1, the ship unloader driver should carefully understand the safety precautions and related work arrangements for special hatch operations such as oil tanks put forward by the coal unloading team leader at the pre-shift meeting.
2. Before the operation, you must get in touch with the commander or driver of the harrow pusher, and make clear the stop position of the harrow pusher. Especially after the clearance personnel disembark, you must confirm that the clearance personnel can retreat to the designated safety zone before you can carry out the operation.
3. It is forbidden to grab coal samples and lift the articles on board with grab bucket.
4, cart walking, pay attention to observe whether there are people or other items on both sides of the cart track. If there is a mast between the two cabins, pay attention to the height of the mast and whether it will collide with the cab. When moving the cart before the bridge of the ship, pay attention to the height of the bridge and the height of the observation deck on the ship, whether there is a possibility of collision between the bridge and the cab, and whether there is a possibility of collision between the observation deck and the receiving plate.
5. The driver should know the cabin situation, the position of stairs, the position of fuel tank and whether there are any special devices before catching coal on the computer.
6. When harrowing the crane, the harrowing crane personnel should be urged to carefully check whether the spreader of the harrowing crane is safe and reliable. Check whether the grab ear is normal, and there can be no cracks, deformation and desoldering.
7. When lifting the rake, you should obey the command of the ground commander.
8. When lifting the rake, try to lift it. When the grab bucket rises to 0.5- 1m, the ground personnel should check whether the wire rope is normal and whether the shackle is locked. The driver of the ship unloader should check whether the brake is safe and reliable. When it rises to 1.2m, the driver should check whether the brakes are reliable again.
9, hang rake cart walking, the car must stop at the top of the hopper.
10, when the scraper is close to the ground (bilge), it should be carried out at low speed.
1 1. The cleaner driver should be urged to fasten his seat belt when disembarking. Check whether the stairs in the cabin are in good condition, and whether there are any phenomena such as desoldering and corrosion. If it is not good, it will not pass.
12. When clearing the warehouse, wait for the scraper to stop at the corner before grabbing coal. After grabbing the half warehouse, contact the harrow owner to stop at the corner where the half warehouse has been grabbed, and then grab the half warehouse.