How to make a word three-wire table, how to make a word three-wire table? ( 1)
Experimental measurement and calculation data are the core contents of scientific papers. As one of the main forms of data expression, tables are widely used because of their clear function of quantitatively expressing quantitative information. The three-line table is concise in form, clear in function and easy to read, so it is recommended to be used in scientific papers. So, how to make a three-line table in WORD?
(1) Make an ordinary table first. Open the menu "Table-Insert Table", select the number of columns "3" and the number of rows "4", and a bordered table with three columns and four rows will appear in the document. Enter the content, pay attention to select "Align Left".
(2) Move the mouse to the upper left corner of the table. When the four-way arrow appears, select the table (point black), open the menu "Format-Borders and Shading", and select "None" in the settings to cancel all borders of the table.
(3) Select the table again, open the menu "Format-Borders and Shading", select a thicker line from the line width drop-down list, such as 1 and 1/2 points, and add "top" and "bottom" border lines to the table in various solid border lines on the right. Of course.
(4) The horizontal line of the title bar needs to be added below. Open View-Toolbars-Drawing and add a drawing toolbar. Click the line tool in the drawing, hold down the shift key, and draw a thin line with the same length as the table line.
(5) At this time, the hand-drawn line may not be in the correct position, but on the upper or lower side. Hold down the Alt key and use the mouse to move the straight line to the right.
Click "Print Preview" on the toolbar, and you can see that a simple three-line table has been drawn. You can also modify the content text to match the position of the title text.
Recommend three methods to make word three-line table;
Method 1: the most practical.
1. Make an ordinary table first: open the menu Table-Insert Table, select the number of columns "3" and the number of rows "4", and a bordered table with 3 columns and 4 rows will appear in the document. (Enter the content, pay attention to select "left alignment")
2. Remove borders: move the mouse to the upper left corner of the table, select the table (dot black) when the four-way arrow appears, open the menu Format-Borders and Shading, and select None in the settings on the left side of the window to cancel all borders of the table.
3. Add upper and lower lines: select the table again, open the menu format-border and shading, select the type from the line width drop-down list, select thicker lines, generally choose 1 and 1/2 points, and add "upper" and "lower" border lines to the table in various solid border lines on the right. Click OK to add top and bottom lines.
4. Add the middle line, that is, the column line: after selecting the first line of the table, right-click "Borders and Shading", select a thinner line from the drop-down list of linear width, generally 1 point, and add a "bottom" border line to the table among the various solid border lines on the right. Click OK. (Note: choosing the middle line does not mean adding only one line in the middle, but adding the original line in the middle)!
Word three-wire table is made in this way. Let's all try it! It's simple! Method 2: Select a table in Word-Insert a table (without drawing a table)-Select the number of rows and columns, and select the AutoFormat-Concise 1. After inserting the table, select all, right-click to select the cell format, and the font can be vertically centered or aligned left and right. Method 3: The methods widely used at present are too complicated, and every table needs this. The following methods can be set once and applied directly.
In the paper, it is generally required to use a three-line table, that is, the table can only have an upper border and a lower border, plus a thinner border below the title line, which is three lines. The production method is as follows (I used Word 2003):
1. Click the "Tian" mark at the top left of the table (it will appear when the mouse hovers over the table) and select the whole table.
2. Right-click and select AutoFormat from the menu to open a window.
3. Click the "New" button on the right to create a new style, and then a window will pop up for you to set the style properties.
4. The pop-up window is as follows:
You can fill in the "name" column at will, and here we fill in the "three-line form".
The Style Based on item allows you to add some new attributes to an existing style. Here, we can choose an ordinary table.
5. Pay attention to the column "Format applied to". Let's select "whole table" first, and then set the top and bottom borders of the table (click the "Tian" symbol in the figure
Remember), the two drop-down menus on the left can set the border type and thickness.
6. After the above operations are completed, re-select the column of "Format Applied to", select "Title Line", set the lower border of the title line, and set the border type and thickness as required.
7. Click OK after setting, then select "Title Line" in the "Apply Special Format to" option, and then click Apply to apply the style of three-line table to the current table, and you're done.
8. As long as you don't create a new style for other tables after the operation in the second step, just select "three-line table" in the list and apply the style directly.
(Hint, sometimes the setting is not very good, for example, three lines will be set to the same thickness. In this case, it can be directly applied after step 5, and then the "three-line table" style can be modified and directly applied in step 6. Setting Step 5 and Step 6 separately and applying them should solve the problem. )
Method supplement:
A supplement to the method of directly modifying the original table into a three-line table;
After step (3), select the whole table with title bar (the first row), right click → border and shading → contents under the border → select the desired border line width (such as 1/2 points) → click in the preview on the right to draw a border line with the corresponding width in the lower border → OK. Form completion
This method can be used when there are not many tables in the text. If you want to use a lot, it will be much more convenient to create a new table with the above method.
How to use format brush in Word?
The format brush can be said to be one of the very powerful functions in Word. With the format brush function, our work will become simpler and time-saving. When a large amount of content in a document is repeatedly added with the same format, we can use the format brush to complete it. The following is a detailed introduction of the function, purpose and usage of the "format brush" by the author of the website "One Hundred Thousand Why Computers", hoping to improve everyone's work efficiency in daily work.
Format brush function: copy any format such as text format and paragraph format;
Format brush shortcut keys: Ctrl+Shift+C and Ctrl+Shift+V;
Where is the format brush and its location: the format brush is above the "standard toolbar" and next to the paste;
Use of format: First, use the cursor to select a formatted word or paragraph in the document, then click the Select Format Brush, and then click the word or paragraph whose format you want to replace. At this point, they will be in the same format as you originally selected.
Operation demonstration, how to use the format brush?
The use of the format brush has been explained in detail above, and you may still be a little confused. Let me make a graphic demonstration, I hope you can understand it more easily. Please read it carefully!
As shown below, I entered five lines of "Welcome to the Word Alliance!" On the first line, I set them in "red" and "bold" formats, but other lines are the default formats. Now, I will use the format brush function to copy the format in the first line to the other four lines.
The first step is to choose "Welcome to the Word Union!" On the first line, click the "Format Brush" button on the standard toolbar;
Step 2: At this point, something similar to a brush will appear on the left side of the cursor, and select the second line with the mouse; After releasing the mouse, you can find that the second line has completely copied the format of 1 line! ~
After copying the format, you will find that the small brush next to the mouse disappears again and the cursor returns to the default time. If you want to continue, please repeat the previous steps.
Skills of using the format brush: Is it too much trouble to repeat the same steps every time you use the format brush? If a document has many formats to copy, isn't it necessary to press the format brush button repeatedly n times? Tell you a good idea. Previously, we just "clicked" the format brush button. If we want to copy the format once and continue to use the format brush, we can double-click the format brush button with the mouse, so that a small brush will always appear on the left side of the mouse, and we can continue to use the format brush. To cancel, you can click the format brush button again, or use the Esc key on the keyboard to close it.
How to enter a percent sign in Word?
Through the network survey, the author found that many netizens are using WORD software to input some special symbols, usually only some square meters, cubic meters, diameter symbols and so on. And many netizens still don't know how to type the Celsius symbol in Word.
Although some small symbols are rarely used, we still need to master them. Maybe they will be used one day! Below, the author will explain to you how to use various methods to play the Celsius symbol in Word!
First, use various input methods to input the Celsius symbol! Sogou input degrees Celsius:
① Click sogou's "Keypad" and select "Special Symbol";
② Then select "number/unit" from the pop-up special symbol, and then you can see the symbol "Celsius" in the lower left corner.
QQ Input Method Centigrade Symbol Input Method:
① Click a "wrench icon" on the far right of QQ input method, and then select "symbol";
② Select "Number/Unit" on the left of the pop-up symbol input device, and then you can find the desired "Celsius" on the right.
Second, the skills of inputting celsius symbols in Word2003 ① open Word2003 and click "special symbol" in the menu bar "insert";
② You can find the "Celsius" symbol you want in "Unit Symbol".
Third, how to type the centigrade symbol in Word2007? Click the Insert tab, select "More" in the Special Symbol option group, then select "Unit Symbol" and select the Celsius symbol to confirm.
How to add the desired screenshot to the word document, computer practice.
Word documents should be used by many people, just a matter of proficiency. Let's talk about how to take a screenshot of the picture we want and put it in a Word document. Of course, this is a difficult problem for many friends who are new to computers or computers. Many people don't know how to take screenshots. First of all, how to take a screenshot. ?
We can find the pictures we have saved, or we just found a favorite picture on the web page. Let's talk about the method. We can log in to qq, find any dialogue window and click the screenshot, which is the eighth icon in the QQ window. There is a box with scissors icon at the bottom. This is the tool we are looking for. For convenience, let me tell you how to click the button.
After finding it, select the range of the picture you want, then right-click to save it to the desktop and set an easy-to-remember name, such as a number.
Finally, drag the picture we want directly to the specified position in word. See if it works. What are you waiting for? Operate it.
How does Word combine words and pictures at will?
When we write articles in word, we often insert some pictures, which will make the articles more readable. The combination of pictures and articles can better reflect the main idea of the article. Many people know that illustrations are needed when writing articles, but some people don't know the reasonable combination of pictures and texts. Next, I will tell you the random combination of words and pictures.
First, open a word document and insert a picture into the existing article content:
At this point, we will see the picture alone under the text, which is not compact enough. This requires us to arrange the position of words and pictures reasonably. Click the picture with the mouse, and a toolbar will appear:
Click the text wrapping selection and then select the compact wrapping, and you can drag the picture to any paragraph position at will.
We can combine pictures and words organically to make the composition of the article more complete, so tips are very important and I hope they will help you.
Want to know how to use word in wps?
In word documents, it is common that people don't know how to count words. Here, I will teach you how to count. First, we need to open the word document of wps, and then there is a word mark at the bottom of the computer screen, which is used to count the number of words. Let's have a look.
In addition, some people say that the 2003 version of word doesn't know how to view it. Let me tell you something. Open word software, click Tools on the desktop, and then click Word Count. There will be word count, including whether the number of pages, words and spaces are counted, as well as detailed descriptions of the number of lines, non-Chinese characters, Chinese characters and Korean. What are you waiting for? Let's get started!
Some people can't change the font. Actually, the font is on the title bar. Just click on the icon of the inverted triangle if it is marked. There are many fonts for us to choose from. There is also a font size next to it, which is also an inverted triangle icon. When you click on it, many font sizes will appear. Just click on the one you want to choose.
;