Different wardrobes have different surface materials. The thickness of the wardrobe legs is required to reach 2.5 cm. If it is too thick, it will look awkward, and if it is too thin, it will easily bend and deform. Kitchen and bathroom cabinets can't use fiberboard, but plywood, because fiberboard will swell and be damaged when it meets water; The dining table should be washable. It is found that the wood has insect eyes and powder falling, which indicates that the drying is not complete. After checking the surface, open the cupboard door and drawer door to see if the contents are rotten. You can pinch it with your fingernails, which means that the contents have rotted. Smell it with your nose after opening the cupboard door. If you have a runny nose, glare or tears, it means that the formaldehyde content in the adhesive is too high, which will be harmful to human body.
Are the four legs of the wardrobe flat?
Whether the four feet of the wardrobe are flat or not, just shake the wardrobe on the flat ground. Some wardrobes only have three legs to land, and the stability is definitely not good. Also see if the desktop is straight, and it can't bow back or collapse. If the desktop is raised, the glass plate will rotate when placed; If the desktop is concave, when you put pressure on it, the glass plate will break. In addition, we should also pay attention to check the cupboard door, the parting of the drawer should not be too large, and we should pay attention to the horizontal and vertical firmness, and the door should not be sunken.
Is the wardrobe structurally sound?
Small wardrobe, such as chairs, stools, clothes hangers, etc. When selected, it can be dragged on the concrete floor, and the sound is crisp, indicating that the quality is better; If the voice is hoarse and cracked, it means that the tenon and mortise are not closely combined and the structure is not firm. You can shake the table by hand to see if it is stable. You can sit on the sofa. If you sit on it, it will creak and shake. It's a manicure. It won't take long. Special note: Square table, bar table, chair and other legs should be fixed with four triangular clips. You can turn the tables and chairs upside down and touch them with your hands when choosing.
The seams of the veneer wardrobe are not tight.
Whether it is veneer, PVC or pre-coated paper, we should pay attention to whether the leather is flat, bulging, blistering and loosely spliced. It is necessary to check the flat-fell seam clearly in sufficient light. Fraxinus mandshurica veneer wardrobe is easily damaged and can only be used for two years. As far as wood veneer is concerned, shaved veneer is better than rotary veneer. The way to distinguish the two is to look at the wood grain. The wood grain of planed veneer is flat and dense, and the pattern of rotary veneer is sparse. The ground part of the wardrobe with particleboard veneer must be sealed, otherwise the side plate will absorb moisture and expand and be damaged. Generally, the corner of the veneer wardrobe is easy to tilt up, so you can dig the corner by hand when choosing. If you dig it out, it means there is something wrong with the glue.
Is the edge of the wardrobe flat?
Uneven edge sealing means that the inner material is wet and the edge sealing will fall off in a few days. The sealing edge should also be round, not straight and straight. The edges sealed with wooden strips are easy to get wet or crack. In a wardrobe covered with plywood, the edges are nailed down. Pay attention to whether the nail eye is flat and whether the color of the nail eye is consistent with other places. Usually, nail holes are sealed with putty. Pay attention to whether the putty bulges. If it bulges, it means it doesn't, and the putty will slowly fall out from the inside.