① How to evaluate the title of assistant engineer?

Meet the requirements, with relevant information, fill in the form and hand it in.

Applicants must bring the original and photocopy of valid documents (ID card, passport), fill in the registration form, and the examination room personnel will input the registration information into the computer on the spot. The application information must be accurate and complete, and checked and signed by the applicants (photo information should be collected before the entrance examination). The admission ticket is printed and distributed on the spot.

Professional title evaluation requirements:

1. Applicable object: people working in professional and technical posts. (Not applicable to civil servants)

2. Grade and conditions of initial evaluation of professional titles: (Different academic evaluation time is different)

(1) After graduating from technical secondary school and working for one year, you can initially set up "rank title"; After four years of professional and technical work after the initial "officer-level title", the initial "assistant-level title" can be re-established;

(2) After graduating from junior college and working for one year, you can initially set up a "member-level title"; Professional work for two years, you can initially set the title of "assistant";

(3) After graduating from college and working for one year, you can initially set the title of "Assistant";

(4) Master's degree holders who have worked in this major for three years can initially set up "intermediate titles";

(5) Doctoral degree winners can be defined as "intermediate titles";

3. Materials to be provided:

(1) The original and photocopy of the ID card, academic certificate and professional title certificate of the person who intends to declare the professional title;

(2) 4 recent one-inch bareheaded photos;

4, reporting procedures and formalities:

(1) Conduct qualification examination and academic qualification examination for those who intend to apply for professional titles, and issue blank forms of the Application Form for Qualification of Junior Professional and Technical Positions;

(2) I fill out the Application Form for Primary Professional and Technical Qualification in duplicate;

(3) the personnel department of the unit conducts a comprehensive assessment of its morality, ability, diligence and performance, and if it passes the assessment, it will report the relevant materials to the municipal talent market.

(4) After being audited by the Municipal Professional Title Office, qualification documents and certificates will be issued.

(1) Evaluation conditions for assistant engineers Extended reading: Qualifications:

(1) has the ability to complete general technical work.

(2) be familiar with and correctly use the basic theoretical knowledge and professional technical knowledge of this major.

(3) To undertake engineering and technical work in a certain field or important post and be able to perform post responsibilities.

(4) graduated from a master's degree, a second bachelor's degree or a postgraduate class, or obtained a bachelor's degree or a bachelor's degree. Engineering and technical posts have been internship for 1 year, passed the examination, or graduated from junior college, engaged in technician work for more than 3 years, or graduated from secondary specialized school, engaged in technician work for more than 4 years (those who are truly talented and have made outstanding contributions are not subject to this restriction).

References:

Network-Assistant Engineer ② What are the requirements of an assistant engineer?

1. After graduating from technical secondary school, those who have worked for four or six years and have not been recognized as technicians must take the exam and pass the examination before they can obtain the qualification of assistant title.

2. Graduated from junior college, with three years of work experience, and passed the examination, and recognized the qualification of assistant title.

3. After graduating from undergraduate course, you will be qualified as an assistant after the one-year internship period expires.

4. After obtaining a master's degree, you have been engaged in this major for 3 years, and you can obtain the qualification of intermediate title after passing the examination.

5, doctoral degree winners, those who pass the examination, can initially have the qualification of intermediate title.

(2) Extended reading for evaluation conditions of assistant engineers

Registration method

Applicants must bring the original and photocopy of valid documents (ID card, passport), fill in the registration form, and the examination room personnel will input the registration information into the computer on the spot.

The application information must be accurate and complete, and checked and signed by the applicants (photo information should be collected before the entrance examination). The admission ticket is printed and distributed on the spot.

Application material

In order to ensure the authenticity of the application materials, after verification by the applicant, the following main materials are submitted as required, involving academic qualifications, professional years, examination results, working years, my working ability, main achievements and rewards and punishments:

1, assistant:

Need to submit: two one-inch and two-inch photos, two copies of ID card, one copy of academic certificate, one work summary and one technical report.

2, intermediate title:

Need to submit: four one-inch and two-inch photos, two copies of ID card, copy of academic certificate, assistant engineer title, copy of original title, resume, computer title, English title, work summary, professional papers with more than 5,000 words, award certificate and evaluation form need to be stamped by our unit.

3. Advanced:

Need to submit: four one-inch and two-inch photos, two copies of ID card, one copy of academic certificate, one original of intermediate title, personal resume, work summary, successful case of project (project), professional and technical letter of appointment, professional papers with more than 5,000 words, and the evaluation form needs the seal of the unit.

The above information is complete and meets the requirements. After the audit, the review will be completed within three to six months, and the national title and relevant qualification certificates will be issued.

(3) How do individuals apply for the evaluation of junior assistant engineers?

The evaluation of junior assistant engineers run by the Personnel Bureau is as follows:

Assistant engineers are not all audited and evaluated, and they look at diplomas. Undergraduate graduates recognize, graduate students do not recognize assistant engineers; The question about assistant engineer should be combined with your own situation: if it is because the company has no chance, do you want to put your account in the company? If it is in the talent exchange center, then the talent exchange center can give you an evaluation; If you are in your company (less likely), you can go through the personnel bureau. Of course, you should have the requirements of the personnel bureau, such as articles, computer exams, English exams, etc.

Application conditions for assistant title evaluation

1, technical secondary school graduates, after a probation period of one year, can obtain the preliminary evaluation qualification; Professional qualification for four years, initially determine the assistant level title qualification (after graduating from technical secondary school for five years, can directly initially determine the assistant level title qualification);

2, college graduates, after the probation period of 1 year, and then engaged in the professional and technical work for 2 years, after passing the examination, can be initially qualified for the title of assistant;

3, undergraduate graduates, after a probation period of one year, can be competent for the title of assistant;

4. After obtaining a master's degree, you have been engaged in this major for 3 years, and you can obtain the qualification of intermediate title after passing the examination;

5, doctoral degree winners, those who pass the examination, can initially have the qualification of intermediate title.

Special attention: majors (such as economics, accounting, statistics, auditing, etc. Those who implement the national qualification examination must be full-time graduates of ordinary colleges and universities recognized by the national education administrative department (now the Ministry of Education).

Prerequisites for professional title evaluation

We must handle the "personnel agency" in the talent market, that is, the file attachment. On the other hand, it is the time problem of professional title evaluation, that is, it meets the evaluation conditions. On the question of where to evaluate, some units do it for them. Directly by the personnel department of the unit with your information to the talent market. Some of them are handled by myself-these comrades personally entrust personnel agents. The handling place is the personnel bureau of the talent market.

④ How to evaluate the title of assistant engineer?

Professional title evaluation requirements:

1. Applicable object: people working in professional and technical posts. (civil servants can't)

2. Grade and conditions of initial evaluation of professional titles: (Different academic evaluation time is different)

(1) After graduating from technical secondary school and working for one year, you can initially set up "rank title"; After four years of professional and technical work after the initial "officer-level title", the initial "assistant-level title" can be re-established;

(2) After graduating from junior college and working for one year, you can initially set up a "member-level title"; Professional work for two years, you can initially set the title of "assistant";

(3) After graduating from college and working for one year, you can initially set the title of "Assistant";

(4) Master's degree holders who have worked in this major for three years can initially set up "intermediate titles";

(5) Doctoral degree winners can be defined as "intermediate titles";

Provide materials:

(1) The original and photocopy of the ID card, academic certificate and professional title certificate of the person who intends to declare the professional title;

(2) 4 recent one-inch bareheaded photos;

3, reporting procedures and formalities:

(1) Conduct qualification examination and academic qualification examination for those who intend to apply for professional titles, and issue blank forms of the Application Form for Qualification of Junior Professional and Technical Positions;

(2) I fill out the Application Form for Primary Professional and Technical Qualification in duplicate;

(3) the personnel department of the unit conducts a comprehensive assessment of its morality, ability, diligence and performance, and if it passes the assessment, it will report the relevant materials to the municipal talent market.

(4) After being audited by the Municipal Professional Title Office, qualification documents and certificates will be issued.

(4) Extended reading of evaluation conditions for assistant engineers:

Matters needing attention

(1) After graduating from university, the professional and technical work should be the same as (or similar to) the major studied before the title can be preliminarily determined;

(2) majors (such as economics, accounting, statistics, auditing, etc.). To implement the national qualification examination, you must be a regular full-time college graduate recognized by the State Education Commission before you can initially determine your professional title;

(3) Professional and technical personnel who do not meet the requirements of initial professional titles can participate in the professional knowledge training organized by the personnel department according to regulations, and go through the formalities of professional title declaration according to the examination and approval procedures after passing the examination and obtaining the certificate of completion;

(4) Health technicians working in medical and health institutions shall take national examinations to obtain professional and technical qualifications, and do not directly apply for initial titles;

(5) My work summary must truly and comprehensively reflect my professional and technical work, with no less than 800 words.

(6) Before full-time vocational college graduates apply for assistant engineers, they need to fill in the professional and technical title evaluation form and resume, and they can participate in the professional and technical title evaluation only after passing the evaluation.

References:

Network assistant engineer

⑤ Evaluation conditions for intermediate engineers

Basic conditions for evaluation of intermediate engineers:

I. Education and qualifications

The applicant shall meet one of the following conditions:

1, PhD student;

2. After graduating from a master's degree, he has been engaged in professional work for 3 years;

3. After graduating from undergraduate course, he has been engaged in professional work for 5 years;

4, after graduating from college, engaged in professional work for 7 years;

5. After graduating from college or above, he has obtained the professional and technical qualification (post) of assistant division level for 4 years;

6. 1982 Obtained secondary school education before the end of the year, and engaged in reporting professional work for over 15 years.

Second, foreign language proficiency conditions

Applicants must hold the national foreign language grade B professional title certificate obtained in 2000 and later, and the qualified results of the year or the notice of foreign language grade. Those who joined the work before the end of 1977 and scored 45 points or above in the foreign language grade examination for professional titles in 2004 and later can declare. Persons who meet one of the following conditions may be exempted from the test:

1, college degree or above in foreign languages;

2. Get a master's degree or above;

3. Have the corresponding study abroad experience recognized by the state (the study abroad experience must be recognized by the Chinese embassy in the country and issued by the returned overseas students, or certified by the study abroad service center of the Ministry of Education);

4. Published foreign language monographs and translated works ("foreign language monographs and translated works" refer to works (including technical works) written and translated in foreign languages by myself independently or as the main translator, which are official publications);

5. Engaged in professional and technical work in grass-roots units below the township level ("grass-roots units below the township level" refers to grass-roots units directly under the township level or under its jurisdiction);

6. Take the foreign language examination for the candidates of BFT training, and pass the first level.

Three, the computer application ability conditions

Anyone born on or after June 1 960 65438+1October1should take the computer application proficiency test for professional technicians in Beijing or the national computer application proficiency test for professional technicians and obtain the qualification certificates of three modules. Persons who meet one of the following conditions may be exempted from the test:

1, college degree or above in computer science and technology (including computer and application, computer software, computer science education, software engineering, computer devices and equipment, computer information management, computer network);

2. Get a master's degree or above;

3, to participate in the national computer software professional and technical qualification examination to obtain a programmer or above qualification certificate.

Note: The titles of junior, intermediate and senior in engineering series are called assistant engineer, engineer, senior engineer and special engineer respectively, but there is no such thing as intermediate engineer, and the word "intermediate" is usually added, because the word "engineer" is already rampant. The accurate title should be intermediate title.

(5) Extended reading of evaluation conditions for assistant engineers:

List of application materials for intermediate engineer evaluation:

1, professional and technical post evaluation form (in duplicate for juniors and juniors) and attachment form (in duplicate); The main performance column in the front form should be filled in in detail.

2, last year's "professional and technical personnel assessment registration form".

3, professional papers and business work summary.

4. Submit the original graduation certificate and junior professional title certificate.

5, the need for professional and technical personnel level ability test certificate.

6. Other relevant materials that can reflect my work ability and important performance.

7. Six one-inch color photos and two copies of ID card and diploma.

Note: Anyone who fails to prepare relevant materials according to the above requirements will not be accepted.

⑥ What are the procedures for assistant engineers to audit?

Coordinate Wuhan, our company declares the title, and the process of evaluating Wang is as follows:

First, the reporting conditions

1, graduated from engineering (except computer and communication), engaged in engineering-related work.

2. Graduated from junior college for 3 years and graduated from undergraduate course 1 year.

3. Provide the official seal of Wuhan Engineering Company

Two. List of application materials

1, scanned copy of academic certificate

2. A scanned copy of the front and back of the ID card

3, 2 inch blue background electronic photos

4. Xue Xin. Com to download the electronic record form of academic certificate.

5. If you have a bachelor's degree, you need to provide a scanned copy of the bachelor's degree.

6. Electronic submission of reports.

Prepare electronic files first, register and pay fees after verification, and then prepare paper files.

Third, submit the materials to the Human Resources and Social Security Bureau and wait for the evaluation results.

⑦ What certificates do assistant engineers need to prepare?

Main title

Evaluation engineer

Professional classification: material forming and control engineering, civil construction, civil structure, civil supervision, civil engineering, rock engineering, geotechnical engineering, geotechnical excavation, mining engineering, landscape architecture, gardening, landscape architecture, landscaping, ancient buildings, civil engineering, civil engineering installation, architecture, construction management and architectural design. Electric power, electronics, electronic information, electronic system, electricity, electrical engineering, electrical equipment, electrical automation, industrial automation, physics, refrigeration and air conditioning maintenance, HVAC, HVAC installation, corrosion and protection, thermal power, electromechanical, electromechanical engineering, mechatronics, hull engineer, marine engineer, photoelectric technology, chemical industry, chemical machinery, machinery, machinery manufacturing, machinery design and manufacturing. Water conservancy and hydropower, hydropower, water heating, hydropower installation, hydropower engineering, water supply and drainage, boilers, kilns, roads and bridges, tunnel engineering, computer technology, environmental engineering, computer and its application, municipal engineering, municipal road engineering, building budget and final accounts, budgetary estimate, structure, structural design, communication, safety, lecturer, etc.

Assistant mechanical engineer

Professional title condition

1, with practical ability to complete general technical work.

2. Be able to use the basic theoretical knowledge and professional technical knowledge of this major.

3. Obtain a master's degree or a second bachelor's degree and pass the inspection; Obtain a bachelor's degree or bachelor's degree, and practice in an engineering and technical post for one year; Graduated from junior college and worked as a technician for more than two years; Graduated from technical secondary school and worked as a technician for more than four years.

Title evaluation of assistant mechanical engineer

The junior title (assistant engineer) is well received, and the procedures are similar everywhere. As long as you meet the requirements and hold relevant information, you will complete the submission. For more detailed information, please consult the local personnel bureau. The following are the evaluation requirements and precautions for the title of assistant mechanical engineer for reference:

Related requirements:

1. Applicable object: people working in professional and technical posts. (Not applicable to civil servants)

2. Grade and conditions of initial evaluation of professional titles: (Different academic evaluation time is different)

(1) After graduating from technical secondary school and working for one year, you can initially set up "rank title"; After four years of professional and technical work after the initial "officer-level title", the initial "assistant-level title" can be re-established;

(2) After graduating from junior college and working for one year, you can initially set up a "member-level title"; Professional work for two years, you can initially set the title of "assistant";

(3) After graduating from college and working for one year, you can initially set the title of "Assistant";

(4) Master's degree holders who have worked in this major for three years can initially set up "intermediate titles";

(5) Doctoral degree winners can be defined as "intermediate titles";

3. Materials to be provided:

(1) The original and photocopy of the ID card, academic certificate and professional title certificate of the person who intends to declare the professional title;

(2) 4 recent one-inch bareheaded photos;

4, reporting procedures and formalities:

(1) Conduct qualification examination for the personnel who intend to apply for professional titles, check them, and issue a blank form of the Application Form for Qualification of Junior Professional and Technical Positions;

(2) I fill in the "Application Form for Qualification for Junior Professional and Technical Positions" in duplicate;

(3) the personnel department of the unit conducts a comprehensive assessment of its morality, ability, diligence and performance, and if it passes the assessment, it will report the relevant materials to the municipal talent market.

(4) After being audited by the Municipal Professional Title Office, qualification documents and certificates will be issued.

Precautions:

(1) After graduating from university, the professional and technical work should be the same as (or similar to) the major studied before the title can be preliminarily determined;

(2) majors (such as economics, accounting, statistics, auditing, etc.). To implement the national qualification examination, you must be a regular full-time college graduate recognized by the State Education Commission before you can initially determine your professional title;

(3) Professional and technical personnel who do not meet the requirements of initial professional titles can participate in the professional knowledge training organized by the personnel department according to regulations, and go through the formalities of professional title declaration according to the examination and approval procedures after passing the examination and obtaining the certificate of completion;

(4) Health technicians working in medical and health institutions shall take national examinations to obtain professional and technical qualifications, and do not directly apply for initial titles;

(5) My work summary must truly and comprehensively reflect my professional and technical work, with no less than 800 words.

(6) Before full-time vocational college graduates apply for assistant engineers, they need to fill in the professional and technical title evaluation form and resume, and they can participate in the professional and technical title evaluation only after passing the evaluation.

What materials should be prepared for the evaluation of assistant engineers?

Assistant Engineer's materials for evaluating specific needs:

1, one one-inch and two-inch photos each;

2. Two copies of ID card;

3. Copy of academic certificate;

4. Work summary;

5. Technical report.

(8) Extended reading of evaluation conditions for assistant engineers:

Assistant engineer evaluation conditions

1. After graduating from technical secondary school, those who have worked for four years or have not been recognized as technicians for six years must take the exam and pass the examination before they can obtain the qualification of assistant title;

2. Graduated from junior college, worked for two years and passed the examination, and recognized the qualification of assistant title;

3. Graduated from a bachelor's degree and obtained the assistant qualification after one-year probation.

4. After obtaining a master's degree, you have been engaged in this major for 3 years, and you can obtain the qualification of intermediate title after passing the examination;

5, doctoral degree winners, those who pass the examination, can initially have the qualification of intermediate title.