Self-evaluation of water supply and drainage engineers (1)
I am xxx, male, xx years old, and graduated from xxXXX University in XX. Since graduation, I have been engaged in technical management and engineering construction of water supply and drainage specialty, constantly learning new technologies and theories, and guiding my work with new management level. After years of practical work and study, we not only have a deeper understanding of the original book knowledge, but also have a deeper understanding of water supply and drainage engineering technology and engineering management theory. Under the careful training and teaching of the project department and the company leaders, through their own continuous efforts, they have made certain progress in their thinking, study and work. Will be summarized as follows:
Ideologically, I insist on studying Marxism-Leninism, Mao Zedong Thought, Deng Xiaoping Theory and Deng Xiaoping Theory? Theory of Three Represents theory? Important thoughts, study hard? Scientific Outlook on Development? Insist on seeking truth from facts, constantly improve their political and ideological awareness and level, and constantly explore and pursue. Establish a correct outlook on life and values and serve the society.
At work, when completing the tasks assigned by the leaders, I can fulfill my own tasks dutifully and conscientiously, and carefully analyze the problems existing in the on-site and internal management, so as to provide the basis for the decision-making of the superior leaders. At the same time, it can help to do a good job in quality and progress, and complete project management wholeheartedly. Handle site changes in time; For completed projects, complete data archiving independently; Able to independently complete the project acceptance of project divisions, disciplines and units, and write supervision reports; Handle all coordination affairs on the supervision project site in time. I am honest and self-disciplined in my work, and I never want to take cards, cheat in personal affairs, and take bribes and bend the law. I am more responsible to the employees of the unit and ask them to do it. I'll do it myself first. In all kinds of expenses, we also pay attention to thrift and never waste money. At work, no matter in which position or multiple positions, do a good job.
I like love, work pragmatically, study business knowledge hard, constantly sum up management experience, learn advanced management methods, and constantly improve my business ability and management level, so that I can be competent for various positions and positions. In order to adapt to the development of the times and update my knowledge, I participated in various forms of study in my spare time, so that my management level and business ability were constantly matured and improved.
During his tenure, he mainly organized the acceptance of concealed works, inspection lots and sub-projects of water supply and drainage and fire protection works, participated in the debugging of fire protection systems and air conditioning systems, cooperated with the division acceptance of water supply and drainage and heating works, fire protection works and ventilation and air conditioning works organized by the director, and presided over the completion acceptance.
For the new norms and standards of water supply and drainage industry, every time they are introduced, I will buy them and study them carefully, master them and apply them to the practice of engineering construction, and constantly sum up experiences and lessons. During the construction of each project, I carefully recorded the project from the aspects of technical management and site management, and compiled it into a book. I often analyze the research records and summarize what valuable experience I have gained through the practice of project management, what problems still exist in the project construction, what aspects are worth improving and what aspects are worth continuing to carry forward.
The specific job responsibilities are as follows: 1. Responsible for the quality and schedule control and management of on-site water supply and drainage works;
2, review the technical part of water supply and drainage engineering bidding documents;
3. Participate in the construction drawing review and investment control optimization of water supply and drainage specialty;
4, participate in solving major technical problems in the construction of water supply and drainage specialty, and implement quality supervision;
5, do a good job of sorting out the relevant technical data of this major;
6. Participate in the bidding of water supply and drainage engineering equipment.
In recent years, we insist on learning professional theoretical basis and professional knowledge in practical work, systematically study the ISO9000 series standard system in engineering quality management, and further study and study the development trend of domestic water supply and drainage engineering management. Especially, building fire water supply is paid more and more attention by water supply and drainage technicians. Participate in continuing education for more than 72 hours every year, and improve the familiarity with the technical specifications, regulations and laws and regulations of this major or related majors to varying degrees. We should study hard in the future and constantly improve our ability to coordinate various professional and technical problems.
After years of work practice, I have grown into a mature water supply and drainage worker. Although I have done some work and made some achievements, there is still a certain gap between the requirements of my superiors and the hopes of my comrades. In the future work, I will study harder, continue to carry out research and discussion in the field of water supply and drainage, improve my comprehensive quality, meet the needs of reform, and make my own contribution to the prosperity of water supply and drainage.
Self-evaluation of water supply and drainage engineers (2)
Since the XXXXXXXXXX project undertaken by our company started on April 18, 2065438, it has successfully completed the phased construction tasks of building water supply and drainage sub-projects and has met the acceptance conditions.
I. Overview of the Project
Project name: XXXXXXXX
Construction unit: XXXXXX
Design unit: XXXXXX
Supervision unit: XXXXXX
Construction unit: XXXXX
Project location: XXXXXX
Building area: 8723 square meters
Bid price in civil engineering: 1.506, 1.825 million yuan.
Structural level: frame structure, two floors, local three floors.
Project objective: to create a high-quality structural project and civilized construction site in Xuzhou.
Second, the acceptance and construction standard basis
Strictly implement GB/T72 19- 1998 Hygienic Standard for Drinking Water, Code for Design of Water Supply and Drainage in Buildings (GB500 15-2003)(2009 edition) and Code for Design of Outdoor Water Supply (GB 500/KLOC-). GB50242-2002 Code for Acceptance of Construction Quality of Building Water Supply, Drainage and Heating Engineering, CJJ/T29-98 Technical Code for Building Water Supply and Drainage Rigid PVC Pipeline Engineering, DB08-42095 Technical Code for Building Rainwater Drainage Rigid PVC Pipeline Engineering, etc.
At present, safety in production, civilized construction, environmental protection and fire fighting in China are related.
Regulations, as well as Xuzhou construction site safety standards management standards.
Three. Overview of water supply and drainage engineering
This project is a basketball training hall, and the design contents are: the construction design of indoor water supply and drainage and fire hydrant water supply system.
(1). feed water system
1. The maximum hourly domestic water consumption of this project is: 3.09m? /h, the maximum daily domestic water consumption is: 20.6m? /h .
2. The water supply system of this project is vertically partitioned, and the water supply mode is from bottom to top, and the municipal water supply pipe network directly supplies water (the water pressure is 0.25Mpa).
(2) Domestic drainage system
1. The maximum hourly domestic displacement of this project is: 2.63m? /h, and the maximum daily displacement in China is: 17.5m? /h .
2. The drainage system of this project is sewage and wastewater combined drainage system, and the sewage is discharged into the regional sewage pipe network after being treated by septic tank.
The first floor of this building is in the form of single row.
3. The rainwater drainage system of this project adopts external drainage system. See the construction drawing for the location and specifications of rainwater pipes.
(3). Sanitary ware
The choice of sanitary ware is further determined during decoration, in which the washbasin adopts induction mixing faucet, the squatting pan adopts self-closing flushing squatting pan, the urinal adopts self-closing flushing valve, and other sanitary ware and hardware fittings adopt water-saving products designated by the Ministry of Construction.
(4). Pipes and interfaces:
1. Domestic water supply pipe adopts PPR plastic pipe for hot melt connection. .
2. The sewage pipe adopts UPVC pipe, which is socket-bonded.
3. Rainwater pipes adopt pressure-bearing UPVC pipes, which are socket-bonded;
4. The fire hydrant water supply pipe is connected by hot dip galvanized steel pipe thread.
(5) The pipes used shall meet the following requirements:
1. Pipes and fittings shall be matched and meet the requirements of current product standards and hygiene standards. The materials involved in the domestic water supply system must meet the hygienic standards for drinking water.
2. The working pressure of the system should not be greater than the working pressure under the corresponding medium temperature specified in the product standard.
(6). Pipeline laying:
(a) When all kinds of pipes pass through walls and floors, metal sleeves shall be set. The inner diameter of the casing should be larger than the outer diameter of the pipeline 10mm, the top of the casing installed in the floor should be 20mm higher than the decorative floor, and the top of the casing installed in the toilet should be 50mm higher than the decorative floor, and the bottom should be flush with the bottom of the floor; Both ends of the sleeve installed in the wall are flush with the finish. The gap between the casing and the pipeline passing through the floor shall be filled with flame-retardant dense materials and waterproof ointment, and the end face shall be smooth. The gap between the wall bushing and the pipeline should be filled with flame retardant dense material, and the end face should be smooth. The interface of the pipeline should not be set in the casing. When the plastic pipe passes through the floor, it is necessary to install a fire ring.
(2) When the pipeline passes through the beam or reinforced concrete wall, the casing shall be embedded.
(7). Pipeline pressure test:
After the pipeline installation is completed, the strength and leak test of the pipeline system should be carried out according to the design regulations to check the engineering quality of the pipeline system and the connecting parts.
The pressure test of pipeline shall be carried out according to Code for Acceptance of Construction Quality of Building Water Supply, Drainage and Heating Engineering (GB50242-2002).
Indoor rainwater pipes should be tested for water closure. The water injection height should be from the horizontal drainage pipe to the top rainwater hopper, and it is qualified if it is impervious within 1 hour.
(8). Anti-corrosion and painting:
(1) Dust and dirt on the pipe surface must be removed before priming.
Rust, welding slag, etc. Brush paint evenly, without peeling, foaming, flowing and missing coating.
(9). Pipe flushing:
(a) the water supply pipeline must be washed and disinfected before the operation of the system, and can only be used after sampling inspection by the relevant departments and providing test reports that meet the standards of drinking water.
(2) Rainwater pipes and drainage pipes shall be washed by qualified bare pipes.
Four, the construction unit quality control status:
In the process of construction, the construction personnel of the project department strictly follow the quality inspection and evaluation standards of construction projects, construction acceptance specifications, current national and regional standards, technical standards, procedures, specifications and quality control objectives agreed in the construction contract, and take the design documents as the basis.
(1) Prior control of engineering quality
Seriously organize the construction drawing design disclosure and joint review with the participation of the construction unit, design unit, construction unit, supervision unit and relevant units; Prepare supervision rules and supervision plans; The supervisor carefully examined the qualification and construction scheme of the construction unit; All materials used on site shall be rechecked according to regulations after being sampled by the supervision witness; Each working procedure shall be inspected after passing the self-inspection by the construction unit, and the construction of the next working procedure shall be carried out after careful inspection by the supervisor.
(2) Engineering quality control
In the process of construction, each working procedure shall be submitted for inspection after the construction unit has passed the self-inspection, and the construction of the next working procedure can only be carried out after careful inspection by the supervision engineer. The construction process is an important link to form the quality of the project, and it is also the key point for the construction unit to control the quality. It must be highly valued and strictly controlled. A construction unit with the project manager as the main person in charge was established, and the construction personnel performed their respective duties, and each working procedure was strictly controlled to ensure the construction quality. Established a weekly meeting system, on duty.
Tracking system, material inspection and witness sampling system, key working procedure station system, etc. , and timely feedback the construction quality.
(3) Post-event control of project quality
After each working procedure is completed, inspection and acceptance shall be conducted according to relevant standards and acceptance specifications; Some materials used in the field must be inspected according to the requirements of the specification before they can enter the site.
(4) Testing of materials and entities used:
All pipelines shall be provided with inspection reports and certificates as required, and all inspection reports are qualified and meet the design, specification and contract requirements.
All major control items meet the design requirements; General items are within the allowable deviation range of specifications.
Quality assurance information is as follows:
4 copies of PP-R pipe inspection report and certificate of water supply pipeline, which are qualified; 3 copies of inspection report and certificate of quality of PVC-U pipes for drainage pipes, which are qualified; Washball inspection report and certificate 1 copy, qualified; 2 copies of single temperature control faucet certificate, qualified; 2 copies of inspection report and certificate of hydraulic slow-closing flushing valve, which are qualified; 2 copies of inspection report and certificate of safety relief valve, which are qualified; Four inspection reports and certificates of electrical control cabinet in water pump room are qualified. Four copies of inspection report and certificate of stainless steel water tank are qualified.
1 The concealed record of water supply pipeline installation is qualified; Drainage pipe installation two hidden records qualified; The three experimental records of indoor pipeline strength and tightness are qualified; 1 1 Indoor drainage pipe irrigation test record is qualified; 2 copies of indoor drainage pipeline water test records are qualified; The test record of system cleaning, flushing, water supply and ball passing is 20 points, which is qualified; 4 copies of quality acceptance records of inspection lot for indoor water supply pipeline and fittings installation project; 2 copies of quality acceptance records of inspection lot for indoor drainage pipeline and fittings installation project; Sanitary Ware and Water Supply Fittings Installation Inspection Lot Quality Acceptance Record
2 copies of quality acceptance records of engineering inspection lot; 2 copies of quality acceptance records of the installation inspection lot of basin appliances and water supply accessories; 2 copies of quality acceptance records of the inspection lot for drainage pipeline installation of basin appliances; 2 copies of quality acceptance records of the inspection lot for basin appliance installation project.
Verb (short for verb) self-evaluation:
To sum up, the water supply and drainage engineering quality of Peixian No.2 Middle School Gymnasium meets the design, specification and contract requirements, and the quality is qualified, and the self-evaluation is qualified.
Self-evaluation of water supply and drainage engineers (3)
Ideologically, I always aim at improving comprehensive quality, take all-round development as the direction of struggle, and strive to improve moral cultivation. By studying Marxism-Leninism, Mao Zedong Thought, Deng Xiaoping Theory and? Theory of Three Represents theory? By studying important thoughts, I became a contemporary college student with correct thoughts and self-motivation, and learned to arm my mind with advanced theories. In daily life, love the motherland, abide by the law, respect teachers and unite classmates; Pay attention to the current situation of the country. And start from bit by bit, cultivate the belief of serving students and everyone, and establish a correct outlook on life and values.
Self-cultivation needs wisdom first! In study, I love the major of environmental engineering. In my study, I have a correct attitude, clear goals and mastered relevant knowledge and skills. At the same time, I also strive to cultivate my ability to think and deal with problems independently and practical ability. In addition to regular courses, I also learned computer and other professional knowledge through elective courses and extracurricular reading, perfecting and expanding my knowledge structure. As a student, I pay attention to social practice while studying. Combined with the annual summer social practice opportunities, I gradually improved my learning ability and practical ability, as well as coordination, organization and management ability.
At work, I used to be the head of the International Liaison Department of the Student Union at school. I am proactive, hard-working, hard-working, with a strong sense of responsibility, and have good organizational and communication skills and teamwork spirit. After going to school, I have participated in volunteer work organized by all walks of life many times. During this period, I actively serve others with a warm heart and enjoy it. In life, I am helpful, honest and trustworthy, approachable and friendly, so I always get along well with teachers and classmates. With the care and help of my classmates and teachers, I have developed good living habits. My life is full and organized, and my living habits and style are rigorous. On weekdays, I also pay attention to cultivating my hobbies and apply what I have learned. The work of tennis coach has given me a good physical and mental exercise and edification.
Meet new challenges and climb new heights with full enthusiasm, firm belief and high sense of responsibility!
With a dream, I entered the university. During my college study, I learned my major well, expanded my knowledge and strengthened the principle of ability training. I learned a lot of knowledge and wealth, and exercised my various abilities. I study hard in basic courses, deepen my professional knowledge and get excellent grades. He has been among the best for many times and won scholarships every year.
During my study at school, I loved socialism and supported China and his leadership. Consciously abide by national laws and school discipline. Actively participate in all kinds of party school activities of the school, get close to the party organization, and obtain the certificate of completion of the party school. At school, I actively participate in various collective activities from classes to departments and schools, and make suggestions for the collective. Always care about your classmates and get along well with everyone. As a class cadre, I strive to serve my classmates, actively assist teachers in their work, carry out various activities, and coordinate the relationship between classmates and the collective, so that our class can become a class collective full of vitality.
In my after-school life, I also insist on cultivating my extensive hobbies and physical exercise to keep myself in the best condition. In order to improve my social communication and ability to use all kinds of knowledge, I actively participate in social practice. In the past three years, I have joined young volunteers and participated in the training of the school party school. These experiences not only enhanced my ability to bear hardships and stand on my own feet, but also improved my ability to cooperate and communicate with others.
The world is vast, and I know that apart from my theoretical knowledge, my experience is superficial. Read thousands of books, take Wan Li Road, and I will continue to improve in my future practical work and study! I firmly believe that opportunities will favor those who are prepared. I look forward to a bright future and am always ready!
?
Articles on self-evaluation of water supply and drainage engineers;
1. Three templates of water supply and drainage resume.
2.it engineer resume self-assessment
3. Self-evaluation of engineers
4. Examples of engineers' self-evaluation
5. Self-evaluation of 5.it engineers