"1" How do mechanical and electrical engineers take the exam, whether to take the exam or evaluate it?

Mechanical and electrical engineers have to take the exam.

Engineering titles are divided into "assistant engineer", "engineer", "senior engineer" and "professor-level senior engineer", and electromechanical engineers also belong to this category. Unless otherwise specified, electromechanical engineers refer to intermediate engineers.

Professional and technical personnel who have passed the initial title shall complete the corresponding continuing education hours during their term of office after working for a certain number of years. Those who apply for intermediate or above titles must publish papers in professional journals and pass some basic skills tests (such as proficiency in foreign languages and computer applications). ), submit the evaluation materials to the judges of this professional evaluation committee, and then the professional judges of this major will determine whether they have higher professional title qualifications.

Examination conditions for engineer title examination:

1, graduated from technical secondary school: after practicing in the same or similar professional post for 1 year, you can be recognized as a technician and have been engaged in professional and technical work for 4 years, you can be recognized as an assistant engineer.

2. Graduated from junior college: after practicing in the same or similar professional position for 1 year, you can be recognized as a technician, and after two years of professional and technical work, you can be recognized as an assistant engineer.

3. Bachelor's degree: after practicing in the same or similar professional position for 1 year, you can be recognized as an assistant engineer, and after 4 years of professional and technical work, you can be promoted to engineer (intermediate).

Registration method for engineer title examination:

Applicants must bring the original and photocopy of valid documents (ID card, passport), fill in the registration form, and the examination room personnel will input the registration information into the computer on the spot. The application information must be accurate and complete, and checked and signed by the applicants (photo information should be collected before the entrance examination). The admission ticket is printed and distributed on the spot.

(1) Mechanical and electrical engineers review conditional extended reading;

Matters needing attention in intermediate engineer title examination:

1, candidates must pass all the required subjects (modules) in the same test center this year before they can obtain the certificate of conformity, otherwise the results will be invalid. First-time candidates can carefully choose test sites according to their registration and their own wishes.

2, professional and technical personnel working in the township subordinate units in the evaluation of professional and technical positions, the computer application ability test, as one of the necessary conditions.

3. Persons who evaluate and employ professional and technical positions (titles) within three years after obtaining a doctorate may be exempted from the examination.

4. Overseas students who have obtained doctoral degrees abroad may be exempted from examination if they are evaluated and hired for professional and technical positions (titles) within three years with the certificate of studying abroad issued by our embassy (consulate) after returning home.

5, obtain the national computer software professional and technical qualification (level) examination senior qualification.

"II" Assessment Conditions for Intermediate Engineers

Basic conditions for evaluation of intermediate engineers:

I. Education and qualifications

The applicant shall meet one of the following conditions:

1, PhD student;

2. After graduating from a master's degree, he has been engaged in professional work for 3 years;

3. After graduating from undergraduate course, he has been engaged in professional work for 5 years;

4, after graduating from college, engaged in professional work for 7 years;

5. After graduating from college or above, he has obtained the professional and technical qualification (post) of assistant division level for 4 years;

6. 1982 Obtained secondary school education before the end of the year, and engaged in reporting professional work for over 15 years.

Second, foreign language proficiency conditions

Applicants must hold the national foreign language grade B professional title certificate obtained in 2000 and later, and the qualified results of the year or the notice of foreign language grade. Those who joined the work before the end of 1977 and scored 45 points or above in the foreign language grade examination for professional titles in 2004 and later can declare. Persons who meet one of the following conditions may be exempted from the test:

1, college degree or above in foreign languages;

2. Get a master's degree or above;

3. Have the corresponding study abroad experience recognized by the state (the study abroad experience must be recognized by the Chinese embassy in the country and issued by the returned overseas students, or certified by the study abroad service center of the Ministry of Education);

4. Published foreign language monographs and translated works ("foreign language monographs and translated works" refer to works (including technical works) written and translated in foreign languages by myself independently or as the main translator, which are official publications);

5. Engaged in professional and technical work in grass-roots units below the township level ("grass-roots units below the township level" refers to grass-roots units directly under the township level or under its jurisdiction);

6. Take the foreign language examination for the candidates of BFT training, and pass the first level.

Three, the computer application ability conditions

Anyone born on or after June 1 960 65438+1October1should take the computer application proficiency test for professional technicians in Beijing or the national computer application proficiency test for professional technicians and obtain the qualification certificates of three modules. Persons who meet one of the following conditions may be exempted from the test:

1, college degree or above in computer science and technology (including computer and application, computer software, computer science education, software engineering, computer devices and equipment, computer information management, computer network);

2. Get a master's degree or above;

3, to participate in the national computer software professional and technical qualification examination to obtain a programmer or above qualification certificate.

Note: The titles of junior, intermediate and senior in engineering series are called assistant engineer, engineer, senior engineer and special engineer respectively, but there is no such thing as intermediate engineer, and the word "intermediate" is usually added, because the word "engineer" is already rampant. The accurate title should be intermediate title.

(2) Mechanical and electrical engineers review conditions for extended reading:

List of application materials for intermediate engineer evaluation:

1, professional and technical post evaluation form (in duplicate for juniors and juniors) and attachment form (in duplicate); The main performance column in the front form should be filled in in detail.

2, last year's "professional and technical personnel assessment registration form".

3, professional papers and business work summary.

4. Submit the original graduation certificate and junior professional title certificate.

5, the need for professional and technical personnel level ability test certificate.

6. Other relevant materials that can reflect my work ability and important performance.

7. Six one-inch color photos and two copies of ID card and diploma.

Note: Anyone who fails to prepare relevant materials according to the above requirements will not be accepted.

(3) What are the conditions for obtaining the qualification certificate of mechanical and electrical engineer?

Requirements for applying for the certificate of electrical engineer:

1, bachelor degree or above or equivalent.

2. College degree or equivalent and relevant practical experience.

To participate in the professional examination of registered electrical engineers, you should pass the basic examination or meet the exemption conditions, and meet one of the following conditions:

1, having been engaged in electrical engineering design for 2 years after obtaining the doctor's degree in this major; Or after obtaining a similar professional doctorate, he has been engaged in electrical engineering design for 3 years.

1: Having worked in electrical engineering design for 3 years after obtaining the master's degree in this major; Or after obtaining a master's degree in a similar major, he has been engaged in electrical engineering design for 4 years.

3. After graduating from a double bachelor's degree or postgraduate class in this major, he has been engaged in electrical engineering design for 4 years; Or after graduating from a double bachelor's degree or graduate program in a similar major, he has been engaged in electrical engineering design for 5 years.

4. After obtaining a bachelor's degree or a degree that has passed the professional education evaluation, he has been engaged in electrical engineering design for 4 years; Or after obtaining a bachelor's degree or degree that has not passed the professional education evaluation, he has been engaged in electrical engineering design for 5 years; Or after obtaining a bachelor's degree or degree in a similar major, he has been engaged in electrical engineering design for 6 years.

5—— Having obtained a university degree in this major and engaged in electrical engineering design for 6 years; Or after obtaining a college degree in a similar major, he has been engaged in electrical engineering design for 7 years.

6. Obtain a bachelor's degree or above in other engineering majors and have been engaged in electrical engineering design for 8 years.

(3) Mechanical and electrical engineers review conditions for extended reading.

A, the role of electrical engineer certificate

(1) is an authoritative junior professional title certificate with high gold content, which can be used as a necessary certificate for bidding.

(2) To apply for an on-the-job electrical engineer, you must obtain an electrical engineer certificate before you can take up your post.

(3) Major enterprises must have a certain number of employment certificates to enhance their qualifications.

(4) You can test (evaluate) intermediate titles in the future.

(5) Enjoy welfare benefits such as increasing file salary.

Second, the electrical engineer certificate authority

The certificate of electrical engineer is issued by Ministry of Human Resources and Social Security with high authority. It is a compulsory voucher for bidding, which should be checked when applying for a position. Telephone, letter, window and other inquiry methods.

Three, electrical engineer certificate candidates

Power professional engineers and technicians engaged in survey, planning, design, power engineering construction, installation, debugging, technology development, experimental research, power generation and supply operation, maintenance, overhaul, power grid dispatching, power management, power environmental protection, power automation and technology management.

Four, electrical engineer certificate application guide

You need to prepare electronic photos or scanned copies of valid ID cards, one-inch or two-inch photos, and electronic photos of graduation certificates.

Five, the benefits of electrical engineer certificate

(1) Working with certificates is an important basis for employers to recruit, assess and promote their posts.

(2) It is an inevitable trend that every industry should hold relevant certificates, which is also advocated by the state.

(3) It is also a compulsory document for bidding. When inviting tenders, it is required that the number of titles and certificates of assistant engineers in the unit reach the standard.

Reference Network-Electrical Engineer

〔〔〔〔〔〔〔〔〔〔〔〔〔〔〔〔〔〔〔〔〔〔〔〔〔 12

Mechanical and electrical engineer certificate application conditions:

1. Assistant needs to submit: two one-inch and two-inch photos, two copies of ID card, one copy of academic certificate, one copy of work summary and one copy of technical report.

2. Intermediate titles need to be submitted: four one-inch and two-inch photos, two copies of ID cards, copies of academic certificates, titles of assistant engineers, copies of original titles, resumes, titles of computers and titles in English.

Work summary, professional papers with more than 5000 words, award-winning certificates and evaluation forms need to be sealed by the unit.

3. For the advanced level, 4 one-inch and two-inch photos, 2 copies of ID cards, copies of academic certificates, copies of original intermediate titles, resumes, work summaries and successful cases of projects (topics) shall be submitted.

Professional and technical letters of appointment, professional papers with more than 5,000 words and evaluation forms need to be sealed by the unit.

To take the exam, I apply, and the unit agrees to register with the local examination management institution. Examination management institutions shall issue admission tickets after passing the examination in accordance with the prescribed procedures and registration conditions.

Participants take the test at the time and place specified in the admission ticket. Professional and technical personnel of subordinate units of various departments and central management enterprises in the State Council signed up for the examination according to the principle of territoriality.

(4) Mechanical and electrical engineers review the extended reading conditions.

Electromechanical engineer

1, cooperate with the project manager in the daily management of the project department;

2. Be responsible for the overall management and process supervision of the electromechanical engineering construction of the project;

3. Cooperate with the project manager to organize the formulation of the overall planning, management scheme and process control documents of the electromechanical category of the project;

4. Participate in the discussion and review of the blue prints.the design, project construction organization design and major construction schemes, review and control the electromechanical design scheme of the project and major technical problems in the project construction, and put forward reasonable suggestions;

5, examination and approval of mechanical and electrical design, design drawings and design documents;

6. Participate in contract negotiation and team inspection between contractors and suppliers, and assist in project bidding;

7. Participate in and review the selection of main mechanical and electrical materials and equipment, and put forward the corresponding cost assessment report;

8. Attend the weekly and monthly meetings of the project, make a summary speech on the electromechanical work and plan for the next step.

9. Organize the supervisor and all contractors to conduct weekly and monthly evaluations on measurement quantity, behavior management and safe and civilized construction.

10. Organize and coordinate the implementation of electromechanical integrated pipeline (BIM).

How to evaluate the intermediate title of "Wu" in mechanical and electrical engineering

I. Evaluation conditions

Engineer (intermediate title): after graduating from university, he has served as an assistant for more than three years; After graduating from junior college, I worked as an assistant for more than four years. Directly declare the intermediate conditions, graduate from junior college for 5 years, graduate from undergraduate course for 4 years, and graduate from technical secondary school for 8 years to sign up for the evaluation.

Second, review the materials

1, Professional and Technical Job Evaluation Form (in duplicate for primary and middle school students)

2, professional papers and business work summary;

3. Other relevant materials that can reflect my work ability and important performance;

4 professional and technical personnel examination registration form;

5. Personal documents

6. Continuing education

7. Professional Title English Grade B

8. Each module of the title computer 4

Third, the title examination

1. English registration examination for professional titles

Intermediate engineer comprehensive or science and engineering class B.

2. Computer examination of professional titles

Four modules of the computer

Test-free conditions for professional title English

Professional and technical personnel who meet one of the following conditions may be exempted from foreign language examination:

1, with corresponding study abroad experience recognized by the state;

2. When applying for deputy senior professional titles, the scores of foreign language test for professional titles meet the requirements, and you need to take the same level test again when applying for senior professional titles;

3. Published foreign language monographs, proved to have a high level of foreign language through translation or other means, and confirmed by certain procedures;

4, confirmed by the audit, outstanding ability and performance, made an important contribution in the local industry;

5. Engaged in professional and technical work in grassroots units below the township level (with the approval of the Provincial Personnel Department, it can be relaxed to grassroots units below the county level);

6, in the following units in this city, engaged in agriculture, forestry, water conservancy, mining, surveying and mapping, exploration, railway construction, highway construction and other professional and technical fields for a long time;

7, older and engaged in professional and technical work for a long time;

8. Engaged in clinical medicine, ethnic medicine, arts and crafts, collation of ancient books, archaeology and other professional and technical work in the historical period with China characteristics and national traditions;

9. Obtaining a college degree or above in foreign language major and engaging in this major, and applying for a professional title requires mastering a second foreign language;

10. Persons who have applied for various series of junior titles and have industry or above qualifications;

1 1 obtained a master's degree and was recognized for the first time.

. Computer exemption conditions for professional titles

Meet one of the following conditions, can be exempted from taking the national computer application ability test for professional and technical personnel:

1, a person with the qualification of intermediate professional and technical positions in computer secondary specialized schools;

3. Persons who have obtained doctoral degrees;

4, to participate in the national computer software qualification and grade examination of qualified personnel;

5. Persons born before1960 65438+February 3 1;

6, conversion series to participate in professional and technical positions at the same level.

3. Continuing education

Complete 2 years of continuing education and study as required, and receive a certificate after passing the examination.

Fourth, assess the occupation.

Classification of engineers: civil engineering engineer, construction engineer, architectural design engineer, architectural decoration engineer, construction engineer, building management engineer, building water and electricity installation engineer, civil engineering engineer, water supply and drainage engineer, civil engineering engineer, surveying engineer, structural engineer, heating and ventilation engineer, safety engineer, geotechnical engineer, earthwork engineer, engineering survey engineer, municipal engineering engineer, Landscape architect, landscape architect, gardening engineer, landscape engineer, ancient building architect, corrosion and protection engineer, equipment installation engineer, road and bridge engineer, tunnel engineer, municipal engineer, municipal road engineer, budget engineer, electronic information engineer, electrical engineer, electrical engineer, electrical equipment engineer, electrical automation engineer, refrigeration and air conditioning maintenance engineer, thermal engineer, electromechanical engineer, Mechanical and electrical engineer, chemical engineer, mechanical engineer, mechanical manufacturing engineer, mechanical and electrical engineer, automobile maintenance engineer, water conservancy engineer, water conservancy and hydropower engineer, boiler, kiln, computer technology.

What are the requirements for the title declaration of "Lu" mechanical and electrical engineer 20 17?

What are the requirements for applying for the title of mechanical and electrical engineer 20 17?

Journal paper network ...11-1518: 01.

What are the requirements for applying for the title of mechanical and electrical engineer 20 17? Electromechanical engineer refers to an engineer who is engaged in the development, design, installation and debugging of mechanical and electrical products and parts, mainly working in industries such as numerical control, automobile and machinery. Mechanical and electrical engineers are divided into assistant mechanical and electrical engineers, mechanical and electrical engineers and senior mechanical and electrical engineers, among which mechanical and electrical engineers belong to intermediate titles, and the evaluation needs academic qualifications, paper conditions and performance conditions. Let's see how the mechanical and electrical engineers evaluate it and what conditions need to be met.

To apply for the qualification of 20 17 title of mechanical and electrical engineer, it is necessary to be an assistant mechanical and electrical engineer for more than 4 years, and then engage in the work consistent with the professional application. Different educational levels need to engage in different professional and technical work years. Graduated from college for five years, junior college for six years, technical secondary school for 65,438+00 years, and junior high school and below for 65,438+05 years. The qualification certification of assistant mechanical and electrical engineer is a prerequisite for evaluating mechanical and electrical engineers. Assistant mechanical and electrical engineers can generally be obtained by passing the examination of assistant mechanical and electrical engineers.

The application for the title of mechanical and electrical engineer 20 17 needs to meet the writing conditions of the paper, and must be written in person in combination with my work and post reality, and plagiarism is not allowed, with no less than 3,000 words. To apply for the title of mechanical and electrical engineer 20 17, it is necessary to publish more than three professional technical papers or one monograph in newspapers and periodicals at or above the prefecture level. The paper is an important carrier to reflect the knowledge level and professional level of professional and technical personnel, and it is also an important basis for the jury to comprehensively evaluate the applicants. It is also an important measure to evaluate talents objectively, fairly and accurately and ensure the quality of evaluation. Therefore, in the qualification evaluation of professional and technical posts, professional and technical personnel are required to provide participating papers reflecting their professional work level since taking office.

Besides the thesis, there are other ways to verify the applicant's professional level. 20 17 In addition to publishing papers, the application for the title of mechanical and electrical engineer can also obtain the title by hosting the fourth prize of national scientific and technological progress and spark plan, or the third prize of provincial and ministerial scientific and technological progress and spark plan, or the second prize of local (city) scientific and technological progress. If you have presided over the professional and technical work of medium-sized projects or medium-sized backbone enterprises for more than two consecutive years and achieved remarkable results during your assistant period, it is also possible to obtain a place (city). However, the so-called obvious benefits and remarkable achievements are vague concepts that need to be clarified by local accreditation bodies.

  1

First, the reporting conditions

(1) Necessary conditions:

1, support the party's line, principles and policies, adhere to the four cardinal principles, have good professional ethics and professionalism, abide by the law, and actively serve China's socialist economic construction.

2. Be in good health and be able to fully perform the duties of the present post.

3. The annual and term assessments since taking office are qualified or above.

4. The foreign language proficiency conforms to the relevant policies and regulations of the national and provincial foreign language examinations.

(two) education and service life, respectively meet the following conditions:

1. To apply for the post qualification of intermediate engineer, one of the following conditions shall be met:

(1) Obtained a master's degree in science and engineering or a double bachelor's degree in science and engineering, obtained the qualification of assistant engineer, and served as an assistant engineer for more than three years.

(2) graduated from a university of science and engineering or a college, obtained the qualification of assistant engineer, and served as an assistant engineer for more than four years.

(3) graduated from technical secondary school of science and engineering, won the honorary title of top-notch talents in science and technology at or above the provincial level, or the main participants in the first prize project of provincial and municipal science and technology awards, obtained the qualification of assistant engineer, and served as assistant engineer for more than four years.

2, to declare the qualification of senior engineer, meet one of the following conditions:

(1) obtained a doctorate in science and engineering, qualified as an engineer, and worked as an engineer for more than two years.

(2) obtain a master's degree in science and engineering or a double bachelor's degree in science and engineering, obtain the qualification of an engineer, and have worked as an engineer for more than four years.

(3) graduated from a university of science and engineering, obtained the qualification of an engineer, and served as an engineer for more than five years.

(4) Graduated from a science and engineering college, the main participant of the second prize above the provincial (ministerial) level science and technology award, obtained the qualification of engineer, and served as an engineer for more than five years.

20 17 what are the requirements for the title evaluation of mechanical and electrical engineers?

20 17 the professional title evaluation of mechanical and electrical engineers requires that the academic qualifications meet the requirements, publish high-level papers and works, and publish books to find Zhu Lan culture.