Automation department has automation specialty. Founded in 1958, this major is a famous and national specialty in Shaanxi Province, covering the fields of motion control, process control, power electronics technology, detection and automation instruments, electronics and computer technology, information processing, management and decision-making. It mainly trains senior applied engineering and technical personnel in system analysis, system design and system operation.
teacher
There are 0/4 professional teachers in Automation Department, including 2 professors, 4 associate professors, 8 lecturers and 43% teachers with senior titles. There are 3 teachers with doctor's degree, 4 are studying for doctor's degree, and 86% are teachers with master's degree or above. Mainly engaged in intelligent control theory and its application in safety production, and has done a lot of research work in inclined shaft anti-skid monitoring device, coal railway dispatching supervision system and other aspects, forming a distinctive industrial and mining application characteristics.
Trial teaching
In order to adapt to the characteristic education and enhance the practical teaching ability, the basic laboratory and professional laboratory of 10 have been built successively, and the PIC single chip microcomputer laboratory has been built with MSI company of the United States, with advanced experimental equipment. Adhere to the road of combining Industry-University-Research, and set up off-campus practice bases in large enterprises such as Dongfeng Motor Company, Xuji Group Company, China Yi Tuo Group Co., Ltd., Shaanxi Lingyun Electric Appliance Company and xi Ankesai Co., Ltd.
Employment direction
Graduates can engage in the maintenance, optimization, design, development and teaching of automation systems and related software, and the one-time employment rate has remained above 98% over the years. Basic profile
The department of measurement and control technology has the specialty of measurement and control technology and instrument, and 1993 began to recruit students. Its predecessor was measurement and control technology specialty, and 200 1 was renamed measurement and control technology and instrument specialty.
This major trains senior engineering and technical personnel who have the design and application ability of measurement and control instruments, measurement and control theory and technology, and measurement and control system, and can engage in research and development, design and manufacturing, application management and other work in the field of measurement and control.
teacher
There are 15 professional teachers in the department of measurement and control technology, who undertake the teaching and research of professional courses. Among them, there are 2 doctoral supervisors, 8 masters, 5 professors, 5 associate professors and 5 lecturers. Teachers with senior titles account for 66%.
In recent years, teachers in this department have undertaken 15 subjects and published more than 100 academic papers, of which more than 20 were included by EI. Won 3 national invention patents, provincial teaching achievement award 1, school-level teaching achievement award 1, and 5 teaching materials.
Trial teaching
The department attaches great importance to teaching practice and has three professional laboratories: process control laboratory, single chip microcomputer laboratory and automation instrument laboratory. Combined with professional characteristics, we signed internship cooperation agreements with many units, including Xi 'an Thermal Power Plant and Xi 'an Instrument Factory, as well as Yangzi Petrochemical, Lanzhou Petrochemical and Weihe Fertilizer Plant. Actively practice the school-enterprise cooperation mode, and jointly build the Lingyang MCU laboratory with Taiwan Province Lingyang Company.
Employment direction
The employment of students is mainly oriented to design and manufacture units of measurement and control instruments, design and installation units of automatic control systems and application units of automatic control systems. The one-time employment rate has remained above 95% for many years. Basic profile
The Department of Electric Power Engineering has the specialty of electrical engineering and its automation, whose predecessor was the specialty of electric power system and its automation, and began to enroll students 1997. The curriculum covers equipment manufacturing, system operation, automatic control, power electronics technology, information processing, experimental analysis, technology development, economic management, computer application and other fields, and mainly trains applied senior professionals with certain innovative spirit and research and development ability in electrical engineering and related fields.
In recent years, this major has strengthened cooperation with industrial and mining enterprises in combination with regional characteristics, and developed several sets of products, such as frequency conversion electric control system of main ventilator in coal mine, frequency conversion electric control system of belt conveyor in coal mine and frequency conversion electric control system of hoist in coal mine. According to the field requirements, it has been popularized and applied in western coal enterprises, and the effect is good.
teacher
The Department of Electric Power Engineering has three professional teachers 13, including professor 1 3, associate professor 2 and lecturer 10. There are 2 teachers with doctor's degrees, 2 are studying for doctors, and 93% are teachers with master's degree or above.
All the teachers in the Department of Electric Power Engineering actively carried out scientific research and technological development, obtained 5 national patents, published more than 50 academic papers 150, of which 53 were searched by SCI, EI and ISTP, compiled 5 textbooks and participated in 2 textbooks, and undertook many teaching reform projects, and the teaching level was continuously improved.
Trial teaching
The department pays attention to teaching practice, and has three professional laboratories: comprehensive automation laboratory of power system, relay protection laboratory and high voltage technology laboratory. According to the professional characteristics, we have successively signed internship cooperation agreements with Xi Baqiao Thermal Power Plant, Hubei Gezhouba Power Plant and Baoji Shitouhe Hydropower Station as the bases for students' cognitive internship, production internship and graduation internship. Cooperate with Xi Anxirui Protection and Control Equipment Co., Ltd. to run schools and jointly carry out personnel training and scientific research and development.
Employment direction
Mainly engaged in electric power construction, manufacturing, operation, maintenance and automation control of electric power design institutes, power plants, electric power companies and industrial and mining enterprises, and the one-time employment rate has remained above 97% over the years. Basic profile
The Department of Electronic Science has a microelectronics major and began enrolling students in 2004. This major has distinctive features and a strong faculty. It mainly trains senior engineering and technical personnel who meet the needs of socialist modernization, have broad theoretical basis, professional knowledge and experimental ability, and can be engaged in the design, manufacture, application and new product development of various semiconductor devices, large-scale integrated circuits and system-on-a-chip (SOC) in electronic information and related fields.
teacher
The Department of Electronic Science has 10 teachers, including 2 professors, 4 associate professors and 3 lecturers, and 60% of them have senior titles. Doctoral degree 1 person, 3 doctoral degrees and 7 master degrees.
In recent two years, * * * has undertaken nine vertical projects and published more than 100 academic papers, including more than 30 EI articles, which has provided strong support for the teaching and development of microelectronics specialty.
Trial teaching
The department attaches great importance to teaching practice and has four professional laboratories: microelectronics technology laboratory, integrated circuit design laboratory, FPGA laboratory and layout design laboratory. We have also established an off-campus practice base with Aerospace 77 1 Research Institute and Tianshui Tianguang Semiconductor Co., Ltd. to let students know the production, manufacturing, testing and packaging technology of integrated circuits on the spot.
Employment direction
Students are mainly engaged in the design, testing, manufacturing and teaching of various semiconductor devices, large-scale integrated circuits and integrated circuit systems in microelectronics and related fields, with a one-time employment rate of over 95%. Basic profile
The professional basic course department was established in June 2002, and its predecessor was the electrician teaching and research department. Mainly undertake the basic courses of the whole school: the circuit of electrical specialty, the circuit analysis foundation of communication and computer specialty, electrotechnics of non-electrical specialty, etc. Actively explore teaching reforms such as bilingual teaching of circuits and multimedia teaching of electrotechnics, and successively build two excellent courses of circuits and electrotechnics.
teacher
Full-time teachers 12, including 2 professors, 7 associate professors 1 person and 7 lecturers. Doctor 1 person, mostly young and middle-aged teachers, and the teaching echelon structure is reasonable.
Professional basic course teachers actively carry out scientific research and technology development, and constantly improve the teaching level. In recent five years, * * * has published 3 textbooks, 78 academic papers, 29 above the core, 8 EI searches and 3 ISTP searches. Undertaking vertical and horizontal scientific research projects 12 (National 863 Project 1 2, provincial and ministerial projects), and winning the second and third prizes of Shaanxi Science and Technology Progress Award 1, patents 1, and Shaanxi University Science and Technology Award 1.
Trial teaching
Professional basic courses attach importance to teaching practice, equipped with special circuit laboratories, and some experimental courses adopt students' independent experiments to improve the experimental effect.