In today's social life, meeting minutes are more and more widely used in life, which requires clear meeting procedures, clear objectives, prominent centers, accurate generalization, clear levels and concise language. So how is the relevant meeting minutes made? The following is a sample essay (generally 5 articles) of the minutes of the trade union activity meeting that I compiled for you. Welcome to read the collection.
Minutes of Trade Union Activity Meeting1XX 65438+1On the afternoon of October 28th, Deputy Director Song Qiang presided over the work conference on prevention of serious accidents in construction in the first quarter of this year. Deputy director of the municipal and district construction bureau in charge of safety and the stationmaster of construction management supervision; Stationmaster of quality and safety supervision station of municipal construction project; The main persons in charge of the Municipal Cost Station and the Secretariat of the Construction Industry Association attended the meeting. Relevant leaders of the Municipal Safety Supervision Bureau were invited to attend the meeting. The summary is as follows:
First, the meeting conveyed the spirit of the work conference on preventing serious accidents in the construction field of the whole province in the first quarter of XX.
In XX years, the situation of construction safety production in the whole province was generally stable, mainly manifested as "two year-on-year declines":
First, the number of accidents and deaths was basically the same year-on-year, with a slight decline.
Second, the number of construction accidents and casualties in most areas decreased year-on-year. However, the death toll of construction accidents in our province still ranks among the top three in all provinces and cities in China, and the situation of safe production is still grim.
Two, the meeting requested that all localities should pay close attention to the following six aspects of work:
1, and work out the safety work plan for XX. All localities should take the initiative to find ways to do a good job in advance, strive for early planning and early preparation, and ensure that the city's construction safety production will continue to maintain overall stability this year.
2, ready to meet the safety production supervision responsibility assessment. This year, the Provincial Department of Construction will assess the safety production supervision responsibilities of construction administrative departments at all levels and construction safety supervision institutions. All localities can organize their own pre-examination, strengthen the construction of supervision team, improve relevant management systems, and at the same time take the initiative to communicate with higher authorities for guidance.
3. Continue to implement the "Safe Card" system. At present, the holding rate of "Ping An Card" for construction workers in our city is about 40%. First, it is necessary to improve the holding rate of "safe card" for construction workers in our city, and second, it is necessary to manage "safe card" humanely.
4. It is necessary to further strengthen the implementation of dynamic management measures for construction safety in Guangdong Provincial Construction Department. All localities should earnestly strengthen supervision and inspection, and resolutely deduct points from illegal enterprises and individuals.
5, continue to implement the safety production license system, strengthen the sense of responsibility of construction units, supervision units and related personnel.
6. Strengthen the safety technical management of construction projects, and improve the inspection of construction organization design and implementation of special schemes.
3. The meeting stressed that all localities should earnestly do a good job in construction safety production this winter and next spring, make careful arrangements and pay close attention to implementation.
In particular, due to the recent impact of low-temperature rain and fog weather, we should attach great importance to ensuring that no safety accidents occur during the "two sessions" of the country; To keep a clear head and improve the understanding of the concept of "security risk", we should change from focusing on the management of "things" to focusing on the management of "people", because the emergence of "security risk" in the management of "people" is even more terrible; We should conscientiously sum up the safety supervision work in XX years, sum up experiences and lessons, and lay a theoretical foundation for the construction safety supervision work in XX years.
Participants at the meeting: Zhang Yongle, Jiangmen Construction Bureau, Qi Rongzhan, He Ming, Chen Guangyuan, Qiu, Huang Huaixin, Hua Youkun, Lu, Liu Guangsheng, Chen, Zhao Jianbo, Liang Yu, Liang, Pengjiang Construction Bureau, Jianghai Construction Bureau, Yao Juncheng, Xinhui Construction Bureau, Liu Zhenning and Heshan Construction Bureau Li Yongcan.
Minutes of Trade Union Activity Meeting II On the afternoon of June 9th, Jiangbei District Housing and Urban-Rural Development Bureau hosted a pre-acceptance meeting for the completion of Tang Hong West Road Project in the conference room of the on-site project department of Tang Hong West Road Project. Participants attending the meeting included Municipal Construction Committee, Municipal Urban Management Bureau, Traffic Police Bureau of Municipal Public Security Bureau, Municipal Investment Company, Municipal Quality Supervision Station, Municipal Drainage Company, Municipal Water Supply Corporation, Municipal Public Transport Corporation, Municipal Street Lamp Management Office, Jiangbei Traffic Police Brigade, Jiangbei District Urban Management Bureau, District Transportation Bureau, District Agricultural and Water Bureau, Jiangbei Power Supply Bureau, Tang Hong Sub-district Office, Hefu Municipal Design Institute Co., Ltd., Ningbo College Construction Supervision Co., Ltd., Zhejiang Jinsheng Construction Co., Ltd. and Ningbo East China Construction. The relevant matters are summarized as follows:
1. Tang Hong west road project starts from the north outer ring in the south and ends at jiangbei avenue in the north, with a designed total length of 1 523.88m and a planned width of 44m. The construction standard is urban main roads. Main construction contents: roads and ancillary works, bridges, rain and sewage drainage pipes, water supply pipes, power trenches, supporting greening, street lamps, bus stops and traffic sanitation facilities. Communication and gas pipelines are implemented simultaneously as planned.
2. Participants agreed that the overall construction quality and appearance of Tang Hong West Road Project were good, and agreed that the project passed the preliminary acceptance of completion.
Three. Relevant contents specified in the meeting:
1. Because the southern end of the project involves the construction of the north outer ring elevated road, the section of pile number K0+0 18-K0+05 1 is not in place. After reporting to the Municipal Construction Committee and other relevant departments, it is agreed to abandon this part of the project construction content, and the unit will carry out the construction of the North Outer Ring Elevated Road.
2. The green space between the east red line of this road project (Changxing East Road to Jiangbei Avenue) and the existing residential fence and park is designed, and the specific design contact list is given. The cost is included in the total investment of this project.
3. In order to ensure the traffic safety of this road, the greening of the traffic island and the central isolation belt implemented at the intersection of Changyang East Road and Changyang East Road is transformed; Plastic-steel guardrails should be set at the sections with large roadside height difference at both ends of the bridge. The road traffic facilities at the intersection of Changxing East Road and Changyang East Road need to be further optimized, which will be determined by Jiangbei District Housing and Construction Bureau in conjunction with relevant units after the meeting. Specifically, a contact list is designed. The cost is included in the total investment of this project.
4. Bridges should be equipped with bridge nameplates and load-limiting plates, pedestrian walkways should be equipped with warning piles, and contact plates should be specially designed. The cost is included in the total investment of this project.
5. As the North Outer Ring Elevated Road and Jiangbei Avenue are under construction, brick walls with a height of 1 m are set at the north and south ends of the road in this project, and reflective no-go signs are set.
Four. What needs to be rectified in this project:
1. Completion data shall be delivered to relevant units as soon as possible, and special acceptance shall be conducted.
2, local asphalt concrete pavement damage should be rectified and reworked, and local sidewalk pavement should be rectified and reworked.
3, completes the finished product protection, green seedlings to strengthen maintenance, individual does not conform to the provisions of the seedlings and dead seedlings should be replaced or replanted in time.
4. Please ask the traffic facilities implementation unit to complete traffic facilities such as traffic marking and sign setting as soon as possible.
Five, the construction unit should be aimed at the problems raised in this meeting, in accordance with the design and specification requirements, pay close attention to the implementation of rectification, pay close attention to the preparation of project final accounts and improve construction materials, and conduct comprehensive acceptance after conditions are met.
Minutes of Trade Union Activities Meeting 3 Name of Meeting
Safety production summary coordination meeting
Meeting time
20xx August 16 pm
meeting place
meeting room
host
Participants: Sun Gangqiang,,, Guo, etc. Meeting contents: safety summary in the first half of the year and safety work implementation plan in the second half of the year. The meeting was presided over by Han. According to the spirit of the regular meeting of cadres held by the general manager, this paper summarizes the safety supervision and inspection work in the first half of 20xx, and makes new arrangements for the next work.
1, safety supervision and inspection. The main participants, safety officers and responsible persons shall issue rectification instructions according to the inspection situation; Hold regular safety meetings at the end of each month to report the recent safety work.
2. Safety inspection system. On-site inspectors, safety officers, management personnel, etc. All parts shall be inspected and registered according to the system. The frequency of inspection is low, and those who do not follow the system will be punished according to relevant regulations;
3. Factory vehicle management. At present, there are many cars in our company, so it is necessary to strengthen the supervision and management of on-site personnel. If violations are found, they must be stopped or notified to the security department for handling.
4. Conduct pre-job training for safety leaders and special operations personnel in different regions. Formulate part-time safety responsible persons in each region; The safety operation procedures of each post should be compiled into a book, and employees should be trained in a targeted manner.
5. Use of work permit. Individual personnel's work permit is not used in place, and signing the work permit by personnel at all levels also informs you to check its preventive measures and arrange personnel to check and assist, which also reflects the importance of safety. If the next inspection finds that the operation ticket has not been handled, it will be punished according to the regulations, and if the illegal operation is found, the punishment will be doubled.
6. The project safety label is clear. Use it as soon as possible after use, especially in the power distribution room, operation desk and other parts, which will play a warning role for operators and outsiders; Factory labeling must be carried out according to the promulgated national laws and regulations.
7. Lightning protection self-inspection. The equipment department uses the meter to conduct self-inspection on the grounding of the distribution room to see whether the grounding meets the requirements; At present, in order to reduce the damage of lightning and static electricity to electrical appliances or lines, some units have installed surge devices in dangerous parts such as gas stations to prevent damage. Let's see if we should install them.
Minutes of Trade Union Activity Meeting 4 20xx65438+On February 8th, Qu, Deputy Director of Ankang Municipal Facilities Management Office, presided over the completion acceptance meeting of Yantai Lane municipal comprehensive renovation project in Ankang City. Responsible persons of Hanbin District Planning and Design Institute, Shaanxi Anxin Supervision Company, Jiangbei Office, Yantai Village and Municipal Office attended the meeting. The minutes of the meeting are as follows:
1. The acceptance team and participants conducted site survey and referred to the engineering data in detail. The meeting first heard the summary reports of construction, supervision, design and other units, the construction unit made a report on the implementation of the project, and the inspection team made a report to the meeting. The municipal comprehensive reconstruction project of Yantai Lane in Ankang City has passed the acceptance evaluation, and the engineering data is standardized and the completion acceptance procedure meets the requirements.
2. The total investment in final accounts audit of this project is 763,422.67 yuan, including 707,885.53 yuan for Jian 'an project (the cost of road, drainage and water supply projects is 625,765,438 yuan +04.42 yuan, and the cost of street lamp projects is 8265,438 yuan+0765,438 yuan+065,438 yuan+). The prepaid expenses are 55537. 14 yuan (management fee of the construction unit 14 157.7 1 yuan, design fee 17697. 14 yuan, supervision fee1844).
3. Collective evaluation by the completion acceptance team: The comprehensive municipal reconstruction project of Yantai Lane in Ankang City passed the completion acceptance, and now it is officially put into the custody of Ankang Municipal Facilities Management Office. The warranty period is one year from the date of acceptance.
Four, the meeting put forward some problems such as engineering defects and incomplete completion drawings, and instructed the construction unit to carefully sort out the investigation and compare the implementation of rectification one by one. After the rectification results are confirmed by the supervision unit, they will be verified in writing to the Municipal Management Office according to the procedures.
Minutes of Trade Union Activities Meeting 5 On July 20th, 20xx, Zhu Meilin, Chairman of Trade Union, presided over the third quarter enlarged meeting of the Trade Union Committee of China Shipbuilding Industry (Jiangsu) Co., Ltd. in the company conference room 6 17. Trade union members and the chairman of the company's grass-roots branch attended the meeting.
I. Main agenda of the meeting:
(a) the chairman of the grass-roots trade union reported the work of the trade union in the second quarter;
(2) Chairman Zhu Meilin conveyed the spirit of the regular meeting of trade union chairmen in the second quarter of China Shipbuilding Industry Union;
(III) Chairman Zhu Meilin summarized the trade union work in the second quarter and deployed the trade union work in the third quarter.
Second, convey the spirit of learning the regular meeting of the superior trade union
Chairman Zhu Meilin conveyed the spirit of the regular meeting of trade union chairmen in the second quarter held by China Shipbuilding Industry Trade Union on July 6, mainly including the following aspects:
1, do a good job of labor protection and heatstroke prevention and cooling in summer, supervise and urge the administrative logistics measures to be in place, ensure the personal safety of employees, and zero heatstroke accidents of employees.
2. Care about the resigned employees, put care about the resigned employees in a certain position, and do a good job in stabilizing the retired employees.
3, do a good job in the company's golden autumn award (help). Trade unions should make a thorough investigation of employees with family difficulties and illness, help employees with difficulties, and make every employee's family afford to eat, get sick and learn.
4, each unit to develop advanced model training plan and scheme.
5, combined with the actual implementation of Lu Jinlin model worker innovation studio. The trade unions of all companies should learn from the experience of Lu Jinlin's model worker innovation studio and strive for the advanced collective and team of the company.
Summary of Trade Union Work in the Third and Second Quarters
(1) The company's trade unions won a series of awards.
On April 24th, the first team of the company's debugging workshop was awarded the title of "Worker Pioneer" by Jiangdu District Federation of Trade Unions, Gong Jian of the Operation and Supply Department was awarded the title of "May 1st Female Model Worker" in Yangzhou City, and Ding Min was awarded the title of "May 1st Female Model Worker" in Jiangdu District.
On May 7th, our company won the title of advanced collective; He Min, the welder of the auxiliary labor service company, won the title of "May 1st Labor Medal" and "Technical Expert" in Yangzhou City at the summary commendation meeting of implementing the "Three-year Plan for Training Millions of Employees"; Tong Xiong, the information center of our company, won the title of "Excellent Player" in computer operation in the 20xx Yangzhou Workers' Vocational Skills Competition; and Wang Chao, the welder of the auxiliary labor service company, won the title of "Excellent Player" in welding.
(B) to carry out corporate cultural activities to cultivate noble sentiments of workers.
In order to celebrate the 62nd International Labor Day and carry forward the enterprise spirit of "love my China and be brave in creating first-class", the company's trade union organized 40 advanced individuals, outstanding party member, outstanding party workers, outstanding trade union cadres and trade union activists to have a 20xx annual spring outing.
At the end of April, the trade union organized 156 contestants to have a physical examination and participated in the "China Maritime Cup" Yangzhou Jian Zhen International Half Marathon.
In May, the trade union organized a collection of photographs of "China Shipping Shipbuilding Style", and received a total of 86 photographs of employees. After selection, there were 3 first prizes, 6 second prizes and 3 third prizes 10. Twenty works were selected and submitted to Yangzhou Federation of Trade Unions and Jiangdu Federation of Trade Unions to participate in the "We Workers Have Strength" staff style photography exhibition to show the spiritual outlook of China people.
In June, the company's football team participated in the indoor five-person championship in Yangzhou Division of "Kaasila Cup" and "Come on Chinese Dream European Cup".
On June 27th, a large-scale dance "Hello Motherland" rehearsed by the company's labor union and female singing "The Call of the Soul" and "Piloting China" performed on behalf of China Shipbuilding Industry Co., Ltd. in Shanghai Oriental Art Center.
On February 2nd, China Shipping (Group) Corporation was established15th anniversary commemorative meeting, which fully demonstrated the vigorous spirit of China shipping industry in actively pursuing the development strategy of "building and repairing simultaneously".
In the second quarter, the trade union, together with Yangzhou Federation of Trade Unions and Jiangdu Federation of Trade Unions, screened three films for the contractor in the second canteen base.
(3) Caring for workers' lives and guiding workers to help each other through the "severe winter"
On April 28th, the trade union organized an activity to help send warm in the second quarter of 20xx, offering condolences to 3 employees in difficulty, with a total amount of 3,000 yuan.
On May 3 1 day, the trade union bought books, food, umbrellas, etc. And expressed condolences to the two poor students of Tangtou Primary School in Guocun Town, Jiangdu poverty-stricken area, and encouraged them to study hard and be positive. Let poor students have a happy Children's Day.
In the second quarter, the trade union sent birthday cakes for 12 employees' whole birthdays, and 1 employees' parents died, with a total condolence amount of 1800 yuan.
(four) to carry out merit activities, do a good job of heatstroke prevention and cooling.
The second quarter has entered the hot season, and the trade union cares about the health and personal safety of employees and contractors in the spirit of "people-oriented". In the second quarter, distribute heatstroke prevention and cooling supplies to local workers and laborers in the whole factory, and urge the contracting company to do a good job in heatstroke prevention and cooling. By the end of June, the factory had installed 27 direct drinking machines, 30 automatic water heaters, 8 automatic beverage vending machines/KLOC-0, and 98 tea spots. The arrival of these equipment and facilities has provided the necessary guarantee for front-line workers to successfully survive the high temperature period in summer.
According to No.20 Notice of Industrial Trade Union on Organizing Workers' Representatives to Patrol and Inspect Labor Protection, Work Safety and Summer Heatstroke Prevention and Cooling, the company's trade unions also carried out a series of related activities:
1, according to the requirements of fine production safety, carry out the activity of striving for the 15th "China Shipping Cup" safety and defect-free winning team;
On 2/61day, the trade union organized representatives of workers to inspect labor protection, production safety and heatstroke prevention and cooling in summer, and timely investigated 7 hidden dangers of accidents and implemented them within a time limit;
3. On June 28th, the trade union cooperated with the administrative department to organize the study and education activities of safety production responsibility in the form of teams and groups according to the Safety Knowledge Reader for Ship Repair Team Leaders.
4. Make full preparations for heatstroke prevention and cooling, set up 1000 square meters of first-line high-temperature workers' rest place, equipped with air conditioning, curtains and tea. Strengthen the knowledge training of high-temperature workers, do a good job in the management and supervision of canteens, do a good job in the preparation of "sending cool" condolences in summer, and conduct a health examination for tea delivery workers in 14 summer.
Iv. arranging the work of trade unions in the third quarter
1. Establish a workers' home: set up an activity room on the 3rd floor of 1 canteen, equipped with table tennis, treadmill, combined fitness equipment, etc. , open to the broad masses of employees, and formulated the "Measures for the Administration of Workers' Homes of China Shipping Industry (Jiangsu) Co., Ltd.", and the staff activity room is managed by a special person.
2. In July, the company introduced 68 college students, and the trade union cooperated with the administrative department to arrange accommodation for college students. Jiangdu has established 1 basketball court and 1 badminton court, which have enriched the amateur cultural life of college students.
3. In the third quarter, the trade union urged the contracting construction company to carry out high temperature inspection on the workers.
4. During the high temperature period, continue to inspect the rest place at noon, deliver water and "cool down".
5. Continue to cooperate with Yangzhou Federation of Trade Unions and Jiangdu Federation of Trade Unions to show movies for contracted construction workers every month.
6. The trade union will guide the contractor to gradually establish a trade union organization.
7. For the convenience of workers, a small supermarket was set up in the beach building of the factory.
8. Further promote the implementation of matters related to the second employment meeting of the company.
Proofreading: Wang Huijuan Newspaper: China Shipbuilding Industry Federation.
Cc: Party committee, company leaders and grass-roots branches of the company.
;