Question 2: How many kilometers is the drive from Hua Kai to Yiwu? The whole journey is about 189.3 km.
Starting point: Kaihua County
1. Kaihua County Driving Plan
1) Start from the starting point, go north along Jiefang Street 120 meters, and turn right into Gongren Road.
2) Drive along Gongren Road160m and turn left into Jiang Bin North Road.
3) Drive along Binjiang Binbei Road for 760m and go straight into Jiang Bin North Road.
4) Drive 60 meters along Yan Bin North Road and turn left into Qinbei Road.
5) Drive along Qinbei Road130m and turn right.
6) Drive 400 meters and go straight on the ramp.
7) Drive along the ramp for 350 meters. After passing the bottom of the field for about 230 meters, turn right slightly in the direction of Quzhou and get on the ramp.
2. Drive along the ramp for 560 meters and enter the Beijing-Taiwan Expressway at the entrance.
3. Drive along the Beijing-Taiwan Expressway for 36.0km, then turn right slightly in the direction of Quzhou/Nanchang/Jinhua/Shangrao and enter Wuli Hub.
4. Drive along Wuli Hub for 360m, drive towards Hangzhou/Jinhua, turn left slightly and enter Wuli Hub.
5. Drive 760m along Wuli Hub, cross Wuli Hub and enter Shanghai-Kunming Expressway at the entrance.
6. Drive along Shanghai-Kunming Expressway 128.8km, exit Yiwu/Shangxi /S 103 and enter Shangxi Interchange.
7. Drive along Shangxi Interchange for 450 meters and go straight up the ramp.
8. Yiwu driving scheme
1) Drive along the ramp for 380m, and turn right slightly in the direction of Fotang/Jinyong Expressway/Hangzhou-Ningbo/Yiwu.
2) Drive along the ramp for 90 meters and go straight into Shangfo Line.
3) Drive 2.9 kilometers along Shangfo Line and turn left into Hayes Avenue.
4) Drive 9.2km along Haisi Avenue and turn left into Huancheng West Road.
5) Drive along Huancheng West Road for 740m and turn right slightly towards Jinhua/downtown.
6) Drive 50 meters, turn left slightly and enter Longhui overpass.
7) Drive along Longhui overpass for 2 10 meters, turn right slightly towards the urban area and enter Longhui overpass.
8) Drive along Longhui overpass for 600 meters and go straight to S03.
9) Drive along S03 1.0km and go straight into Xicheng Road.
10) Drive along Xicheng Road for 3.3km, drive in the direction of Xianqian Street, turn right ahead and enter the roundabout.
1 1) Drive around the island for 20 meters, take the 1 exit, turn right ahead and enter Danxi North Road.
12) Drive along Danxi North Road for 850m and turn left.
13) Drive 10 meter and go straight into Worker's West Road.
14) Drive along Worker's West Road for 3 10 meters, pass the office building of Tonghui Community on the left for about 200 meters, and turn right into Beimen Street.
15) Drive along Beimen Street for 250 meters and turn left into Xianqian Street.
16) Drive along Xianqian Street 1 10 meter to the finish line (on the left side of the road).
End point: Yiwu city
Question 3: How many kilometers is the drive from Hua Kai to Yiwu International Trade City? The whole journey is about 194.8 km.
Starting point: Kaihua County
1. Kaihua County Driving Plan
1) Start from the starting point in the true north direction, drive along Jiefang Street for 860m, and turn right into Qinbei Road.
2) Drive along Qinbei Road 130m and turn left into Xiangxi Road.
3) Drive along Xiangxi Road for 420 meters and go straight on the ramp.
2. Drive along the ramp 1. 1 km and go straight into Beijing-Taiwan Expressway.
3. Drive along the Beijing-Taiwan Expressway for 36.0km, then turn right slightly in the direction of Quzhou/Nanchang/Jinhua/Shangrao and enter Wuli Hub.
4. Drive 630 meters along Wuli Hub, pass Wuli Hub for about 490 meters, and go straight into Shanghai-Kunming Expressway.
5. Drive along the Shanghai-Kunming Expressway 12 1.6km, cross the Xietang Interchange, head for Ningbo/Fucun/Jinyi Metropolitan New Area (East)/Dongyang, turn right slightly and enter Fucun Hub.
6. Drive 620 meters along fu cun Hub, pass through fu cun Hub for about 300 meters, and go straight into Jinyong Expressway.
7. Jinhua City Driving Plan
1) Drive along Jinyong Expressway 18.9 km, exit at Xucun/Yiwu Airport, turn right slightly and enter Xucun Interchange.
2) Drive along Xucun Interchange 1. 1 km, cross Xucun Interchange and turn right.
3) Drive, cross Xucun overpass for about 320 meters, and go straight into Fotang Avenue.
4) Drive along Fotang Avenue 1.2km and turn right into Huancheng South Road.
5) Drive 5.5km along Huancheng South Road and turn left into Yidong Road.
6) Drive along Yidong Road1.7km, cross Dongjiang Bridge and turn right into Jiang Bin North Road.
7) Drive along Binbei Road along the river for 2.9 kilometers and go straight into Futian Road.
8) Drive along Futian Road for 590 meters and turn left into Shangcheng Avenue.
9) Drive along Shangcheng Avenue for 2 10 meters.
10) Drive 50 meters and turn right.
1 1) Drive 50 meters to the finish line (on the right side of the road).
End point: Yiwu International Trade City, China
Question 4: The bus time from Yiwu to Hua Kai is 40 minutes, and the departure time from Yiwu to Hua Kai 79 is 08: 30, 1 1: 40, 14: 40 respectively.
The departure time of Yiwu-Hua Kai Route 67 is 08: 30, 1 1: 40, 14: 40 respectively.
It takes about 2.5 hours to arrive.
Question 5: How to take the driving route from Yiwu to Hua Kai Yanglin Expressway? The whole journey is about 2 14.7 km.
Starting point: Yiwu
1. Jinhua urban driving plan
1) Start from the starting point to the west, drive along Xianqian Street for 5 10 meters and enter Danxi North Road.
2) Drive along Danxi North Road for 580 meters and go straight into Danxi Road.
3) Drive along Danxi Road 1.8km and turn right into Jiangdong South Road.
4) Drive 3.0km along the southeast road of the Yangtze River and go straight into Fotang Avenue.
5) Drive along Fotang Avenue 1.5km and get on the ramp.
6) Drive 600 meters along the ramp and go straight into Jinyong Expressway.
7) Drive along Jinyong Expressway 18.8km and go straight on the ramp.
2. Drive along the ramp 1.5km and go straight into Shanghai-Kunming Expressway.
3. Drive along Shanghai-Kunming Expressway 139.9 km, get off at Changshan/Hua Kai /G320 exit, and turn right slightly to enter Changshan Interchange.
4. Drive 860m along Changshan Interchange and go straight.
5. Drive 380m to Hua Kai/Wuyuan, turn right slightly and get on the ramp.
6. Drive 300 meters along the ramp and go straight into Zhufu Line.
7. Drive along Zhufu Line for 3.7 kilometers, turn left slightly and enter Shenshan Line.
8. Drive along Shenshan Line 190 meters, turn right ahead and enter Shenshan Line.
9. Quzhou City Driving Plan
1) Drive along Shenshan Line 14.9 km, drive in the direction of Wuyuan /S3 17, and turn left slightly to enter Bai Hua Line.
2) Drive along Bai Hua Line for 26. 1 km, and then turn right.
3) Drive 1 10 meters to the finish line.
End point: Hangxinjing Expressway entrance
Question 6: How many kilometers is the drive from Hua Kai to Louxia Village in Yiwu? The whole journey is about 7 1.3 km.
Starting point: Hua Kai.
1. Jinhua urban driving plan
1) Start from the starting point in the east direction, leave Baitang Line for 7.3km, head for Jinhua, and go straight into Jinlong Road.
2) Drive along Jinlong Road 2. 1km and pass Shan Ge on the right. After crossing the street for about 150 meters, turn left and enter the north of West Second Ring Road.
3) Drive 4.2km along the North West Second Ring Road and go straight into the West Second Ring Road.
4) Drive 5.2km along the West Second Ring Road and go straight into the North Second Ring Road.
5) Drive along the North Second Ring Road 1.9 km and turn left into Yingbin Avenue.
6) Drive 60 meters along Yingbin Avenue and go straight into Yingbin Avenue.
2. Drive along Yingbin Avenue 1.2km, cross Jinhua Interchange for about 220m, and go straight into Shanghai-Kunming Expressway.
3. Drive along the Shanghai-Kunming Expressway for 22.8km, cross the Xietang Interchange, head for Ningbo/Fucun/Jinyi Urban New District (East)/Dongyang, turn right slightly, and enter Fucun Hub.
4. Drive 920 meters along fu cun Hub and go straight into Jinyong Expressway.
5. Yiwu driving scheme
1) Drive along Jinyong Expressway 18.9 km, exit at Xucun/Yiwu Airport, turn right slightly and enter Xucun Interchange.
2) Drive along Xucun Interchange 1. 1 km and turn right ahead.
3) Drive 320 meters and go straight into Fotang Avenue.
4) Drive along Fotang Avenue 1.2km and go straight into Jiangdong South Road.
5) Drive along the southeast road of the Yangtze River for 580 meters and turn left into Liming Lake Road.
6) Drive along Liming Lake Road for 990 meters and go straight into Xinke Road.
7) Drive along Xinke Road for 320 meters, cross Ling Bo Bridge and turn right into Jiang Bin South Road.
8) Drive along Binnan Road along the river 1.3km, and turn left into Chongde Road.
9) Drive along Chongde Road for 290 meters and turn left into Fengqi Street.
10) Drive along Fengqi Street 130 meters to the finish line.
End point: Louxia Village
Question 7: How many hours does the shuttle bus from Yiwu to Kaihua County take? There are many shuttle buses from Yiwu Ding to Hua Kai, which are about 1 hour, and the departure time is from 8: 30 am to 2:40 pm.
It takes about 2.5 hours to arrive, (Yiwu to Huabu Town is a high speed) Yiwu Nanfang United Bus Terminal leaves.
Question 8: How many kilometers is the driving route from Pujiang County to Kaihua County in Quzhou? The whole journey is about 207.6 kilometers.
Starting point: Pujiang County
1. Pujiang county driving plan
1) Start from the starting point to the west, drive along Renmin East Road for 240 meters, and turn left into Heping South Road.
2) Drive 430m along Heping South Road, cross the Pujiang Store of Yibaili Yiwu Small Commodity Direct Selling Supermarket on the right, and turn left into Jiang Bin Middle Road.
3) Drive along Binjiang Zhong Bin Road 1. 1 km, cross Risheng Building on the left, and turn right slightly into Jiang Bin East Road.
4) Drive along Binjiang East Road for 690 meters and go straight into Jiang Bin East Road.
5) Drive along Binjiang East Road 10 meter. After passing the red building on the left for about 200 meters, get off at the second exit, drive in the direction of G60/ Yiwu, and then go straight into Changheng Avenue.
6) Drive along Changheng Avenue for 3.8km and enter Yongzai Avenue.
7) Drive along Yongzai Avenue for 780 meters, and then turn left.
8) Drive for 420m and go straight into S2 10.
9) Drive 7.6 kilometers along S2 10, and go straight on the ramp.
2. Drive along the ramp 170 meters, cross Pujiang Interchange for about 350 meters, and go straight into Shanghai-Kunming Expressway.
3. Drive along Shanghai-Kunming Expressway 150.9 km, head for Jiangshan/Hua Kai/Nanping/Huangshan, turn right slightly and enter Wuli Hub.
4. Drive along Wuli Hub 1. 1 km and go straight into Beijing-Taiwan Expressway.
5. Drive along the Beijing-Taiwan Expressway for 36.4km, exit at Hua Kai, turn right slightly and get on the ramp.
6. Drive along the ramp1.5km, and then turn left.
7. Kaihua County Driving Scheme
1) Drive 780m and go straight into Xi Gu Road.
2) Drive 470 meters along Xi Gu Road and enter the city bottom line.
3) Drive 580m along the city bottom line, cross the Qinjiang Bridge and turn right into Jiefang Street.
4) Drive along Jiefang Street 1 10 meters and reach the destination (on the right side of the road).
End point: Quzhou, Hua Kai
Question 9: How to get to Xiashan Village in Hua Kai from Yiwu? The whole journey is about 690.7 kilometers.
Starting point: Yiwu
1. Xuzhou driving plan
1) Depart from the starting point due east, drive for 50 meters, and turn right into Zhu Min South Road.
2) Drive along Zhu Min South Road for 40m, pass Tianlu Building on the right about 140m, and then turn right into Heping Road.
3) Drive along Heping Road 1.3km and turn left into Zhongshan South Road.
4) Drive along Zhongshan South Road for 760m, drive towards Hudong Road, and turn right slightly to enter Hudong Road.
5) Drive along Hudong Road for 2.4 kilometers and go straight into Jinshan South Road.
6) Drive along Jinshan South Road 1.2km and go straight into Daxue Road.
7) Drive 5.0km along Daxue Road, turn right and enter Liutong Line.
8) Drive along Liutong Line 1.9 km, cross Duwo Bridge and turn left on the ramp.
9) Drive along the ramp 130m, cross Duwo Bridge about 1.0km, and go straight into the Northwest Ring Expressway.
10) Drive along the Northwest Ring Expressway for 3.6 kilometers, turn right slightly in the direction of Hefei/Zhengzhou /G3/G30, and enter Luogang Hub.
1 1) Drive 220 meters along Luogang Hub, pass Luogang Hub for about 170 meters, and go straight into Lianhuo Expressway.
12) Drive along Lianhuo Expressway for 6. 1km, turn right slightly in the direction of Xiaoxian/Hefei/Fuzhou/Huangcangyu, and enter Zhuweizi Hub.
2. Drive along Zhuxuzi Hub for 760m, pass Zhuxuzi Hub for about1.2km, and go straight into Beijing-Taiwan Expressway.
3. Drive along the Beijing-Taiwan Expressway for 262.6 kilometers, head for Wuhu/Nanjing/Tongling/Fuzhou, turn right slightly, and enter Hefei Ring Expressway.
4. Drive along Hefei Ring Expressway 1.2km, cross the intersection and go straight into Hefei Ring Expressway.
5. Drive along Hefei Ring Expressway for 3 1. 1 km, turn right slightly in the direction of Tongling/Fuzhou/Anqing /G3 and enter Beijing-Taiwan Expressway.
6. Drive along Beijing-Taiwan Expressway 1.0 km, pass Xiaoxichong Hub for about 270 meters, and go straight into Beijing-Taiwan Expressway.
7. Drive along the Beijing-Taiwan Expressway for 60.8km, heading for Tongling/Huangshan/Fuzhou, and turn right slightly to enter the Beijing-Taiwan Expressway.
8. Drive along Beijing-Taiwan Expressway 1.5km and go straight into Beijing-Taiwan Expressway.
9. Drive along the Beijing-Taiwan Expressway for 72.6 kilometers and go straight into the Beijing-Taiwan Expressway.
10. Drive along Beijing-Taiwan Expressway for 50 meters and go straight into S 103.
1 1. Follow S 103 for 3.8km and go straight into Beijing-Taiwan Expressway.
12. Drive along Beijing-Taiwan Expressway for 3 10 meters and go straight into Beijing-Taiwan Expressway.
13. Drive along Beijing-Taiwan Expressway for 223.0km, at Majin exit, turn right slightly and get on the ramp.
14. Quzhou driving plan
1) Follow the ramp 1. 1 km, turn left and enter G205.
2) Drive along G205 for 3.8km, cross Xiashan Bridge, go to Tang Wu/Qiandao Lake, turn right and enter Yangxia Line.
3) Drive 200 meters along the Yangxia Line to reach the finish line.
End point: Xiashan ancient dwellings
Question 10: How many kilometers is the driving route from Yiwu to Chiwu? The whole journey is about 5 12.5 km.
Starting point: Yiwu Economic and Technological Development Zone ...
1. Jinhua urban driving plan
1) Start from the starting point to the southwest, drive along Yangcun Road for 660m, and turn right slightly to enter Hayes Avenue.
2) Drive along Haisi Avenue for 9. 1 km and turn right into Shangfo Road.
3) Drive along Shangfo Road for 2.7 kilometers and go straight on the ramp.
2. Drive along the ramp 1.3km and go straight into Shanghai-Kunming Expressway.
3. Drive along Shanghai-Kunming Expressway 147.2km, get off at Changshan/Hua Kai /G320 exit, turn right slightly and enter Changshan Interchange.
4. Drive along Changshan Interchange for 670 meters. After crossing Changshan Interchange for about 860 meters, go straight into Zhufu Line.
5. Drive along Zhufu Line for 3.9 kilometers, turn right and enter G205.
6. Drive along G20515.0km, go to Wuyuan /S3 17, turn left slightly and enter Bai Hua Line.
7. Drive along Bai Hua Line for 40.4 kilometers and go straight to S202.
8. Follow S202 for 2. 1km, and turn right on the ramp.
9. Drive along the ramp for 700 meters and go straight into Wu De Expressway.
10. Drive along Wu De Expressway for 3 1.9 km, cross Wuyuan Interchange, turn left in the direction of Jingdezhen/Jiujiang/Xianning /G56, and enter Hangrui Expressway.
1 1. Drive along Hangrui Expressway 1.2km, cross Wuyuan Hub and go straight into Hangrui Expressway.
12. Drive along Hangrui Expressway 199.2km, and turn right slightly on the ramp in the direction of Huangshi/Nanchang/Xianning/Fuzhou.
13. Drive along the ramp for 240m and turn right into Yin Fu Expressway.
14. Drive along Yin Fu Expressway for 22. 1 km, turn right slightly and enter Jiujiang County Hub.
15. Drive along Jiujiang County Hub for 850m, cross Jiujiang County Hub for about 140m, and go straight into Hangrui Expressway.
16. Drive along Hangrui Expressway for 27.7 kilometers, cross Changhe Bridge, exit Ruichang/downtown /S304, and turn right slightly on the ramp.
17. Follow the ramp for 6 10 meters and go straight.
18. Jiujiang driving plan
1) Drive 1.2km, turn left slightly and enter S304.
2) Drive along S3041.4km, turn left and enter Yi Xi Road.
Drive along Yi Xi Road for 400 meters, and then turn left slightly.
4) Drive for 370 meters and turn left into Chiwu Avenue.
5) Drive 50 meters along Chiwu Avenue and turn around and enter Chiwu Avenue.
6) Drive along Chiwu Avenue for 20 meters and reach the finish line.
End point: Chiwu