Question 2: What kind of handmade works can waste paper boxes be made of? Can be made into saving barrels (like a small house, with a roof and beautifully painted), trash cans, small shoe cabinets (neatly stacked and fixed), and small drawers (the kind that can be pulled). Wrap the lid of the carton (with transparent glue or cloth) as a storage box. . If it is a small carton, it can be made into a pen container and a small storage box. . . There are many more. Think about what is missing at home and try to make it. . . I hope Guilin Guangming Packaging can help you!
Question 3: What can a waste paper box do 1? DIY small jewelry box First, let's find an ordinary cardboard box. Then cut off the cover at one end. Find a piece of cardboard with similar hardness and make a drawer shape according to the length, width and height of the carton just now. It is less than the sum, and the total size depends on the thickness of the cardboard. Mine is a little thicker, so it's reduced by 0.5 cm. Just like when I was a child, I left an edge where I needed to paste it, so that I could paste it.
Red is long, blue is wide and green is high. ) Then cut out what you have drawn, and scratch it gently with a knife where you need to fold it, so it won't be difficult to lift it. Then fold it up and stick it on. If the glue doesn't stick well, you can use scotch tape. The most important thing is to be strong. Then put the finished paper box into the box made before, which is in the shape of a drawer. Wrap the exposed part of the box with wrapping paper. If you have patience, you can wrap it with cloth. Just like wrapping a book cover when I was a child, the more beautiful it is, the better. The general appearance of the drawer came out. Then make the handle of the drawer. Make two holes in the front of the drawer with an awl, which can be bigger. Put on a rope or ribbon and tie a knot in the drawer. Then use tape to stick the just-tied knot to the knot. So this drawer is finished! If it doesn't look good enough, you can add some decorations. Decoration and so on. You can play whatever you want. Such a small box can hold some small things like jewelry. You can also make several small drawers and put them together to make a small cabinet. 2. The biscuit box becomes a jewelry box. The finished mooncake box or biscuit box can be used to store jewelry, such as earrings, necklaces, etc., which is clear at a glance and convenient to take. Make romantic light boxes with CD boxes. We should protect the environment. In this issue, we will teach you how to make romantic light boxes with old CD boxes.
Warm-up action: let's check drawers, even pots and pans, and look for old CD boxes that are no longer used. Congratulations on finding the garbage bug in the box. You can move on to the next step. If you can't find it, keep looking or ask the generous third and fourth children next door for some.
Preparation tools: In addition to the CD box, you also need a meat cutter or scissors, ruler, packaging tape, decorative drawing paper (or friends who want to make photo frames can prepare photos of a certain size), a hot melt gun and a hot flux. ...
Step 1: First, cut out the decorative drawing paper (or photos) you prepared according to the cover size of the CD box.
Step 2: Insert the paper-cut into the surface of the CD box to make it look like the back cover and cover of the original CD. Then, as shown in the above figure, the two boxes are vertically butted, and the four joints are bonded with hot melt adhesive, and can be fixed after the glue is dry.
Step 3: Decorate the border above the box with glue and packaging tape.
Step 4: Then decorate the measuring edge. Wrap enough packaging tape around the light box, but don't cut it. Pay attention to fix it at the corner with glue, and at the same time press the part of the packaging tape that grows from step3 below, which is beautiful and firm.
Finally, enjoy the time: put a candlestick in it, turn off the lights and light candles, it's romantic ~
Question 4: What can waste paper boxes be used for?
Question 5: What can waste paper boxes be used for? Sell out the waste, recycle DIY storage boxes, deliver packages, and box things.
Question 6: What good-looking three-dimensional handiwork can waste paper boxes make? There are all kinds of three-dimensional handmade products for you to choose from. I hope my answer can help you!
Question 7: How to use the waste box at home? You can wrap the box with beautiful Bao Shu paper, and you can keep the box at home as a fashionable storage box.
Question 8: Empty cartons are used as storage boxes for waste generated by boxes.
Preparation materials: all kinds of empty cartons (such as cans, moon cakes, biscuit boxes, toothpaste boxes, etc. ), patterned wrapping paper, English newspaper, cardboard (used to increase the thickness inside).
A. The storage box made of tissue boxes is just the right size for storing old tapes and other sundries.
B, long toothpaste box, packed in English newspaper, can be used as a pen box with an inner box. Sewing buttons and sealing lines at the opening is a good sealing method.
C, add two drawers to a rectangular paper box, and use a long box of cosmetics as the inner box to make a jewelry box, which can hold earrings, necklaces and other small ornaments.
D, three empty aluminum foil bags, cut open the box mouth, clean them, dry them, and stick them together, which can be placed on the desktop as a stationery box. .
The unique jewelry box is handmade.
The unique jewelry box looks very creative and exquisite. Its predecessor is just a finished milk box!
Preparation materials: small milk box, beautiful wrapping paper, a small piece of paper rattan, pearl board, corrugated board.
1, cut the milk bottle mouth, and fold the four sides of the milk box into the above shape under pressure.
2. Cut the favorite wrapping paper into long strips and stick them on both sides.
3. Draw the size of the box mouth and cut out a square box.
The box cover is lined with the thickness of a pearl plate.
Empty cans of potato chips are used as storage cans and multi-purpose pen holders.
Materials needed to make this pen container: empty cans of potato chips and colored wrapping paper.
A, the upper part with plastic cover, sealed at the bottom and decorated, is an elegant storage tank.
B, the lower part was originally a complete cylindrical jar, which only needs to be packaged, that is, it became a pen container.
Handmade vertical shelves
Keep the original shape of the milk cartons and pile them into a vertical shelf.
Materials required for DIY production:
4 long milk cartons, wrapping paper and photo glue.
1. First, remove the bottom of the milk carton as the basic part of the shelf.
2. Cut the milk carton obliquely and fold it into a triangle, as shown in the figure.
3. The triangle of the finished product is used as the base of the shelf, which can make the whole body slightly inclined upwards, which is convenient for storing articles and does not scatter.
4. After the base and the three basic shapes are packaged, they are stacked and glued one by one, and you are done.
The production of creative CD stands has a natural, rough and original taste.
Materials to be prepared for making this creative work:
Corrugated cardboard (if the thickness is not enough, you can use two layers or add a layer of cardboard to increase the firmness) and branches of waste paper boxes.
Manual production method:
? Cut the corrugated cardboard with a width of about 37.5px on both sides at equal intervals, then insert branches to adjust the angle, and the CD rack can be completed.
? Insert the CD horizontally into the incisions on both sides, with the album title facing outwards, so as to make it easy to find.
Handmade bookshelf
Using these abandoned empty cartons and cartons to make a unique and practical manual book and newspaper rack looks good!
Handmade materials to be prepared:
Cartons or cartons (about the size of magazines, books and newspapers), calendars and English newspapers (for packaging)
1, cut out a simple and generous shape, and paste it in English newspaper packaging, which is a practical book and newspaper rack full of scholarly atmosphere.
2. On the diagonal of the carton, cut it into fan-shaped arcs, add recycled paper materials such as calendar paper, and decorate it slightly, and a durable and environmentally-friendly book and newspaper folder is completed.
Hand-made colorful and childlike animal storage boxes and lockers.
Materials needed to make this storage box: discarded cartons and decorative paper.
1, original waste paper box, preferably rectangular and thicker.
2. Cut the paper box into a trapezoid as the basic structure of the lion.
Add the lion's face, cut and paste it with paper, and outline the shape of the lion, and you can complete the work.
What the box looks like when it is opened.
You can also design a favorite animal model and create a lovely animal storage box.
Manufacturing method of environment-friendly gift box
The following is a very economical and environmentally friendly gift box.
Preparation materials:
Milk carton (long or small), wrapping paper, glue (or double-sided tape).
1. After removing the bottle mouth as shown in the line draft, draw a dotted line on the milk box.
2. Use a ruler to assist the blade and gently draw a crease on the broken line.
3, according to the original cut crease, pinch off the slope.
4. After folding the four oblique angles, fix them by rotating.
5. Spread the paper with your fingers and sort out the shape of the petals.
6. The folded shape is as shown in the figure, but it has not been completed until now. The purpose is just to fix the crease first, so that the shape is easy to fold after packaging and the shell will not wrinkle.
7. First expand the original folded shape ... >>
Question 9: What can the pulp in the waste paper box do? 1 Make recycled paper.
This is the most widely used method of waste paper. Making egg trays, industrial trays, firecrackers, etc. can be used not only to make recycled wrapping paper, but also to make recycled newsprint. A French paper company has successfully developed a new newsprint recycling process. This new process includes deinking, paper fiber purification, absorbing ink and impurities, and then making paper. The specific process is as follows: according to the type of ink, choose deinking technology; Sending paper fiber and soap deinking agent into a deinking chamber consisting of two chambers, so that ink and impurities float to the surface with foam and are sucked away by a suction device; Concentrate the purified fiber pulp to 15%, heat it to make the paper fiber expand, and bleach it to make the recycled paper glossy; Finally, the high-concentration pulp is sent to paper-making equipment, which can be made into recycled paper with the same whiteness as new paper.
2 production of phenolic resin
Japan's Prince Paper Company has successfully developed a new technology of dissolving waste paper in phenol to produce phenolic resin. Because phenol is combined with cellulose and hemicellulose with low molecular weight, the strength of phenolic resin is higher than that of products made of phenol and acetaldehyde, and the thermal deformation temperature is 65438 00℃ higher than that of previous phenolic resin.
In production, both old newspapers and office waste paper can be used as raw materials, but the cost of using office waste paper as raw materials is lower, only half of that of using old newspapers.
3 manufacturing household appliances
In Singapore and other places, people use old newspapers, old books and periodicals and other waste paper raw materials, roll them into round slender sticks, wrap them with plastic paper, and weave carpets, cushions, bags, cat nests, door curtains and even household appliances such as coffee tables and beds by hand. When making, you can weave different patterns according to the different shapes of various household appliances, and then decorate them with colors. The household appliances made in this way are both practical and beautiful.
4 press bonded paperboard
At the temperature of 80℃, the former Czechoslovakian scientists made a glued paperboard with five layers of waste paper and synthetic resin, and its compressive strength was more than twice that of ordinary paperboard. The packing box made of this glued cardboard can use nails and screws, and can also be equipped with load-bearing rollers. Its firmness is almost the same as that of plywood packaging boxes.
5 Molded asphalt corrugated board
The scientists and technicians of the Central Institute of Architecture in India used waste paper, cotton yarn ends, coconut fibers and asphalt as raw materials to mold a new building material, namely asphalt corrugated board. Building with this kind of asphalt corrugated board has the characteristics of good heat insulation, good water tightness, easy carrying, low cost, non-flammable and corrosion resistance.
6 methane recovery
Experts from Lundao University in Sweden beat waste paper into pulp, and then added anaerobic microbial water solution which can decompose organic matter into the pulp; Then moved into a reaction furnace, where cellulose, methanol and carbohydrates in the waste paper pulp are converted into methane; Then the wood extract is removed by enzyme, and the fuel methane can be obtained.
7. Improve soil quality
Some pastures in Alabama, USA, in some places, the soil is hardened and nothing grows. James, a soil expert in the state? According to the characteristic that waste paper will not rot quickly in the soil, Edwards mixed shredded waste paper and chicken manure with the original soil to improve the soil quality of the pasture. Its proportion is: paper scraps 40%, chicken manure 10%, and original soil 50%. In this way, waste paper can quickly rot and deteriorate under the action of basic fertilizer bacteria in chicken manure, making the soil soft and abnormal within 3 months, which is not only suitable for producing pasture and making pasture grow vigorously, but also can plant many crops such as soybeans, cotton, vegetables and so on, and the yield is quite high; At the same time, it will not have any side effects on the pasture. If new pieces of paper and chicken manure are added to these lands after two years, the soil will become more fertile and loose.
8 cultivate Pleurotus ostreatus
British scientific and technological personnel cultivated Pleurotus ostreatus with waste paper, and achieved high economic benefits. The specific method is as follows: the waste paper is processed into pieces, soaked in water for 72 hours to remove printed matter and dust, and then the small pieces of paper are scattered; Then, the waste paper and the cut Mayingdan are mixed according to the ratio of 1: 2, and put into a sterilized shallow wooden basin, the basin is generally 50×50× 15cm, and water and excess cellulose are supplied to the basin; After inoculation, cover the wooden basin with plastic film, put it in a culture room at 25℃, and after the mycelium develops for 34 days, remove the covering film and move it to a harvesting room at 20℃. After 20 days of growth, mushrooms can be picked. Generally, it can be harvested continuously for 4 months, and mushrooms can be harvested once per pot 1.5 kg.
Used as padding for livestock fences.
For a long time, people mostly used hay and saws as padding for livestock fences. But in recent years, the United States and western European countries have replaced it with waste paper. Following the cattle farm, pig farms and chicken farms in Britain also use waste paper as padding in their stalls. & gt
Question 10: How to use the waste paper box? 1. Prepare a packing box.
2. Cut the folded part at the bottom with a utility knife, leaving the upper cover. Stick it with tape after folding. The side of the box, leaving an edge part of about 3 cm, was dug out. Fix it in the box with freshly dug paper; Then use pieces of paper to make the feet of the box and fix them with a glue gun.
3. Handmade personalized lampshade of waste paper box Step 2. Cut a small hole in the bottom of the box, pass through the light bulb and fix it with a glue gun.
4. Handmade personalized lampshades are in the waste paper box in the third step. The basic frame has been completed, and now it's time to pack ~ I bought some punched paper in the market and can use it.
5. Hand-made personalized lampshades are in the fourth step of waste paper boxes. Maybe the light is not weak enough if perforated paper is used alone, so stick a circle of translucent paper first, and then stick perforated paper.
6. Handmade personalized lampshade is in the fifth step of waste paper box. Next, I began to decorate. I made two animal images with black paper and stuck them in two corners.