1, first understand the switch mode of the watch. When the watch is turned off, press and hold the phone button for more than 2 seconds to turn it on. When the watch is turned on, press the phone key and intercom key at the same time and keep it for more than 2 seconds to turn it off.

2. After the phone is turned off, insert the phone card according to the instructions on the phone card plug on the left side of the watch. It should be noted that Ubisoft watches currently only support Micro of China Mobile and China Unicom.

SIM card (12x 15mm×0.8mm), commonly known as medium card (that is, the central size of a three-in-one phone card), is inserted with the chip facing up. In order to avoid card identification failure, try not to use old cards, cut cards or Cato. The card in the watch must be enabled with traffic (20M per month is enough) and caller ID.

3. Open the watch and complete the registration. Brand-new watches will be automatically registered on the mobile network after being loaded and turned on for the first time. This process usually takes 2-3 minutes where the signal is good. Press the dialogue key to confirm the successful registration. If the prompt "Homegroup not created" means that the registration is successful, if the prompt "Synchronizing information" means that the registration is incomplete or unsuccessful due to insufficient signal.

4. Download and install the App (you can scan the QR code at the bottom of the product package or search for "Ubisoft Smart Watch" in the application market), and complete the registration of the App on the mobile phone (please use the number in the mobile phone to obtain the verification code when registering).

6. Set the address book in the application. The address book can be set with 20 numbers, of which 5 can be set as emergency call numbers and 5 can be set as one-way answering numbers. When setting the telephone number, if there is a cornet (family number or family package, main and secondary cards, etc.). ), you must set the cornet.

8. The watch calls the mobile phone. In the standby interface, press and hold the voice button. When the microphone appears, say the name of the contact, and then let go of the phone. When talking to a watch, it is advisable to keep a distance of 20-30cm. If it is too close to the watch, sonic boom will affect the watch's recognition of voice commands. Follow the above steps to complete the use of children's smart watches.