Question 2: How the die-cutting industry develops rapidly and the competition is fierce!
The main reason is that the scale of American manufacturers is relatively large, and there is a certain gap between local enterprises in technology and equipment strength, but it is only temporary!
The flow of a large number of employees has promoted the development of this industry, and a large number of local companies with annual turnover exceeding 100 million have emerged, mainly in materials, technology and market!
Question 3: Does the die-cutting industry have a future? It is recommended to study popular occupations, such as West Point and Chef.
Question 4: What environmental pollution will die-cutting industry produce? Industrial pollution refers to the environmental pollution caused by waste gas, waste water and solid emissions formed in the industrial production process. Pollution is mainly caused by "three wastes" (waste water, waste gas and waste residue) and various noises in production, which can be divided into waste water pollution, waste gas pollution, waste residue pollution and noise pollution.
The prevention and control of industrial pollution is the focus of environmental protection in China. Compared with the past, China's industrial pollution prevention and control strategy is undergoing major changes, from terminal control to source and whole process control, from concentration control to the combination of total amount and concentration control, from point source control to comprehensive management of river basins and regions, from simple corporate governance to industrial structure adjustment, cleaner production and development of circular economy. Compared with 1995, the emissions of industrial wastewater, industrial chemical oxygen demand, industrial sulfur dioxide, industrial soot and industrial dust per unit of GDP in 2004 decreased by 58%, 72%, 42%, 55% and 39% respectively. Compared with 1990, the energy consumption per 10,000 yuan of GDP in 2004 decreased by 45%, and 700 million tons of standard coal were saved and used. Coal consumption of thermal power supply, comparable energy consumption per ton of steel and comprehensive energy consumption of cement decreased by 1 1.2%, 29.6% and 2 1.9% respectively.
-eliminate and close a number of enterprises with backward technology, serious pollution and waste of resources. During the Ninth Five-Year Plan (1996-2000), the state closed 84,000 small enterprises that seriously wasted resources and polluted the environment. From 200/kloc-0 to 2004, the catalogue of eliminating backward production capacity, technology and products was issued three times in a row, and more than 30 thousand enterprises that wasted resources and caused serious pollution were eliminated. Eight heavily polluted industries, such as steel, cement, electrolytic aluminum, ferroalloy, calcium carbide, coking, saponin and chromium salt, were intensively rectified, and 65,438 projects were suspended. In 2005, more than 2,600 enterprises such as steel, cement, ferroalloy, coking, paper-making, textile printing and dyeing were shut down, and the heavily polluted industries such as cement, electric power, steel, paper-making and chemical industry were actively treated and technically reformed, so that the emission intensity of major pollutants in these industries showed a continuous downward trend while the output increased year by year. Aware cat can test itself at home, without drawing blood, which is simple and convenient with an accuracy rate of 99.9%.
-Carry out the practice of circular economy. First, implement cleaner production, make full use of resources at the source and in the whole production process of enterprises, minimize waste, recycling and harmlessness, gradually establish an extended producer responsibility system, and promote product ecological design. At present, more than 5,000 enterprises in chemical industry, light industry, electric power, coal, machinery, building materials and other industries have passed the cleaner production audit. More than 12000 enterprises in China have obtained ISO 65 438+04000 environmental management system certification, and more than 800 enterprises and 18000 products have obtained environmental label certification, with an annual output value of about 60 billion yuan. Second, actively develop eco-industries in areas where industries are concentrated, so that the wastes of upstream enterprises can become the raw materials of downstream enterprises, extend the production chain, minimize the amount of waste generated, realize "zero emission", build eco-industrial zones, and realize the most effective use of resources of regions or enterprise groups. At present, China has established 17 different types of eco-industrial parks. Third, coordinate the development of industry and agriculture, production and consumption, urban and rural areas, vigorously develop resources recycling industries, and implement sustainable production and consumption. The state selected 82 units in key industries, key fields, industrial parks and relevant provinces and cities to carry out the first batch of circular economy pilot work. In 24 cities, such as Beijing and Shanghai, pilot projects for the construction of renewable resources recovery systems were carried out. Hainan, Jilin, Heilongjiang and other nine provinces have actively carried out the construction of ecological provinces, and 150 counties and cities have established ecological counties (cities) throughout the country.
Question 5: How does the business of die-cutting industry run? If you have a good relationship with the tape manufacturers in the die-cutting industry, you can ask them to recommend several, or you can find some secondary suppliers in the automobile factory to run.
Question 6: How to write the work summary of quotation personnel in die-cutting industry? 1. Overview of work and completion of work objectives.
Second, work attitude, work discipline and so on.
Third, shortcomings, the direction of efforts
Question 7: How to control the materials in the die-cutting industry? Starting from the production management planning course, second, the control in the cutting process, and third, die cutting. What kind of products should be charged according to the defective rate? For the surplus materials produced by the machine with a tail length of more than ten or twenty meters, the machine should indicate it on the production list, and someone should check the actual materials and input them into the computer. Tailings should be deducted first at the next billing. In this cycle.
Question 8: Do people who die-cut mobile phones talk about the future of this industry? That's a good question Think about the explosion of the mobile phone industry five years ago. The number of mobile phone users in China is doubling every month, and many of them are exported to India and the Philippines. In the past, there were many knockoffs, and brand machines had fewer functions because of their higher prices. But it's different now. Mobile phones are basically full in China. Even a big company like Huawei has made mobile phones, and it has been * * * by foreign countries. There is no place for knockoffs.
Question 9: What is the difference between cutting and die-cutting in printing and packaging industry? In the calculation, we need to know which die cutting is the cutting process of post-processing of printed matter, and die cutting is a little more complicated than cutting.
(Print the URL here)