1, determine the size of the water-based paint mixing workbench pad according to the work needs. Thoroughly clean the lower and upper surfaces of the table mat and all parts with alcohol;
2. Spread aluminum foil tape on the lower surface of the water-based paint mixing workbench pad, and the aluminum foil is only allowed to overlap at the fold. Press down the knob joint from the front of the table pad of the water-based paint mixing workbench, and it can be replaced by other nuts, so that it can pass through the table pad and foil tape to ensure good electrical contact;
3. Spread the prepared water-based paint mixing workbench pad on the workbench plane. According to the operator's activity range, the area of laying water-based paint on the floor mat of the paint mixing workbench is determined. Place the workbench on the floor mat of the water-based paint mixing workbench;
4. The water-based paint mixing workbench is grounded, and the platform pad and floor pad of the water-based paint mixing workbench are respectively connected in series with1mΩ resistors to the ground wire configuration system of stranded copper-core flexible wires or cables with a cross-sectional area of not less than 2m. After installation, it is best to check it before use.