Current location - Education and Training Encyclopedia - Resume - Waterproof coating spraying machine Introduction of Waterproof coating spraying machine knowledge encyclopedia
Waterproof coating spraying machine Introduction of Waterproof coating spraying machine knowledge encyclopedia
On the one hand, mechanized operation saves the cost of human resources, on the other hand, it improves work efficiency. The use of a large number of machinery in engineering construction has further improved the scale and quality of our project. Waterproof spraying machine is a kind of machinery used for waterproof construction. So, what is the working principle of waterproof paint spraying machine? Next, I'll give you an introduction about waterproof spray painting machine. Let's have a look.

Introduction of Waterproof Coating Spraying Machine

1. Waterproof spray painting machine is the result of repeated research and tackling key problems by scientific researchers, and applied for appearance patent and new utility patent. The appearance of Isht is a revolution of waterproof building. The simplest one is composed of air compressor, gas storage tank, mixer, slurry extrusion pump and spray gun. Through the combination of pneumatic and mechanical transmission, fast and good spraying effect is realized.

2. The machine is simple to operate and convenient to use, which can effectively reduce the heavy physical strength and labor intensity of construction workers and greatly improve work efficiency. It is difficult to construct on the surface of walls, roofs and other buildings, which can effectively avoid the phenomenon of paint dripping during normal construction. It can effectively keep the construction site clean and tidy, save materials and reflect the convenience of application. Unique function. It has a wide range of applications. It can not only spray waterproof coatings such as cement-based osmotic crystallization, one-component, two-component polyurethane and JS, but also spray fluids, slurry and other synthetic liquid non-rapid solidification slurry.

Second, the principle of waterproof coating spraying machine

1. Waterproof paint sprayer includes air compressor, air storage tank, pulverizer, slurry extrusion pump and spray gun device. The machine realizes spraying effect by combining pneumatic and mechanical transmission.

2. It is characterized in that a stirring rod is arranged below the stirrer, a pulp squeezing pump is arranged at the bottom of the hopper, and a quick connector and a spray gun are arranged at the discharge port of the pulp squeezing pump. The device is installed on the connected pipe head, and there is a pneumatic valve at the top of the spray gun. The air outlet of the air storage tank is directly connected with the air pressure valve on the spray gun through the air pipe. The air inlet channel and the exhaust channel are respectively arranged on the exhaust chamber of the piston spray gun device.

3. The specific operation is as follows: Pour the preset paint into the hopper. Due to the air pressure valve on the spray gun, the paint is squeezed by the agitator and sent to the throat through the driver of the pulp squeezing pump to reach the position of the spray gun. At the same time, the high-pressure gas is also connected together, and the waterproof coating of the throat is sent to the gun head under the action of high-pressure air and sprayed on the waterproof working face of the building at high speed.

Three, waterproof coating spraying machine use matters needing attention

Precautions for operation

1. Before use, confirm that the field AC voltage is 220V single-phase power supply. Do not connect the 380V power supply, or the motor will burn out.

2. The external power cord needs 3 cores, and 4 -6 square meters have sockets, otherwise it will affect the normal start of the air compressor.

3. The oil content of air compressor oil must be checked before each use, at least half of the height of oil level window. It is recommended to use 32# oil.

4. Don't touch your fingers, palms or any part of your body when spraying.

Never point the gun at yourself or others.

6. Please make sure that there is no air pressure in the air storage tank before any maintenance or servicing of the equipment.

7. Do not use solvents such as strong acid and alkali when cleaning, so as not to reduce the service life of the throat and the squeezing pump.

Matters needing attention in construction

1. Please work in a well-ventilated and well-lit place.

2. Don't build where there are sparks and combustibles.

3. The speed of extruder should not be too fast, and the hopper must be able to work with water.

4. If the nozzle is blocked, the reversal time should not exceed 3 seconds. Please turn the stop gear immediately and run normally.

5. Smoking is strictly prohibited when spraying.

6. The leakage protector shall not be dismantled by itself after tripping. You need to find the reason and send it.

The above is the introduction of the waterproof paint spraying machine we brought to you.