Method one
1, use WORD to automatically generate the table of contents according to the article chapters.
-1. Select [Style and Format] in [Format].
-2. The column "Style Format" appears on the right, mainly using the titles 1, 2 and 3. Apply the title 1, title 2 and title 3 to the titles of all chapters in the text, and a black dot will appear before the titles after successful setting.
-3. Of course, the attributes of title 1, title 2 and title 3 (such as font size, center, bold, etc. ) you can modify it yourself. Modification method: right-click "Title 1" and select "Modify" to open a menu of modification, which you can modify according to your own requirements.
-4. When everything is defined, the directory can be generated. Move the cursor to the blank position where you want to insert the directory at the beginning of the article, and select [Insert]-[Reference]-[Index and Directory ]-5. Select the second tab [Contents], and then click OK in the lower right corner.
⊙ Read what you are looking for.
Method: Just hold down Ctrl and click a chapter in the table of contents, and then jump directly to the page.
If you need to modify the content of the article again, updating the table of contents will re-map the table of contents to the corresponding page number.
Method: In the directory area, right-click and select [Update Domain].
2. Set the header and footer
-1. Insert → Separator → Page Break → Next page to be separated. At this point, the article is divided into two sections.
-2. Insert header and footer: view → header and footer;
-3. As you can see in the above picture, "Same as the previous section" in the red box means that the format and content of the two sections are the same. If you want to make the format of the two sections different, click the "Link to the previous section" button, and the words "Same as the previous section" will disappear. At this time, the two plates are independent and different. You can insert headers and page numbers in different formats.
Method 2
Word document with large chapters and small chapters. How to extract chapters and generate a table of contents?
WORD → Click the location to insert → Insert menu → Index and Table of Contents → Table of Contents → OK.
A table of contents is usually an indispensable part of a long document. With the table of contents, users can easily know what is in the document and how to find it. Word provides the function of automatically generating the table of contents, which makes it very simple to make the table of contents, and after the document changes, you can also use the function of updating the table of contents to adapt to the changes of the document.
1, create the title directory.
Word usually uses the title or outline level to create a table of contents. Therefore, before creating a table of contents, you should ensure that the built-in heading styles (heading 1 to heading 9) have been applied to the headings to be displayed in the table of contents. You can also apply styles that include outline levels or custom styles. If the structure and performance of the document are good, it will be very fast and easy to create a qualified directory.
1. 1. Create a directory according to the title style.
The steps to create a table of contents according to the title style are as follows:
(1) Move the cursor to the position you want to drag in the directory.
(2) Click the menu item of the menu item and select the tab in the pop-up dialog box.
(3) Select the style of the directory in the list box, through which you can view the selected results. If selected, it means that the built-in directory style (directory 1 to directory 9) is used to format the directory. If you want to change the style of the directory, you can click the button to modify the corresponding directory style by changing the style.
1.2, create a directory from other styles.
For example, if you want to create a table of contents from documents with different styles, you don't need to create a table of contents according to the styles to, but create a table of contents according to the custom styles to, as shown below:
(1) Move the cursor to the location where you want to insert the directory.
(2) Open the dialog box, and then click the button to pop up the dialog box.
(3) Find the style used by the title in the list box, and then specify the level of the title in the text box. If you don't want to use styles, delete the numbers in the text box. For example, users can delete the numbers after the title 1, title 2 and title 3.
(4) Click the button to return to the dialog box.
(5) Select the appropriate option in the dialog box, and then click the button.
2. Create a chart directory
Chart table of contents is also a common table of contents, which can list descriptions and page numbers of pictures, charts, graphs, slides or other illustrations. When creating a table of figures, users can arrange the table of figures according to their captions or custom table labels, refer to the page order, and finally display the table of figures in the document.
Use headings to organize the table of contents, as follows:
(1) Make sure that the pictures, tables and charts in the document to be cataloged have titles.
(2) Move the cursor to the place where you want to insert the chart directory.
(3) Click the menu item in the menu and select the tab in the dialog box.
(4) In the drop-down list box, select the title of the directory to be created, such as chart, formula and table.
(5) Select the directory format in the drop-down list box. Other options are the same as creating a universal directory. Click OK, and then click the button.
After checking the chart table of contents, when you move the mouse to the table of contents, the mouse pointer will change into a hand shape, and click the left mouse button to jump to the corresponding position.
It is very convenient to use captions to create a table of contents, but sometimes the annotations in a document are typed by users themselves, not added by the caption function of Word. At this point, you need to use a custom style to create a chart table of contents, as shown below:
(1) Open the dialog box and select the tab.
(2) Click the button to pop up the dialog box.
(3) Select the check box, select the style name used for chart labels in the drop-down list box on the right, and then click the button.
(4) Select an option in the dialog box, and then click the button.
3. Create a quotation
Citation catalogs are similar to other catalogs, and different citation catalogs can be created according to different citation types. Before creating a reference table, you should ensure that there are corresponding references in the document. The operation steps of creating a citation catalogue are as follows:
(1) Move the cursor to the position where you want to insert the quotation.
(2) Click the menu item in the menu and select the tab in the pop-up dialog box.
(3) Select the corresponding citation category in. Note that this category should be an existing citation type in the citation.
(4) The created citation catalog also has corresponding built-in citation catalog styles that can be applied. If you want to change it, you can click the button.
(5) If the citation exceeds five pages, you can select the check box to avoid the inconvenience caused by too many pages.
(6) If the quotation is too long, you can choose to keep the original quotation format.
(7) After selecting the list header and format of the directory, click the button to insert the reference table.
If you want to mark citations to create a suitable citation directory, you can do it as follows:
(1) Select the citation to mark.
(2) Click the button to pop up the dialog box.
(3) Select the appropriate type in the drop-down list box.
(4) Click the button to mark the currently selected text. If you click this button, the selected text already in the document will be marked.
(5) If you want to mark other quotations, don't close the dialog box, and directly select the quotation to mark in the document.
(6) Return to the dialog box, the selected quotation will appear below, and then click.
(7) If you want to modify the existing category, you can click the button to pop up the dialog box.
(8) Select the category to be modified, enter the text to be replaced in the text box below, and click the button.
(9) Click the button to return to the dialog box after completion. Click the button.
4, update the directory
The directory created by Word is based on the content of the document. If the document content changes, such as page number or title, you need to update the table of contents to make it consistent with the document content. It is best not to modify the directory directly, which will easily lead to inconsistency between the directory and the document content.
After creating a directory, if you want to change the format of the directory or display the title, you can create the directory again and re-select the format and display level. After the operation, a dialog box will pop up asking whether to replace the original directory, and you can choose to replace the original directory.
If you just want to update the data in the directory to adapt to the changes in the document, instead of changing the format of the directory and other items, you can right-click the directory and click the menu item in the pop-up shortcut menu. Users can also select a directory and press F9 to update the domain.
Method 3
The catalogue is made in three steps.
1) Modify the format of the heading style.
Usually, the title style built into Word does not meet the requirements of the paper format and needs to be modified manually. Click Format | Styles on the menu bar, select All Styles from the list drop-down box, click the corresponding heading style, and then click Change. Modifiable contents include font, paragraph, tab stop, number, etc. The format of the title 1-3 is modified according to the requirements of the paper format.
2) Apply the corresponding format to the title paragraph of each chapter.
The title of the chapter is "Title 1", the title of the section is "Title 2" and the title of the third level is "Title 3". Another advantage of using styles to format titles is that it is very convenient to change the title format. If you want to change the font size of all the first-level titles to small three, you only need to change the format setting of the "title 1" style and then update it automatically. The font size of all chapters will be changed to small three, which is troublesome and easy to make mistakes without manual modification. For information about how to apply styles and automatically update styles, see Word Help.
3) extract the directory
According to the requirements of the paper format, the table of contents is placed in front of the text. Insert a new page before the text (insert a page break before the title of the first chapter), move the cursor to the beginning of the new page, add the word "table of contents" and set the format. For a new paragraph, select Insert | Index and Table of Contents in the menu bar, click the Table of Contents tab, and the display level is level 3. Don't change anything else. After confirmation, Word will automatically generate the table of contents. If a chapter title is not in the directory, it must be that the title style is not used or used improperly, and there is something wrong with the directory generation, not Word. Please go to the corresponding chapter to check. After that, if the chapter title changes or the page number changes, just update the table of contents.
Note: After generating the table of contents, sometimes the table of contents text will have gray shading, which is the field shading of Word and will not be printed when printing (if you are willing to waste a piece of paper, you can try to print the table of contents). On the View tab of Tools | Options, you can set how field shading is displayed.
Method 4
1, typesetting the full text in Word;
2. Select the first-level title, then click the "Text" drop-down menu in front of "Font" in the toolbar and select "Title1";
3. At this point, a black dot will appear in front of the line, indicating that the line has been set as a directory item (the black dot in front will not be printed);
4. Set the paragraphs and fonts of this line until you are satisfied;
5. Place the cursor on the directory line just filtered, and then click the format brush on the toolbar to format all the titles in the text that need to be set as first-level titles in a unified format;
6. According to steps 2-5, set the second and third levels in this paper in turn;
7. Place the cursor at the position where the directory needs to be placed in the text, click Insert-Index and Directory in the menu, and make appropriate settings in the directory menu. You can also use the default values without modification and confirm.
8. At this point, the directory will be automatically generated;
9. If you want to modify the font and font size of the directory, you can select the directory to modify it; When choosing, be careful not to click directly on the directory, but put the mouse on the left side of the directory, click when the cursor becomes an empty arrow, and the whole directory will be selected and modified. If you only want to modify a line, put the cursor at the end of the line and drag it forward.
10. If a title in an article changes, you can right-click the changed generation directory and click "Update Domain" in the right-click menu, and the modified location will be automatically modified.
Source: Duanqin Net