Business training requirements: students majoring in this major mainly study the engineering technology foundation and certain professional knowledge in a wide range of fields, such as electrical technology, electronic technology, automatic control theory, information processing, computer technology and application. Students have received basic training in electrical and electronic engineering, information control, computer technology, etc., and have the ability to control and analyze industrial processes and solve wide-caliber professional and technical problems with equal emphasis on strong electricity and weak electricity.
Main course:
Main subjects: electrical engineering, control science and engineering, computer science and technology?
Main courses: circuit principle, electronic technology foundation, computer principle and application, computer software foundation, control theory, motor and drive, power electronic technology, signal analysis and processing, electric drive control system, industrial process control and automation instrument, etc. Senior students can set flexible modules and elective courses in their major direction according to social needs. ?
Main practical teaching links: including basic experiment of circuit and electronics, electronic technology practice, metalworking practice, professional comprehensive experiment, computer practice, curriculum design, production practice and graduation design. ?
Main experiments: motion control experiment, automatic control experiment, computer control experiment, test instrument experiment, power electronics experiment, etc.
Question 2: How to fill in the research direction of the paper? It's a little bigger than my own research direction. For example, functional materials and devices can be written in dielectric materials, and new energy materials and devices can be written in the direction of new solar cells or lithium batteries, so it will definitely look full of momentum after amplification ~
Question 3: What is the direction for the postgraduate entrance examination of electrical specialty? Electrical specialty generally has the following directions: power system and power electronics. Motor, system integration, electrical theory. Power system and power electronics facilitate employment. Of course, the premise is that schools with good rankings have good prospects. If the power system is recognized by some schools in the power grid system, it will enter the power grid company, power design institute, high voltage institute and so on. In the future, you can also enter electric power equipment enterprises such as Nanrui and Sifang. If power electronics has nothing to do with it, they are not graduates of Electric Four Tigers, and generally work in some enterprises, such as Shenzhen Emerson, Delta, Guangbao, FSP, Hangzhou MPS, Silijie, Hefu Sunshine Power, etc., as well as some in Nanjing, such as Bolan, and of course Huawei and ZTE. Wages generally vary from city to city. Generally speaking, the power system is going downhill, the industry is separated, and the wages of the power grid are greatly reduced. Power electronics belongs to technical jobs, and the older the qualifications, the more valuable they are. Graduate students will receive a bonus of 654.38 million yuan. Motors generally enter some enterprises, and the details are not clear. Electrical theory and system integration can do theoretical research, software development and the like, and it is not bad to stay in school as a teacher.
If you take the postgraduate entrance examination, it depends on your personal hobbies.
Question 4: There are two disciplines under electrical engineering and automation called power electronics. What does this subject mainly study and write? I got 70 points in electrical engineering and automation. I am familiar with this problem. Electrical engineering in Zhejiang University plays a very important role in China. I studied a first-class subject in the undergraduate stage, and there is no subdivision direction, which has little influence on the direction of postgraduate entrance examination. Most of them are teaching differences. It is more scientific to make a school evaluation, but the impact is still a bit. These two majors are the two most popular subjects in electrical engineering. Don't worry about work. Electrical automation (power system automation) and electrical control (motor control) in electrical engineering are both high-voltage majors (the most important professional basic courses in circuit period), and power system automation is stronger. The research directions of the two are mostly the same, but there are differences as two different directions. Power system automation focuses on the control, operation and analysis of power system in electrical engineering specialty. Emphasis is placed on undergraduate courses such as power system analysis and control principles. Power system automation is a major in postgraduate professional stage. Electric control (motor control) is of course related to the motor. The main courses related to the undergraduate course are electronic technology, electromechanical (or motor and drive foundation) and control principle. The major directly related to graduate students is power electronics and electric drive (electronic device control motor, weak current), which is the hot spot and development direction in the future.
Question 5: How do electrical graduate students write high-level papers? The research direction of the tutor is relatively cutting-edge, and the research group is strong, working 10 hours or more every day.
Question 6: Which direction is better for electrical engineering postgraduate entrance examination? The power industry is undoubtedly one of the most powerful industries. At present, the best job in the power industry is electrical engineering and its automation specialty. Wide-caliber "application-oriented" senior engineering and technical personnel engaged in electrical engineering-related system operation, automatic control, power electronics technology, information processing, research and development of electronic and computer technology, economic management and application are in short supply in the talent market.
Question 7: Familiar with your major, what is your major, electrical engineering and its automation, and how to fill in the single chip microcomputer of PLC power supply and distribution system.
Question 8: Which of the five directions of electrical automation postgraduate entrance examination is better? Boys. First of all, it depends on your personal interests, and liking is the most important. If you can decide where to develop in the future, it won't be a problem. In addition, at present, power system and its automation are the hottest. The ideal job for this is to go to the power grid, such as the electric power bureau. These units are idle, and their wages are very high, but sometimes they need contacts. Secondly, power electronics and power transmission have a wider range of employment, and industrial enterprises use them more to exercise their abilities. Motor and electrical, high voltage and insulation technology are also needed by general power plants or enterprises, and belong to general majors in general industries, but their competitiveness in postgraduate entrance examination will be small. Electrical theory and new technology should be biased towards theory, and it is suggested to consider the first four.
If you have a background and can enter the power grid, you can apply for the power system and its automation, otherwise you can choose one of the two, power electronics and motors, and it is no problem to support your family.
Finally, attach the precautions for your postgraduate entrance examination. Good luck.
What should be paid attention to in electrical engineering and its automation postgraduate entrance examination?
1. Contact the school, determine the specific school and major, and obtain specific examination information.
If you decide to take the postgraduate entrance examination and determine the general school and professional scope, you should contact the school to get the latest enrollment information and keep abreast of the latest school trends. So as not to shoot indiscriminately.
Prepare in advance
After getting enough professional course information and finding complete review materials, it's time to read and review. Since I chose the distance, I only care about hardships. Once you have set your goals, you should throw yourself into the review without hesitation. In the review, we must be down-to-earth and take it seriously.
register
The registration time is usually 1 1 month, and in recent years it is 10- 14. When students register, they are registered by the school. On-the-job personnel are generally enrolled in schools that are recruited or registered by the Municipal Education Commission. You can also register in different places, that is, because of business trips and other reasons, you can register in other places to take the exam.
When applying for registration, you can fill in the first choice and the second choice. The examination questions of specialized courses in postgraduate examination are the propositions of all enrollment units, and candidates should take the examination according to the first choice questions.
4. Initial test
The initial test is usually 1 and 1 and 2 weeks before the Spring Festival in February. The exam lasts for 2 days and consists of 4 exams, each lasting 3 hours. The examination place is generally in the examination center set up by the Higher Education Office of the Municipal Education Commission, or in the colleges and universities that enroll students. Candidates can choose these two test sites when registering.
adjust
About two weeks after the winter vacation, 1 and the start of school in spring, the results of professional courses almost came out. At this time, you can call the department and the admissions office to ask. In 1 and 2 weeks, the results of public courses will also come out. It is very important to send a second interview notice later. If the ranking is not particularly ideal and the admission is ambiguous, it is necessary to contact the applicant (department) and tutor more. If it is really not possible, it depends on whether it is possible to study entrusted training at your own expense or transfer to another school.
6. Second interview
The second interview is generally around 5. 1. It used to be an equal interview, but now it's basically changed to a different interview. Every year, some candidates fail in the second interview, so the competition is very cruel. This requires candidates to carefully prepare for the interview and have a confident and calm attitude in the interview, so as to answer the questions raised by the teacher decisively and smoothly.
7. Admission
After the second interview, the school will send a letter to the unit where your file is located and transfer your file to the school. After checking that there are no major problems (mainly political problems), send an admission notice and transfer all your relationships, including organization, household registration and salary relations, to the school.
Question 9: What do graduate students majoring in electrical engineering and automation study? Courses include advanced mathematics (1), general physics (1) and experiments, circuit principle, electronic technology foundation, automatic control theory, computer principle and application, power electronic technology, motor principle and motor drive, and computer control system.
If you are engaged in this major, the main outlets are power supply companies, power plants and research institutes of major enterprises under the State Grid, but if you want to enter real estate companies, you should take the road of building electricity, and the third is to take the direction of power electronics.
I hope I can help you.
Question 10: Resume: What is your main research direction? Japanese language and literature.