Current location - Education and Training Encyclopedia - University rankings - The easiest way to deal with moldy walls
The easiest way to deal with moldy walls
The simplest treatment of moldy walls is as follows: use a toothbrush, rinse with bleach and use alcohol.

1, use a toothbrush

If only a small part of the wall is moldy, you can use a toothbrush to remove the mold from the wall. If we want to prevent the mold from spreading further, we will clean it with a toothbrush and then wipe it on the wall with alcohol, which will dry the wall and prevent the mold from regenerating.

Step 2 clean with bleach

If the walls are moldy, they can also be cleaned with bleach. You can dilute the bleach with water and put it in a spray bottle, and then spray it on the mold on the wall, which will also clean the mold on the wall. If you don't want bleach to get on your hands, you'd better wipe the wall with cotton cloth.

Use alcohol

If the indoor walls are not very moldy, we can also clean the walls with alcohol. After diluting with alcohol and water, brush it on the moldy wall to remove the mold on the wall. However, it should be noted that when using alcohol to remove mold, you must avoid alcohol from touching yourself, and at the same time, it is best to ventilate after brushing alcohol on the wall.

Causes of water seepage and mildew in room walls

1. Rainwater infiltration: The joint between the window and the outdoor cement is wet and often moldy, because rainwater enters the room through the gap.

2, decoration: interior decoration materials contain a certain nutrient base, such as white contains a certain amount of cellulose, the sugar in cellulose is easy to produce mold at a certain temperature and humidity; Before the wall is dry, the moisture is sealed on the wall, which will also lead to mold on the wall; Using inferior interior decoration materials is easy to produce mold at a certain temperature and humidity.

3. External wall construction: the external wall brick is not inlaid, and the brick joints are not filled or filled; Exterior wall mortar is not full and there is trachoma. Gap, forming a cold and hot bridge; The combination of wall and beam-column is not dense, resulting in cracks; Door and window installation foam filling is not dense and there are gaps. The local seepage of cracks in the external wall is also the cause of wet hair on the internal wall.