You just graduated, basically not bad. You can apply for the basic examination of registered electrical engineer immediately, and you can apply for this major in four years. Good luck.
Can fresh graduates majoring in electrical engineering be electrical engineers? Electrical engineers have to take the qualification examination, and the light certificate is about 300,000 a year. You may be talking about a position in the unit, but that depends on the requirements of each unit for this position.
Hello, I'm a mechanic, and I want to know about the chrome plating process. Electroplating refers to a surface treatment method in which cations of the metal to be plated in electroplating solution are deposited on the surface of the base metal by electrolysis in a salt solution containing the metal to be plated. The coating efficiency is different from the base material and has new characteristics. According to the function of coating, it can be divided into protective coating, decorative coating and other functional coatings.
During chromium plating, the parts are used as cathode, Pb-Sb alloy as cathode, chromic anhydride and sulfuric acid as electrolyte, and the working temperature is 55 ~ 65 degrees Celsius.
The chromium layer has high hardness, reaching 400HV- 1200HV, good wear resistance, strong reflection ability and good heat resistance. There is no obvious change in luster and hardness below 500 degrees Celsius. When the temperature is greater than 500 degrees Celsius, it begins to oxidize and change color; It didn't begin to soften until it exceeded 700 degrees Celsius.
Chromium plating layer is divided into protective chromium plating layer, decorative chromium plating layer and wear-resistant chromium plating layer. Wear-resistant chromium plating can improve the surface wear resistance of parts, prolong the service life and repair worn and corroded parts.
Hard chromium plating: the chromium layer has high hardness, good wear resistance and certain toughness. It is used to lubricate the surface of parts with good conditions and less compounding, and is suitable for crankshafts of diesel engines and compressors, plungers of high-pressure oil pumps, etc.
Loose chromium plating layer: the surface is reticulate or porous, which can store lubricating oil. When working, the lubricating oil flows out of the pores and overflows the working face, and the lubricating oil is distributed along the pores, which improves the lubrication conditions and reduces the wear.
I am a college student (majoring in electrical engineering and automation) who will graduate in 2007. I want to ask about the direction of employment. Electrical engineering machinery automation major is a universal oil major, which is broad and not professional. High-voltage and low-voltage electronics are involved, and even Haier and other home appliance companies can enter. But they are basically power plants, power supply bureaus and power construction.
Power plants are well paid, and the best is nuclear power plants. They basically confessed all the top majors. Generally speaking, the new power plant is well paid, with less personnel burden, large investment, high degree of automation and good treatment, with a general treatment of more than 6 thousand. However, the working environment of the power plant is very bitter, there are no holidays, three shifts, loud noise and strong radiation, and there is no place to spend money. If you live in two places with your girlfriend, you should think carefully.
The electric power bureau is the golden unit in everyone's eyes, but the treatment of the electric power bureau is also very different, and different regions are different. The post of electric power bureau can be competent for this major, but power grid engineering needs two to three years of exercise, as well as skill appraisal examination and professional title evaluation. Don't think that the power bureau is drinking tea and chatting, and the work of the power bureau is also very hard. If there are work arrangements, holidays and rest days will be sidelined. There are many situations. In any case, you are entitled to say that your major is good and you can develop in five years.
The power construction unit is very bitter, running all over the country, and basically not going home. The working environment is very tired. If you want to go, you should be mentally prepared.
Electric power research and development enterprises, such as Nanzi, Nanrui and Sifang, you should have a deep understanding of computers. There are not many really good jobs in such enterprises, and many of them are after-sales services. Because you bought a piece of equipment, you have to cooperate with the installation of the calibration equipment of the power supply bureau, so the power supply bureau will call the manufacturers as soon as there is a project, so that they can come after the sale.
The golden age of electric power graduates has passed. Now the state controls power plants and energy-intensive enterprises on a large scale. The new power plant that has been put into operation was full two years ago, and a power plant has 50 or 60 people or less. Power companies are strictly controlling personnel, but it will take at least ten years for such a large enterprise to digest the hidden dangers left by the unreasonable employment system. So your major must be very good. You are a junior now, and your professional ranking is very high. Then your job will be better, it's as simple as that.
I am a college student (major in power system and automation) who will graduate in 2007. Want to ask you about the direction of employment? I will graduate in 2007.
My major is the same as mine, except that I graduated in 2008.
I think most of our majors still go to power plants.
Or a power plant owned by a large enterprise, the treatment can be better.
Other things, it is also possible to do some auxiliary power maintenance and power design institute work.
This is my feeling, because I am also looking for a job, so let me talk about my opinion.
I am a newly graduated college student, majoring in interior design. I want to get a qualification certificate as a designer. What do I need to learn and how do I get it? Haha, brother, I advise you not to rely on it. What people want is your performance. You can go anywhere with a monthly income of10.002 billion after graduating from primary school.
Great god! I just graduated from electrical engineering. Show me the way! OTL: I just graduated for two years. At present, I am doing electrical technical work in a state-owned enterprise. The deepest feeling is that the knowledge in the textbook is really useful. If you don't study hard, you'd better make up slowly at work. If you really want to develop this electrical appliance industry, I suggest you find a bigger company to experience it first. Schools can tell you a lot of theoretical knowledge. What you lack is the ability to combine theory with practice. Why find a big company? Because electricity, after all, is an invisible and intangible thing. If you don't have high business ability, it is easy to have an accident and hurt yourself or others. You can slowly improve yourself, broaden your horizons and gain knowledge in experienced masters or teams, killing two birds with one stone. There is also a lot of room for the development of electricity. If you are interested in higher education, you can develop towards management. If you just want to engage in technology, you can take an examination of technicians or electrical engineers if you have the conditions. The income is also considerable, and the technical experts in our factory also work in the office, and the income is not less than that of the leaders. These are some things that I summed up according to the working experience of the leaders and teachers around me at present. I wonder if they are of any use to you!
Would you like to know that some factories and enterprises now recruit students who have just graduated from electrical major or students from higher vocational colleges who have just graduated from electrical major, and their salary can reach 3000-5000? Absolutely. I work in the human resources department, mainly responsible for factory recruitment. Seriously, professional counterparts, the salary is 5-6 thousand.
I am a newly graduated college student and work in the power supply bureau. I write an article about how I love electricity, 1 and why I entered our power enterprise (general direction).
2. We provide efficient green energy (understanding of enterprises)
3, your understanding of the type of work, and the degree of love (understanding of yourself and your work)
4. The long-term mechanism of quality service is closely related to our customers, and customer satisfaction is our pride (reflecting the central idea of "electricity for the people" in our enterprise and our pursuit).
5. The enterprise is well paid. What have we done for the enterprise? What contribution have I made to the enterprise?
Loving the enterprise is what every electric worker should do!
Green energy, we provide!
I am a college graduate majoring in visual communication. After graduation, students majoring in art design, visual communication design can be graphic designers in graphic design departments of advertising companies and design companies. Art editor, Graphic Design Department of TV stations, newspapers, magazines, large websites and other media units; As a graphic designer in the planning department of enterprises and institutions.
This is a major that is easy to find a job. Specifically, it is a two-way choice between graduates and employers.