Summary of graduation project of intransitive verbs
This year's graduation project was completed under special circumstances. Students' thoughts fluctuate greatly, and there are some difficulties in consulting materials, guiding teachers and communicating with each other. Students' graduation project has been greatly impacted, and their time and energy are obviously insufficient. Instructors conscientiously perform their guiding duties in special periods, and keep in touch with students at any time through face-to-face instruction, off-campus centralized guidance, e-mail, telephone and other means to urge students to finish the design quickly. At the same time, teachers have adjusted some design contents to meet the requirements of graduation design and enable students to finish it on time.
In this graduation project, the Institute of Mechanical Automation made full use of the existing experimental equipment for graduation design, and studied some of them.
Students combine flexible processing system, mechatronics experimental system, numerical control equipment, computer embroidery machine, PLC programming, software programming and mechanical vibration equipment for graduation design. Because the equipment embodies the characteristics of the close combination of advanced technology and practical application, it stimulates the initiative of students' design and achieves good results.
This year's graduation project is a very special graduation project. Teachers and students are facing unprecedented difficulties. Through our joint efforts, the graduation project has been successfully completed.