Current location - Education and Training Encyclopedia - Graduation thesis - Books for machinists and assemblers
Books for machinists and assemblers
Machinists and assemblers-a practical technical manual. Liu Dongsheng Jiangsu Science and Technology Press.

/item/b 67394 c 54070 a 33486 c 1b 544

The first chapter is the basis of drawing recognition and interchangeability.

Section 1 Map Recognition

I. Drawing lines and symbols

Second, the service concept and model

Third, the simplification of the model.

Fourth, pattern reading.

Section 2 Tolerance and Cooperation

A, standard tolerance

Second, the basic deviation.

Third, choose cooperation and joint cooperation.

Section 3 Surface Roughness

A, surface roughness labeling and its numerical value

Second, the surface roughness and tolerance level and cooperation

Thirdly, the detection of surface roughness.

Section 4 Tolerance of Shape and Position

I. Marking and numerical value of form and position tolerance

Second, the detection of form and position tolerance

The second chapter fitter operation basis

The first section chisel, saw and file processing

First, the chisel cuts.

Second, sawing

Third, put on record

Four, chisel, saw, file and machine repair

The second section hole and thread processing

First, drilling

Second, reaming.

Three. Counterbore and hinge l

Four, countersunk head seat and through hole size

Verb (abbreviation for verb) tapping and tapping.

Section III Scraping and Grinding Processing

First of all, scraping

Second, grinding

Three, scraping, grinding and mechanical repair

The fourth quarter fitter connection

I. Welding

Second, bonding.

Third, riveting.

Four, welding, bonding, riveting and mechanical repair

Section 5 Assembly

First, the assembly process

Second, the assembly of common parts

Three. General assembly of equipment

Four, assembly and machine maintenance

Chapter III Repair of Mechanical Parts

Section 1 Economic and theoretical requirements for machine maintenance

First, the role of machine maintenance

Second, the economic and technical conditions that machine maintenance must meet and the development of machine maintenance

Third, the theoretical requirements of machine maintenance

Section 2 Classification of Mechanical Parts Repair

First, the characteristics of parts

Second, the classification of parts repair

……

Chapter IV General Maintenance Technology of Ordinary Machine Tools

Chapter V Common Mechanical Faults and Maintenance of Ordinary Machine Tools

Chapter VI Common Faults and Maintenance of CNC Machine Tools

Chapter VII Common Mechanical Faults and Maintenance of Special Machining Machine Tools

Chapter VIII Common Materials

Appendix 1 Common Faults and Troubleshooting of Pretreatment Equipment

Appendix 2 hydraulic and pneumatic graphic symbols

Main references

Mechanical Fitter (Intermediate) Wu Quansheng Machinery Industry Press

Mechanical Fitter (Senior) Wu Quansheng Machinery Industry Press

/item/e 2800 c7e 8 1908 E3 fbed 16d 1d

Chapter 1 Preparation before Equipment Maintenance

Chapter II Basic Knowledge of Equipment Maintenance Specialty

Chapter III Design and Manufacture of Special Tools for Equipment Maintenance

Chapter IV Repair of Precision, Large-scale, High-temperature, High-pressure, Corrosion-resistant and High-speed Running Mechanical Parts

Chapter V Precision Repair and Adjustment Technology.

Chapter VI Troubleshooting of Machine Tool Hydraulic System

Chapter VII Installation of Large Equipment

Chapter VIII Common Faults of Precision, Large-scale and Complicated Equipment and Troubleshooting Methods

Chapter IX Accuracy Inspection of Machine Tool Repair and Assembly

Chapter 10 Machining Accuracy Inspection and Out-of-tolerance Treatment of Precision, Large-scale and Complicated Equipment

Chapter II XI Special Inspection

Chapter XII Training Guidance

I recommend: Machinist (Senior) Wu Quansheng Machinery Industry Press.