Sometimes people send me documents, and when CAD is opened, they warn that there is an education stamp. Is it very tangled?

An educational stamp will also be displayed next to it when printing. Is it annoying?

Are you thinking about using any software to remove it? Download educational software, such as skull.

But have you ever found that it is often unreliable?

Let me tell you a way to go without any software other than CAD.

1

The above picture is a problem when printing.

2

After opening the chart, we select the file and save it as. Select DXF format. . Then shut it down.

three

Find CAD file type selection

four

Select the file again, open it, and remember to choose the following format DXF. Open it again,

five

There are no marks now.

Finally, you can save it as DWG.

six

The above picture is set, and the seal that does not display the CAD education version is printed.

2. How to remove the stamp of 2.cad education edition?

This is a common question:

Method 1. The simplest method: open the drawing and save it in DXF format in 2004; Close CAD, reopen the DXF format diagram just now, and save it as DWG format again; When you open DWG again in the future, it won't be there. Some pictures will prompt that the picture is incomplete after this processing, so use method 2.

Method two. Open the drawing and execute: File-Drawing Utility-Repair Command; Save as DXF format in 2004; Close CAD, reopen the DXF format diagram just now, and save it as DWG format again; When you open DWG again in the future, it won't be there. In addition, you can use the registered version of CAD to make it, so it will not appear again! This is the most basic method!

3. How to remove the educational imprint in CAD?

Send you a software.

There are many ways to delete the education edition from the internet, but I have tried many ways and have never found a quick way.

There is an educational version because someone uses unregistered pirated CAD drawings or someone steals others.

The map itself has an educational version, which will produce an educational version.

Let's demonstrate the method.

Open the cad with education version, and then load the education version plug-in in this area (go to the education version AutoCAD 2000 ~ 2014 _ x86 _ x64).

Load according to the number of digits in your computer, save this drawing after loading successfully, and then close all cad software.

Continue to reopen the pictures in the education version, and then you will find that there is no education version.

The following is a GIF dynamic tutorial diagram. Double-click it to view it.

4. How to remove the logo of AUTOCAD Education Edition?

If you already have a drawing that uses educational printed matter, then you should use this method. In any case, the stamp of the drawings that have been used in the educational version cannot be removed. The only solution is to save this file as a DWG file of version R 14 (you can use AutoCAD2000 or AutoCAD2002) and delete it.

If yours is not an educational version, as long as there is a print stamp, it means that you have inserted or quoted a file element drawn by the educational version software (even a line will go wrong), so it will continue to expand to any of your files through a simple cad element like a virus (unconsciously).

For files that have been infected with the printing stamp problem of autocad education edition, you can simply clear them in one way! Export your file as an external exchange file of autocad through the file output interface of autocad, and then input it through the input interface, and the file will not be stamped! Through experiments, DXF is the best choice. You can remove the stamp by outputting DXFOUT and then inputting DXFIN! Of course, there are DXBOUT, DXBIN and so on!

5.5. There are educational stamps in CAD documents. How to remove them?

When printing a CAD document, the words "Made by Autodesk Education Edition" will appear. You can delete the word by saving it several times, as shown below:

1. Open a new CAD document with the seal of Education Edition, open the "File" option in the upper left corner, and find "Save As" in the open list:

2. In the save dialog box that pops up, change the saved file format to ". Dxf ",and then close the drawing:

3. Find the document in. The dxf format you just saved, open it and click "File", then save it in ". Dwg "format, save and close the document:

4. Find the document saved as. Dwg ",press print preview after opening, as shown below, the words" autodesk Education Edition Product Manufacturing "have disappeared: