Current location - Education and Training Encyclopedia - University rankings - Practice students' self-summary.
Practice students' self-summary.
Model essay on practical students' self-summary (6 general articles)

Self-summary is an individual's self-summary of his study or work life for a period of time, which can help us find the rules in study and work. Therefore, we should write a self-summary. How to pay attention to self-summary? The following is my collection of practical students' self-summary essays (generally 7 articles), which are welcome for your reference and I hope to be helpful to you.

Trainee self-summary 1 year flies, and has been employed for half a year. At first, I studied in the welding workshop, then went to Zengcheng No.2 Factory for support, and then returned to the assembly workshop of No.1 Factory for study. Now I am assigned to wea class in the welding workshop. Looking back on the course of the past six months, I was deeply impressed. The knowledge in books is only superficial, and further practical study requires me to accumulate experience continuously. During the half-year study, I realized the importance of the following points:

1, communication

Every link in the production site is a link, and every post needs communication to convey production information. If there is a problem in a post, the on-site personnel choose to deal with it by themselves, without timely feedback to the team leader, which will easily lead to abnormal situations and unimaginable consequences. Only by doing a good job of communication can we ensure the smooth progress of the work.

2. Work attitude

Attitude determines everything, and what attitude determines what work efficiency. Every post needs to have a sense of responsibility, operate according to the requirements of the operation specification, and do things with a muddle-along attitude, which will inevitably lead to anomalies. At work, you should actively consult experienced colleagues, have a sense of improvement, find problems with your heart and tell team leaders to find solutions together.

3. The direction of future work

As a college student, we should not only be familiar with the workflow of each post in the team and be competent for the post work, but more importantly, we should cultivate to be a manager with the potential to deal with on-site problems and master management methods and various work skills and tools.

4. Security issues

Safe production must be safe production. On-site personnel must operate in strict accordance with the operation specification and wear corresponding labor protection articles to protect their own safety. In addition, there are many vehicles and equipment in the workshop, so don't hurt others by rough operation.

When I first entered the welding workshop, the environment at the scene was worse than I expected. Noise, dust, smell and parts are big and heavy, so I am basically not used to manual labor. Over the past six months, through continuous learning, I have mastered the business processes of various positions, contacted a variety of working methods and tools, experienced the hard work of field personnel, and found that I still have many shortcomings. I look forward to accumulating experience in the future, finding problems with keen eyes, solving problems with flexible thinking, and contributing to the future development of the company!

Self-summary of trainees 2 The erp training in just one week is over. During the five-day training, we will simulate the operation of a production enterprise. After this training, I gained a lot. I found that if a company wants to operate well, it is very important to communicate between departments and predict all aspects of the company in the coming year. I directly or indirectly participated in the operation of the whole company, such as: analyzing the market, formulating strategies, marketing strategies, organizing production, financial management and a series of activities. Among them, I learned a lot of knowledge that I didn't have in books, which broadened my horizons and made me understand the difficulty of running a company. I also learned about the operation of some companies before I joined the work, which is of great help to my future work practice.

First of all, the teacher divided us into six groups and formed six companies. My company is Company D, and the teacher also explained the operation rules to us and led us to simulate the operation for one year. Then, according to the teacher's arrangement, several groups of us began to discuss the positions that each member should simulate in the company. After discussion, we arranged the post according to our own wishes. I am the production director. Mainly responsible for the company's product production, product research and development, as well as some production changes in the factory, production lines and so on. Then communicate with the sales director about the total production capacity of the production line, so as to get a better order suitable for enterprise production, communicate with the financial director about the cost required for production, report the cost I need, and communicate with the purchasing director about the production quantity required for products, so that the purchasing director can do a good job in material procurement. After a week's training, I found that the production director must make a good forecast of product output, so as to ensure the good operation of the company.

Erp practice has given us a platform to display our talents and taught us how to do things correctly and what is right. Here I not only deeply feel the complexity and variability of the business environment. Scientific and flexible decision. Integrity, coordination and effectiveness of enterprise management, understand and experience the process of enterprise management activities, main business processes and their interrelationships, promote the integration and mastery of knowledge, truly feel success and failure, and experience the significance of competition consciousness, team spirit and professionalism. Enterprise operation simulation practice can improve our comprehensive quality, cultivate and improve students' practical ability, practical problem solving ability, communication ability and coordination ability, so that I can accumulate indirect work experience and lay a solid foundation for practical work after graduation.

Through the careful guidance of the instructor, the assistance of colleagues and our own efforts, we have made some achievements in this internship, and I have a deeper understanding of the management of the enterprise. As the leader of an enterprise, we should take the overall situation into consideration, establish the overall concept, accurately understand the changes in the market, strive for the largest market share, strengthen the study of professional knowledge, and improve our professional quality and ability. At the same time, we need a high-performance management team to participate in the fierce market competition. This internship, I learned a lot, mainly including the following aspects:

1. Conduct effective market research, analyze the market and make correct decisions.

Know yourself and yourself, the market is ever-changing, and enterprises may encounter various risks in the process of operation. Therefore, only by conducting market research and fully understanding, analyzing and judging market data and information can we make a correct market strategic plan.

2. An excellent and united management team has been formed.

In the erp sand table simulation confrontation, we will fully feel the importance of teamwork spirit. Every enterprise should be bigger and stronger, not by one person's efforts, but by the strength of the team and the collective wisdom. Any achievement is the crystallization of collective wisdom.

3. Improve the rigor of thinking.

When making a production plan, in order to minimize the production cost and maximize the company's profit, there are many issues to be considered, such as: first, whether the order signed by the marketing department can be completed, but also whether the production equipment is leased or purchased, whether the raw materials are sufficient, whether the liquidity is sufficient, whether there are enough people to carry out production, etc. And when making a plan, you must not only consider your own plan. Moreover, we should take into account the problems encountered by other departments in planning, do not act according to our own subjective judgment, but act according to objective facts and laws, and conscientiously do every step.

4. Through practical production and hands-on operation, I have exercised myself and improved my ability and rigor of thinking.

When doing every business, we have made a serious analysis and discussion. In order to realize the company's profit, we must first consider whether we have the ability to complete market orders, whether we have the ability to complete certified R&D products, whether we have enough liquidity and whether we have loans. When making a production plan, we should not only consider ourselves, but also consider the difficulties encountered by other departments in planning, which requires us to establish a global concept and consider the problems comprehensively and meticulously, which requires correct decisions and decisions. Facts have proved that our decision is correct. In the next few years of production, we gradually realized profitability, and our ideas have also been effectively exercised in this respect.

Although our company went bankrupt in the fourth year of this training operation, we were not discouraged. In the fifth year, we still insisted on operating, hoping to recover a little loss of the company, and we began to see a turning point. Although our company's operation is not very successful, I think we have learned more because of the bankruptcy of the company, because we will find many loopholes in the company's operation, which are small details that well-run companies have not found, and we can also find that we often make mistakes there. I think only if we fail can we succeed better, because we learn more in the process of failure. Although the simulation training has ended, there are still many problems left for us to think about. In the future study and work, we should learn from the valuable experience gained in this training, constantly enrich and improve our theoretical knowledge, and at the same time participate in practice and take the marketing road of life! Facing the cruelty of the market and the business risks of enterprises is not only a problem that an enterprise may face, but also a choice problem that will appear constantly in life.

Practical students' self-summary III. The school only arranged an internship for us for one week. In this week, it can be said that most students can't finish the task on time. Training instructions have been issued for a long time, and we all had drawings before, so we can finish the task on schedule.

The week-long AutoCAD is finally over, which makes me suffocate! There is no class every day. When I get up, I go to the computer room to draw pictures. Back to the dormitory, I still paint. It can be said that I have been doing the same thing this week except eating, drinking and drawing by Lazar. It is no exaggeration to say that I even dream of drawing … but the effect is obvious!

The purpose of training is to enable us to skillfully use AutoCAD's common drawing commands and editing commands, and to cultivate students' skills and skills in drawing plane graphics with AutoCAD software. Consolidate the basic knowledge and methods of drawing professional drawings and relevant national standards, and cultivate students' methods and skills of drawing professional drawings with AutoCAD software. Cultivate students' patient and meticulous work style and serious work attitude.

Through this training, I dare not say that I have mastered the use of drawing commands and editing commands commonly used in AutoCAD, but it has been greatly improved compared with before training. Obviously, the speed is fast, the same type of drawings can be completed in less time, and the quality is only high or not. But the most skilled is the basic settings, such as layer, line type, line width, proportion, color, text style, dimension and so on. In order to strengthen this practice, I draw a picture frame for each picture and set the layer, line type, line width, color, text style and label style once. The proportions of architectural figures and geometric figures are different. After drawing a standard A3 drawing, it will be enlarged by 100 times. There are also labeling styles of various geometric figures, especially some diameters and radii, which are different from the conventional ones. Those who have never been exposed before have learned how to set them in practice. Fortunately, there are two kinds of font labels, but some pictures are a little messy, and if you pull the pictures set by your computer to the computer in the computer room, the fonts will become more messy and can't be displayed directly, so you have to reset them. It's okay, just change it. Or I'll cry. I won't even cry.

The school only arranged for us to practice for one week, and during this week, it can be said that most students could not finish the task on time. Training instructions have been issued for a long time, and we all had drawings before, so we can finish the task on schedule. This time, everything can be done except the last few pictures, which are relatively difficult. Water tries to suffocate me, which involves a lot of data, some of which have to be calculated by myself. When I first came into contact, I spent a day drawing only one, but fortunately I drew it before the training week. The training week mainly draws architectural drawings and geometric drawings. I had a headache when reading architectural drawings before, because there were a lot of data, but after the baptism of hydraulic drawings, I was very calm about architectural drawings. Although it has a lot of data, as long as it is step by step, there will be no big mistakes. However, at the beginning, I was not proficient enough and suffered a little. However, after learning a lesson from a pit, I can handle it calmly, and I can easily handle the exam on Thursday.

We are specialized in road and bridge engineering technology, and we need patience and meticulous work style and serious work attitude for this job. The workers' work is done according to the drawings. If the drawings are wrong, the work results are also wrong. Besides, it's a thousand miles away. If the accident is a big event, I must be careful.

Through practical training, I also feel the pressure of employment. Our training charts are all copied, and they are all drawn by predecessors with reference to physical objects or field trips, instead of just following the charts like us. If we do it, can we do it? My answer is no, we are not competent at present, because this is not just drawing a picture, but also calculating. We need to use the knowledge of other disciplines, such as building mechanics, to calculate a reasonable structure with building mechanics and then draw it on the picture. And my architectural mechanics can be said to be terrible. How should I face it? There is still more than a year before we go out to work. What can we come up with to let the recruitment company admit us, or ask ourselves, are we qualified for this job? Can your job afford that salary?

This time, apart from the hydraulic diagram, it seems that it has nothing to do with our major. Students all think it is a waste of time to draw these things that have nothing to do with our major. Now I know how to learn to run if you can't walk! The drawing training is relatively basic, which is very suitable for us at this stage. Don't criticize the courses arranged by the school too much, because the teachers in the school are older than you after all, and their majors are just not as good as ours at this stage. Everything happens for a reason! This arrangement is so that we can find jobs in a few years. Because we didn't know these things when we were divorced from society, teachers guided us forward as experienced people. Thank you teachers.

This training not only made me master the application of AutoCAD, but also made me wake up and follow the teacher, right!

In the internship, I strictly follow the training procedures. As a fledgling college student, I will not relax my demands on myself. I hope that every task in the future can be treated with the original enthusiasm for learning. During this period of training, although I often feel bitter and tired, I have fun in suffering and happiness in being tired, and I have also shown great efforts and seriousness. The main content of this training is machine maintenance, but I have benefited a lot and felt a lot. What I feel most is as follows:

First, training is a test of an individual's comprehensive ability. If you want to finish your work well, you need not only profound basic knowledge of office, but also certain practical ability, operational ability, ability to deal with unexpected faults and proficiency in common office software. As a staff member, you also need to have strong expression skills, and be good at guiding yourself to think and adjusting the atmosphere of getting along with others. In addition, you should have strong adaptability, organizational management ability and strong perseverance.

Secondly, this training, I deeply realized the importance of accumulating knowledge. As the saying goes, if you give students a bowl of water, you have to have a bucket of water. I was deeply moved by this sentence. Office, I used to feel very easy to operate, but when my master asked me to complete a product statistics data and records, I was at a loss, feeling completely different from what I usually learned in computer classes, which also made me feel ashamed. Because I always thought that learning these things well had little to do with my major, but I didn't know that my job was not to specialize in one aspect, but to examine our comprehensive knowledge level. This internship has enhanced my confidence and courage in graduation and employment.

Train students to summarize themselves. In a blink of an eye, the long-awaited training week is over. After two weeks of practical training, I learned a lot of knowledge. Looking back, I really gained a lot these days. Under the patient guidance and encouragement of the teacher, the internship task was successfully completed and the expected goals and requirements of the internship were achieved as a whole. This internship gave me a comprehensive and systematic practice opportunity, which consolidated my theoretical knowledge and enhanced my practical operation ability. From practice, I further realized the importance of disassembly and assembly of CNC machine tools for our CNC maintenance specialty. In my future work, it is not enough to have theoretical knowledge, but also to be able to apply theory to practice. The teacher's requirements for us are: we must complete all the internship links with a serious and rigorous attitude and a highly responsible spirit.

On the first day, when the teacher went to the training room, he told us about the discipline and related events in training. The teacher began to explain to us the basic knowledge of fitter maintenance and the importance of numerical control maintenance, so that we can know how to do better in future training. The teacher particularly emphasized that records should be taken during disassembly and asked us to keep a training diary every day. In this training, I learned a lot, such as patience. I once longed for success. Therefore, we encountered problems at the first meeting. After assembly, we added two nuts. In assembly, it is very accurate. If it is not accurate, it will easily lead to safety accidents, resulting in significant economic losses or deaths. We were all very active at first, but later we got a little bored when we disassembled it more often. Later, I thought it might be that we were just beginning to feel fresh. So I painted patiently. When we assembled the spindle box spline, there was always a fire, but the more we got it, the more it could not fit. Then we settled down to pretend. From this incident, I understand that patience is really important.

Confidence is also important. Without self-confidence, it is difficult to achieve great things. Celebrities have said that confidence is the key to success. It is impossible for our CNC maintenance major to learn future faults or problems in school. We can only succeed if we are bold and cautious and do it boldly and confidently on the basis of understanding the principle.

What I learned deeply from this training is how to use new tools. We are now in an era of rapid development. Whether we can use the new tools correctly and effectively will largely determine whether we can succeed. Secondly, it is our attitude. If we don't have a good attitude towards our work, our ability will be hard to be recognized. That is, attitude determines everything.

In this training, what I have learned most is the combination of theory and practice, and practice is the only criterion for testing truth. Theoretical knowledge is important, but theory without practice is empty talk. Only by truly combining theory with practice and applying theory to practice can we better display our talents. I used to think I could read and understand. After this training, I finally understand that what has not been practiced does not belong to you. As the saying goes, "it is better to believe in books than to have no books." We should read good books, not dead books. What society needs now is people with strong hands-on ability, not people with good theory, which is even more important for our higher vocational students. The goal of our school is to train people with first-class professional skills.

During the training, I feel that I also have many shortcomings, such as my work attitude is not positive enough and my study is not serious enough. I believe that through my efforts, I will definitely get rid of these shortcomings in the future I firmly believe that through this period of internship, the practical experience gained will benefit me for life, and will be constantly verified in the actual work after graduation. I will continue to understand and appreciate the knowledge I have learned in my internship, and I will continue to apply my theoretical knowledge and practical experience to practical work in the future to fully demonstrate my personal value and life value. Strive to realize my ideal and bright future. How can you see a rainbow without experiencing wind and rain! "I believe that my firm confidence and my firm will will will surely realize my beautiful ideal and embark on my own road to success.

Practical students' self-summary 6 I chose the remake theme for my final video assignment, and the borrowed video is the online video Happy Little Two B. Because there are just three people in the dormitory who can cooperate with each other, we unanimously decided that there are always three videos we shoot, which are combined into one and renamed as Happy Female Diaosi. The actors and cameras are all contracted by ourselves. One person is filming, and the other two are acting. I did it. After watching the video, we are all satisfied. At least we got happiness from it and realized the hardships of making a video. The following is my summary of this final assignment.

For this final assignment, our group made plans separately, and finally finalized xxx's "Answer" script, and then we devoted ourselves to the shooting of "Answer". I am responsible for writing the shooting script and participating in the live shooting.

First of all, talk about the shooting situation. The temperature was extremely low on the day of shooting, and even indoors, I could still feel the chill. We took it in the toilet. Originally, we were going to shoot and make a video, but now we are the people in the video. As actors, we are still a little green, and we often laugh too much when we perform. What's more, the script "Answer" originally had four roles, and we only had two actors, so we had to play two roles by ourselves. For us who have little experience, this is quite difficult, and it took us a long time to adapt. The story board we prepared played a great role at this time. We followed the script one by one and slowly got into the role. It's not too long. We've taken the necessary shots. work summary

In this shooting, I realized that both actors and photographers are very important parts in the shooting process. Actors need to know enough about the script to show the character characteristics needed by the plot. Try not to laugh during the shooting and be bold and careful. Photographers should be prepared to shoot scripts to ensure that the shooting is orderly, and the actors can adapt to the shooting and the shooting is planned.

When I was writing about story board, I watched the film The Answer several times. As the lens goes on, I will press the pause button when each lens changes, analyze the intention, scene, angle and shooting method of each lens, and then write it down to form a specific implementation plan before shooting. At the beginning, I saw various lens changes in the middle of the video, and I felt that I couldn't start shooting. After writing the shooting script, I feel suddenly enlightened, and it is easy to find the starting point when shooting.

In a word, the filming of this final assignment gave me a deeper understanding of filming. In the future filming practice, I will pay more attention to the coordination of all aspects and strive to learn all aspects of knowledge. Try to be a real "saint" and a person who knows at least everything.

;