Printing plate making is one of the prepress technological processes. Compared with other processes, the traditional plate-making process has a relatively low degree of automation and many manual processes, mainly relying on the experience of operators. I cleaned it for everyone, okay? Printing and plate-making resume model? Welcome everyone to learn from it.
biographical notes
Basic resume
Name: Nationality: China
Current residence: Guangzhou Nationality: Han nationality
Registered residence: Guangzhou Body: 160 cm 48 kg.
Marital status: unmarried age: 25 years old
Training certification: integrity badge:
working strength
Talent type: general job hunting
Position: Secretary/Clerk: Office Clerk, Documentary
Working years: 5 titles: no titles.
Job type: full-time-available at any time
Monthly salary requirements: 1500-2000 I hope to work in Guangzhou.
Work experience:
Company name: Zengcheng Yaluolan Commodity Co., Ltd. Commencement date: August 2007 ~ April 2008.
Company nature: wholly foreign-owned industry: daily life service
Position: domestic market business documentary
Job Description: Mainly responsible for the delivery arrangement and payment collection in the domestic market, flexibly answering customers' calls, negotiating with customers to place orders, making product inventory statistics and making production arrangements. Store sales, responsible for external quotation, and make preparations before cooperation.
Reasons for leaving: personal reasons
Company name: Guangzhou Linnei Co., Ltd. Commencement date: 2006-10 ~ May 2007.
Company nature: Sino-foreign joint venture industry: others
Position: Front Desk Clerk
Job description: Answer major phone calls, send and receive faxes, print materials, and do a good job in logistics material distribution.
Reason for leaving:
Company name: Guangzhou Huaxin Research Institute Date: August 2002 ~ July 2006.
Company nature: private enterprise industry: daily life service
Position: statistical clerk, document clerk
Job description: 1, engaged in the statistical work of the company's products in and out of the warehouse, and do a good job in production operation.
2. Engaged in the company's pre-sales and after-sales work, responsible for shipment arrangement and payment collection, flexibly answering customers' calls, negotiating orders with customers, and assisting the financial department in sorting out daily payment bills.
Reason for leaving:
academic degree
Graduation school: Guangzhou packaging and printing school
Highest education: graduated from technical secondary school-July 2002 -0 1
Major 1: Printing and Typesetting Major 2: Office Software.
Education and training experience: start and end date, school (institution) special industry certificate number.
1999-09 2002-07 computer office software for printing and typesetting in Guangzhou packaging and printing school
linguistic competence
Foreign language: English is average.
Putonghua level: proficient in Cantonese level: proficient
service ability
After five years of social work, I have learned a lot about production management. I can handle the daily affairs of the office and some administrative and personnel work. I have strong ability to organize, manage and distribute work, and can work under great pressure. I am good at communicating with customers and forming a friendly cooperative relationship. I am an enterprising and approachable person with a kind personality, so I get along well with my colleagues. My resume is wdjl.net, and I am good at discussing with clients. Familiar with computer office software and word/excel.
self-introduction
My favorite motto is: No matter how tortuous the road of life is, I can face difficulties and work hard!
My favorite life creed is: people should not be arrogant, but they should not be impatient. No matter what I used to do, I believe that if I am admitted to your company, I will do my duty for the company and create brilliant achievements!
interlinkage
Printing plate-making process
thin slice
After the film (also known as film) is sent from the phototypesetting workshop to the plate-making workshop, the first thing to do is to cut off the blank part of the film, that is, cut the film. The correct operation method is to put the film face up on the stage, first look at the parity of the version number, if it is an odd code version, cut off the blank part on the left side of the film; If there is a middle seam, try to cut it on the inside to avoid re-processing by the imposition staff; If it is an even size version, cut off the right side of the film. The above is the cutting method of black and white film. If it is a color film, it is generally necessary to leave alignment marks on the top and bottom.
Make up/make up/make up/make up/make up/configure/make up/make up (a bed)
Imposition is divided into book edition and newspaper edition. 8. Generally, the printed version uses the spelling of the book version. Common versions are 4, 8, 16, 24, 32, and occasionally 48, 64. Usually, in imposition, the number of large editions is divided into marked parts, such as A.B.C.D For example, a 64-page newspaper edition can be divided into A32, B32 or 16 editions of A, B, C and D respectively. (1) The regular imposition of newspaper sections follows the following rules: ① The sum of the upper and lower left edition numbers is equal to the sum of the upper and lower right edition numbers, which is equal to the maximum edition number plus 1. As in the case of version 32, the sum of the upper and lower version numbers on the left and right sides should be 33. (2) The positions of the odd-numbered version and the even-numbered version are fixed, and the positions of the left and right small versions and the large version are also fixed. For example, in the process of imposition of the 32nd edition, the four editions of 32, 25, 1 8 and the four editions of 24, 17, 9 and 16 are placed on two large editions respectively, of which the imposition of 32 and 24, (2)4 newspaper editions generally follows the following rules: ① The edition number is less than 20. (2) If the version number is greater than 20, you can subtract the version number by an integer multiple of 20, and then use the method in the first case. For example, 48 can be put together with 45, because 8 and 5 are put together after subtracting two twenties from 48 and 45 respectively. ③ The odd and even versions are fixed. Namely: 1, 3, 5, 7, 9? Use 2,4,6,8, 10? The version is the same.
Put your hands together
Imposition is obtained by folding proofs, and the process of folding proofs is called folding hands. According to the different folding methods of printing equipment and folding machine, the folding methods are also different. For example, version 8 has a head-to-head, foot-to-foot distinction, and version 4 has a head-up and a bow. Generally speaking, for two triangular printing devices or using a folding machine, the folded hands are both two hands, that is, for the 16 version, the first eight bits and the last eight bits are nested; For version 24, put the first 16 together, and then put it together with the last eight small collections; For version 32, cover the front 16 and the back 16 separately, and then cover them together.
Flat combustion
Due to the timeliness of newspaper printing, the plate-making workshop of newspaper printing plant generally advocates? Weak exposure? In order to save the time in the process of plate making, the printing time is set shorter, and the printing conditions are adjusted accordingly to produce a printing plate that meets the printing requirements. In addition, attention should be paid to the cleanliness of printer glass and the suction of vacuum pump when printing.
Stamping (development)
In order to meet the printing conditions of weak exposure, the ratio of developer is generally higher than that in the specification. Taking developer as an example, the specification requires that the ratio of stock solution to water is 1: 5 ~ 1: 8, while? Weak exposure? The general concentration should be 1: 4. After the printing plate is washed out, it is often dirty. There are usually two ways to deal with it. One is to reprint the printing plate, but it takes too much time; Another method, which is also a better method, is to add a certain amount of washing powder to the developer to remove dirt by enhancing the molecular activity of the plate washing solution.
polish
The most important point of revision is to remove unnecessary film edge marks on the printing plate. Traces repaired with a revised pen must also be wiped off with a wet cloth in time to avoid getting dirty when printing. For the scratches on the printing plate, you can dip a little dilute sulfuric acid with a fine brush and apply it to the scratches.
;