Time goes forward step by step on the annual ring, and a period of work has ended. What do you think of the work achievements since this period of time? Gather your past achievements into a work summary. Are you still worried about writing a work summary? The following are the short articles (generally 5 articles) of technicians' work summary compiled by me. Welcome to reading. I hope you will like it.
Summary of Technician's Work 1 Time flies, and xx years have passed quietly. In the past year, with the support of the company's project leaders and the help of my colleagues, I earnestly performed my duties, strengthened the management of construction production, focused on improving my own quality, guided by the "Ten Systems" and "Five-Year Innovation" of the head office, improved the team's construction technology, supported the party organization to do a good job in ideological and political work, and strengthened my moral cultivation, so that my ideological quality and work level were continuously improved, and the construction production assigned by the project was successfully completed. The work of the past year is summarized as follows.
I. Work aspects
I have been engaged in the technical post of construction team for xx years, mainly responsible for the technology and quality of the team, and cooperate with the team leader to do the team work well. Since the beginning of the year, it has participated in the aid construction of Sichuan xx project, xxxx road reconstruction project and xx pavement project. Xx project is a political project with short construction period, large quantities, complex terrain, inconvenient transportation, slow progress of subgrade construction and insufficient cushion construction sections. However, in order to ensure the smooth completion of the construction period, under the special conditions of complex environment and difficult construction, our team adopted subsection construction, and the subgrade was submitted section by section, which ensured the construction progress, although the mobilization was frequent and the staff worked hard. In terms of quality, we adhere to the construction quality inspection system and strictly implement the "self-inspection, mutual inspection and handover inspection" system, so that quality problems can be effectively controlled in the construction of each working procedure and site management can be strengthened. Despite the shortage of materials, the quality requirements for materials entering the site have not been reduced, and any unqualified materials are refused to enter the site. Strictly control the construction progress, make clear the construction task quantity, and check the material cost first, which will not affect the quality, which is beneficial to the geometric size of our gravel cushion, and carry out strict sampling inspection on the incoming materials to prevent' running, running, dripping and leaking'. Every day, compare the engineering quantity completed on the same day with the accounting, find out the reasons for the shortage, lay a good foundation for controlling the material cost in the next step, report and summarize the task quantity of each completed section, analyze the existing problems, find out the deficiencies, earnestly implement them and improve them in time.
In the xx project, due to the influence of the weather and changes in the early stage, the project progress lags behind and the engineering quantity is large in the later stage. In order to ensure the smooth completion of the construction period, Liu Jingli of the company led three government officials to our construction line to provide service guidance and help. The construction team works in two shifts, 24 hours a day, and eats three meals on the road. After more than a month of intense construction, it was successfully completed within the time limit required by the owner. In the tense construction process, we can always implement the rules and regulations of the head office and cost management.
Second, the ideological aspect.
Over the past year, I have been studying and trying to improve my ideological and political quality and professional level. Seriously study the management systems of the Head Office, and deeply understand the spirit of important meetings and documents issued by the Head Office. Combined with practical work, we should learn various professional knowledge in a targeted way, on the one hand, we should seriously study the current norms and technical standards related to this major; On the other hand, strengthen study in practice, consult experienced old colleagues and supervision units with an open mind, and constantly improve their professional level.
Three. Xx year work plan
In xx, I will be responsible for receiving the materials from the mixing station in xx pavement project of the head office. First of all, I will lead the team to do a good job of weighing, perform their duties based on their posts, strictly weigh the quantity of incoming materials, and put an end to all' running, running, dripping and leaking'. Do a good job in sampling inspection of vehicles and trucks in terms of quality, put an end to any unqualified materials entering the site, fill in the receipt and daily report accurately and report them to ministry of materials and equipment in time. Keep in touch with the engineering department and quality inspection department at any time, control the overall materials of the project, and prevent single materials from entering more and leaving less.
As young technicians, we should carry forward the fine traditions of "passing on", "helping" and "leading" in the four companies, not only passing on, helping and bringing up the newly graduated students, but also caring and helping them in life. Let them feel at home in our company.
In terms of unity and cooperation and improving team spirit, we should respect leaders and colleagues, and we should be able to coordinate the relationship between colleagues. Strengthen the sense of responsibility, individuals obey the organization, subordinates obey their superiors, do not act arbitrarily, and listen to different opinions with an open mind. Treat people sincerely, be fair and dare to take responsibility.
Fourth, rational recommendation.
It is expected that the new responsibilities of the Head Office can be formulated and implemented as soon as possible. Let each of us work according to our own responsibilities, and whoever does things can avoid the phenomenon of buck passing.
Five, their own shortcomings and corrective measures
Generally speaking, communication with leaders and colleagues is insufficient, and management potential and work efficiency need to be further improved. In the future, we should exchange more information with colleagues on work, study and thoughts, so as to encourage each other, help each other and improve together. Spend more time studying and thinking.
The above is a summary of my work in the past year. Although some gains have been made in construction management, I still feel that there is a necessary gap between the company's requirements for upper management. In the future work, I will try my best to do my own job and do my bit for the future of the project and the company!
Summary of Technician's Work 2 For me personally, xx is a year of comprehensive progress in my professional skills. In the past year, as a technical cadre with engineering construction experience, I partially or fully participated in the technical work of several construction teams specializing in steam turbines. It is in this busy and fulfilling year that under the unique conditions of Ludian Power Engineering, on the one hand, I tested my original engineering knowledge and further deepened it, on the other hand, I initially built my own professional knowledge system.
I. Overview of work
The technical work that I am personally responsible for in the whole xx year can be roughly divided into several time periods from the key points of the phased construction of the project.
At the beginning of the Spring Festival in xx, I was the only technical cadre of the whole steam turbine group because Haikou and Baima projects were in the critical period of construction. As the only technical cadre of steam turbine team, I am responsible for the technical work of all teams in steam turbine specialty. At the same time, the preparation plan of more than 60 sets of construction drawings of all 2 1 large systems in steam turbine specialty is also a time-pressing, huge and extremely important work.
Since August, my technical tasks have been gradually stripped off. In early September, all the tasks of Pipeline Class II were delivered to the newly transferred technical cadres from other places, and the tasks were reduced. From June 5438 to this year 10, I began to take over the installation technical tasks of two steam-driven feed pumps, and my professional skills entered a new stage in dealing with the new tasks. So far, my work focuses on the installation of two steam-driven feed pumps, the installation of temporary steam pipeline purging and the improvement of all steam-water pipeline systems responsible for the first-class pipeline construction.
Second, the work summary
In the work of xx years, I have never been intimidated by dealing with a series of heavy construction tasks and unfamiliar technical work. I have always despised the engineering and technical work I am engaged in. After all, these works have mature construction experience to learn from, and there are many engineers and technicians like me who are engaged in this work together. But I take a cautious attitude in working methods and strategies, because I can accumulate and learn valuable experience from the working practice and details of these systems.
I regard every job given to me by the team leader as a valuable opportunity to accumulate personal work experience. Successfully completing the task is my only work goal, and trying to solve the construction problems is my only work attitude. I participated in every construction task that I was responsible for, and fully grasped the key points of the unit project and sub-project construction. Taking the installation of steel platform and circulating water pipe in the steam turbine room as an example, these two construction tasks were the earliest unit projects carried out by the steam turbine team. During the construction of these two projects, I often rush between the main workshop and the circulating water pipe trench to check the implementation of key points of the project and discuss with the construction team leader to solve the construction difficulties. It is because I really put myself into the project construction process that I have mastered a series of construction points, such as span and verticality of steel platform columns, installation elevation control of steel column joints, connection quality control, installation quality control of circulating water pipes and so on.
As an employee of a modern large-scale enterprise, as an engineer and technician in a new era, I not only work hard, but also constantly sum up my progress. The conventional construction technology has long been firmly in my mind, and the new problems and difficulties encountered in the construction process are the focus of my summary. When the project is busiest, it is impossible to solve everything on the same day every day, so I will classify these things and deal with them in a planned way. Because my only project construction experience before Luzhou project was Panzhihua 135mw project, I had insufficient work experience and encountered many problems. I corrected all my shortcomings and mistakes in time, but I adopted the method of dealing with the fait accompli, analyzed the reasons from my shortcomings and mistakes, summed up the experience and lessons, and made them my wealth.
In addition to technical work, I also hold positions in the general branch and installation branch of the engineering project department, and I am also the person in charge of Qing 'an post of the steam turbine team. Participating in youth activities is always my safety. I participate in every activity of the Youth League Committee with my heart and perform my duties well in the activities of the Youth League Committee. In the youth activities, my only regret is that due to my busy work, I didn't carry out the activities of young workers in the steam turbine team as planned, and I didn't successfully complete the propaganda task on the steam turbine site in xx years. This is the failure of my project.
Three. abstract
I have always admired such a philosophical saying that a gentleman strives for self-improvement, and I have always demanded myself by the standards of an excellent engineer and technician, and I have also made progress because of this requirement. The glory of the company needs our efforts to create, and personal development needs our own efforts to achieve. For these lofty goals, I have been making unremitting efforts and striving hard. In the future work, I will continue to guard against arrogance and rashness, work hard, closely unite with everyone in the company's big family, realize the company's take-off with my brilliant youth, and write my own chapter with no regrets.
Technician's work summary 3 i. Safety
In the work of safety production, fully implement the safety measures and regulations of the group company and the company. In particular, the implementation of "two votes and three systems" reached 100%. In terms of equipment inspection, we have made great efforts to strengthen detailed inspection, constantly improve the reliability of equipment, and ensure the completion of various safety indicators issued by the company. Avoid personal injury, equipment damage, fire accidents, the impact on foreign network companies and major accidents caused by human responsibility. In safety study, we started weekly training to improve the team safety concept.
Second, the work.
Conscientious and responsible, dedicated, self-demanding, honest with others, practical work, obey the leadership arrangements, overcome various difficulties, and always treat the work with a positive and serious attitude. Especially in summer, the inspection of electrical equipment has been strengthened, and equipment defects have been handled in various high-temperature working environments in cooperation with maintenance, so as to ensure the normal operation parameters of XX specialty as much as possible. Although the number of major and minor repairs of the unit has increased in the middle of this year compared with previous years, the inspection and maintenance of the equipment have not been put down, and the inspection and maintenance are still carried out on time. Through hard work, we have made gratifying achievements. In this year's action, we successfully completed the task and got the affirmation and praise from the leaders.
Third, professional technology.
Study hard in technology, review the operating rules in theory every day, and constantly improve your skills through various communication channels in team learning; In practice, strictly abide by the operating rules, cultivate the individual's independent operating ability, ensure that misoperation accidents do not occur, write down the problems encountered in work, experience gained and matters needing attention at any time, consult with specialized workers and leaders with an open mind, knowing that it takes time to hone and accumulate knowledge, and it is getting stronger step by step.
Fourth, the ability to work
Ability includes coordination ability and accident handling ability. If "technology" is compared to "IQ", then "ability" can be compared to "emotional intelligence", and so can XX major. A high IQ does not necessarily mean a high EQ, because technology is dead and ability is alive. In all kinds of unexpected accidents, our team United and dealt with them decisively, nipping the accidents in the bud and minimizing the unexpected events. Therefore, quick and accurate judgment ability and flexible learning and application can do better.
Next year will be a year of development and maturity. Although I have made some achievements in my work and made a new breakthrough in technology through the overhaul of units in the factory, I will not give up the pace of innovation because of my achievements. We will continue to work hard and make our due contribution to tomorrow.
Summary of Technician's Work 4 xx years ago, I walked out of Nanyou with professional stationery and finally graduated. 1October 20th,110, I started my first job: xx County Communication Branch. In the company, I am mainly responsible for exchange maintenance. Soon after, with the approval of the superior leader, I passed the technical examination and was fortunate to be hired as an exchange maintenance technician. I have held this position for four years now. I want to sum up my work in recent years and ask the company leaders to give me an appraisal and audit.
First, seriously study technical business and master equipment maintenance skills.
I worked as a program-controlled switchboard repairman in xx from xx to xx. This is also my first job since I joined the work. In fact, xx's equipment maintenance is mainly based on exchange equipment, including the comprehensive maintenance of local telephone measurement, power supply, transmission, oil engine and other equipment. In the comprehensive maintenance work, we always adhere to the principle of "integrating theory with practice", learn while using, and constantly improve professional maintenance skills.
As the saying goes, "if a worker wants to do a good job, he must sharpen his tools first." In the study of professional technology theory, the principle of combining internal and external is adopted, with self-study as the main part and company training as the supplement. After all, the time to go out for training is extremely limited. Over the past few years, I have been studying continuously and played an effective guiding role in practical work.
Confucius said, "In a threesome, there must be a teacher." . Therefore, in practical work, I strongly recommend formalism. I have always been modest and prudent, and I am not arrogant or impetuous. When you encounter obstacles that you can't handle, you will ask experienced experts in time, not only to resume normal communication in time, but also to learn technical skills. In a few years, I have mastered the operation of local data and user data of switches; Have a further understanding of the performance of sdh equipment; Have a deep understanding of the working principle of power supply equipment; Accumulated the necessary maintenance experience of isdn, broadband equipment and terminals, and removed terminal obstacles for isdn and broadband users for more than 200 times. In addition, in many large-scale cutovers, the tasks assigned by superiors were successfully completed.
Second, strive to forge ahead and strive to develop in the direction of technical management.
Xx year 10 month, due to work needs, transferred to the county company to be responsible for the improvement of the computer room environment and the maintenance of exchange equipment. The change from technical post to technical management post has set a new and higher standard for me, and also created a good opportunity for the improvement of comprehensive quality.
For comprehensive work, I plan my time reasonably and make overall arrangements to ensure that all the work does not fall behind. Personality in the improvement of the computer room environment, I took the relevant requirements of the municipal company as the standard, worked hard from the details, cooperated with the construction and maintenance departments, and achieved good results. In the previous safety inspection, the municipal company affirmed and pointed out the shortcomings. In this regard, I carefully summarized and completed the rectification in time.
I sometimes feel a lot of pressure and I don't have enough knowledge. Therefore, I use every minute after work to learn all aspects of relationship work. With the accumulation of knowledge and experience, I can handle my work easily.
But there is still a big gap from the requirements of generalists. However, I believe that continuous efforts will always have an effect.
Life is long, and I will devote my whole life to this job I love and make my greatest contribution to the company.
Summary of Technician's Work 5 20xx65438+February, with the approval of Changzhou Education Bureau, Wang Yun Qingming Teachers' Studio of Electromechanical Technology in Changzhou Secondary Vocational School was established. Through half a year's work, we have basically achieved the predetermined goals and made breakthrough progress in some aspects.
First, pay close attention to key work and highlight the "leading" effect of the studio.
In the first half of 20xx, all members of the studio actively participated in the major construction work of the national secondary vocational education reform and development demonstration school, and made great achievements, showing the leading effect of the studio.
1. Focus on promoting the reform of the talent training mode of "school-enterprise cooperation and work-study combination".
In the first half of 20xx, the training base management organization jointly established by the school and the cooperative enterprise * * * was established, and the CNC technology application professional construction committee composed of studio members as the backbone and enterprise professional and technical personnel * * * was established, and 1 1 off-campus training base was jointly established with relevant enterprises.
Relying on the studio and professional training base, the construction scheme of "R&D production-education integration department" for NC technology application specialty is completed, which provides a platform for improving the connotation of R&D school-enterprise cooperation, further improving the professional construction level and enhancing the ability of service enterprises. Combined with teaching practice, technical transformation, product development and process innovation are carried out for enterprises.
Two construction schemes of "factory lieutenant colonel" have been compiled and completed, and the management mechanism of "factory lieutenant colonel" has been explored, so as to actively play its role in cultivating the professional quality of school students.
Completed the investigation of relevant enterprises and signed relevant training agreements with relevant enterprises. Referring to the training operation mechanism of "famous classes" of pump electromechanical specialty in China, the connotation and mechanism of specialized order training for CNC technology application specialty were explored.
2. Focus on building a professional curriculum system with "thick foundation, flexible modules and strong practice".
In the first half of the year, all the staff of the studio actively participated in the construction of the professional curriculum system of "thick foundation, flexible module and strong practice". Participated in the development of courses such as mechanical drawing and CAD, measurement technology, mechanical manufacturing technology, mechanical design basis, machine tool numerical control technology, CAD/CAM technology, numerical control turning technology training, numerical control milling technology training, electrical installation of numerical control machine tools, and mechanical installation of numerical control machine tools. Participated in the course construction and resource base construction of the provincial cooperation group, in which Wang Yunqing, the head of the studio, presided over the development of a course of Mechanical Drawing and CAD, and all the staff participated in the development of five courses: Measurement Technology, CAD/CAM Technology, CNC Milling Technology Training, Electrical Installation of CNC Machine Tools and Mechanical Installation of CNC Machine Tools.
At the same time, the studio members have completed the hydraulic and pneumatic project courses and the mechanical drawing selection question bank, which have been officially published. At present, we are actively preparing for the development of school-based excellent course "CNC Milling Center Project Course" and school-based teaching materials "CNC car project course-Fanuc system", "CNC machine tool mechanical assembly and debugging", "CNC machine tool electrical and maintenance" and "mechanical drawing and CAD course integration". Actively do a good job in compiling the school-based handout of Modern Processing and Measurement Technology.
3. Basically form the teaching evaluation mode of "teaching, learning and doing in one" and the evaluation system of "five in one".
Based on the studio construction, the first draft of the practical teaching plan of the NC technology application professional project "teaching and doing" has been formed and started to be tried out; Modularization of some courses has been completed. Relying on the products of local enterprises as the project carrier, the integration of theory and practice, project teaching, simulation teaching, virtual teaching, simulation teaching and on-the-job teaching is implemented, and the teaching mode of "teaching, learning and doing as one" is constructed. The proportion of combining theory with practice in professional teaching has reached more than 60%. Project teaching course and theory-practice integration course are under construction. The first draft of the evaluation method of "teaching-doing" in seven aspects, such as the evaluation system of work-study combination learning quality, classroom teaching evaluation system, student internship evaluation system, "integrating theory with practice" evaluation system, productive training evaluation system, subject learning quality weekly evaluation table and project teaching quality evaluation system, was initially formed, and began to be tried out. Completed the scheme of diversified evaluation mechanism, and completed the course assignment and professional comprehensive quality evaluation assignment.
4. Support the construction of practical teaching environment.
Combined with the construction of the training base of CNC technology application specialty in the "third phase project" of the school, the studio members completed the reconstruction plan of the CNC machine tool disassembly training room and the construction plan of the advanced manufacturing process room; Basically complete the lathe transformation of CNC lathe room; The construction of training tools and experimental supplies information management system has been completed. The research plan of the new off-campus practice base has been completed, and the specific new off-campus practice base has identified relevant enterprises as backup.
Second, attach importance to the development of members and give play to the "promotion" function of the studio.
1, pay close attention to classroom teaching and promote teaching reform.
In the first half of 20xx, members of the studio set up five public classes, some of which were lectures for young teachers, some were research courses for backbone teachers, and some were demonstration courses for backbone teachers. Combined with the characteristics of this major and the requirements of current curriculum reform, these courses are mainly integration of theory and practice and project-based courses.
At the same time, the studio requires all members to actively participate in the activities of "five courses teaching and research and two courses evaluation" in provinces and cities, so as to improve the classroom teaching and research ability and level of studio members, promote the teaching quality of vocational schools and promote the professional growth of teachers. For example, Teacher Zhao Jinmeng won the third prize in the evaluation of two courses in Changzhou.
2. Create a strong atmosphere and actively participate in research.
It is necessary for teachers' professional growth and solving practical problems in education and teaching to carry out subject research, which is conducive to teachers' rigorous work style and awareness of educational research. Therefore, the studio encourages all members to actively participate in research and promote self-development through research.
3. Constantly reflect and summarize, and write educational and teaching papers.
Because of the hard work of the studio members this year, there are many feelings and sentiments. When they have a little leisure time, they constantly reflect on and summarize their experiences and put them into words. On 20 14, many papers were awarded or published by studio members. The following are papers published by members related to studio work.
4. Keep learning professional theories and strive to improve the professional level of members.
In the first half of the year, the studio regularly organized members to study professional theory, constantly absorbing professional frontier knowledge and new teaching concepts, improving the professional theoretical literacy of all members of the studio and laying a solid theoretical foundation for the education and teaching research of the studio. Organize a special study with full participation once a month. Studio members study 1 ~ 2 theoretical monographs every year, write well their reading experience and improve their teaching and research ability. This year, the studio held two hot and difficult lectures on vocational education.
5. Actively participate in training and explore the training rules of professional teachers.
In the first half of the year, the studio adhered to the concept of promoting school development by teacher development and promoting students' development by teacher development, actively explored the law of professional teachers' growth and training, and realized the combination of overseas training and domestic training, off-campus training and on-campus training, and professional training and enterprise practice. According to the teacher training task of each school, the training of studio members at all levels has been successfully completed.
6. Take two competitions as the starting point to improve the practical ability of members.
It is an effective way to test teachers' practical ability and skill level to participate in and guide students to participate in skill competitions, and to guide students to complete innovative works and participate in innovation competitions. In order to improve the ability of studio members and further highlight the effect of studio teachers, in the first half of the year, the studio participated in relevant skills competitions and innovative work training for members, including skills training and innovative thinking training, and achieved satisfactory results.
7, improve the cultural level, participate in all kinds of selection, accelerate growth.
According to the requirements of each school, the proportion of graduate students of professional teachers in this school should reach more than 15%. To this end, the studio requires all members to actively apply for in-service graduate students to improve their academic level. Through hard work, two teachers, Zhou Wei and Zhao Jinmeng, were admitted to the on-the-job graduate students of Jiangsu University. At the same time, all members are encouraged to actively participate in the eighth batch of four types of excellent teachers' selection activities in liyang city, find out the shortcomings by comparing the standards of excellent teachers, clarify the direction of future efforts, and accelerate the growth of teachers, especially young teachers.
Third, complete the assault work and highlight the "attack" ability of the studio.
In the first half of the year, in the process of applying for brand specialty and characteristic specialty, applying for high-level training base, and building education informatization and national demonstration in Jiangsu Province, the studio asked members to seriously complete the surprise work as the backbone, collect and sort out the achievements of the studio and individuals, and successfully complete the tasks assigned by the school.
Looking back on half a year's studio work, we still need to further improve. This is mainly manifested in the following aspects: (1) The activity time of the studio is relatively tight, and some specific plans sometimes cannot be carried out as scheduled, resulting in some work not being fully implemented; There are differences in the level and research ability of studio members, which have an impact on the overall work; Due to geographical restrictions, it is difficult for studio members to engage in collective activities; How to guide the development direction of regional disciplines and effectively solve hot and difficult problems in teaching needs to be further strengthened. In order to better carry out the work of the famous teacher studio in the future, we should work hard in the following aspects:
1. Strengthen scientific planning and solve the contradiction between work and study.
The studio should clearly understand the development trend of education, grasp the current situation of education development, identify the training needs of teachers, and strengthen the scientific and forward-looking work plan; At the same time, it is necessary to reasonably arrange the content and time of activities, improve communication with school leaders, seek the understanding and support of school leaders, and properly handle the contradiction between work and study.
2. Innovate working methods and enhance the effectiveness of training.
The studio should fully learn from other people's work experience, innovate working methods, build an exercise platform, create opportunities for sharpening, and strengthen foreign exchanges. Through effective guidance and communication, help members internalize new ideas, new knowledge and new methods, further improve classroom teaching ability, curriculum development ability, teaching and research ability, practical guidance ability and activity organization ability, and further enhance the effectiveness of training.
;