Some major qualifications that civil engineering graduates need to take (or want to take) in the future:
Structural engineer? (the hardest)
Civil Engineer (Geotechnical Engineering) (Minor)
Civil Engineer (Road Engineering)
constructors
supervising engineer
Cost engineer
consulting engineer
safety engineer
Wait, list the application conditions.
Basic examination requirements of national first-class registered structural engineer qualification examination
People who meet the following conditions:
2. After graduation from 197 1 year (including 197 1 year), he has been engaged in architectural engineering design for more than 15 years and meets one of the following conditions:
1. As the professional person in charge or the main designer, he has completed four projects (whole process design) above Grade III of the construction engineering classification standard, of which at least 1 project is above Grade II.
2. As the professional person in charge or the main designer, he has completed more than 4 medium-sized industrial construction projects (whole process design), of which the large-scale projects are not less than 1.
National first-class registered structural engineer qualification examination professional examination conditions
People who meet the following conditions:
Note: "Class I personnel" in the table refers to those who have passed the basic examination and continue to apply for professional examinations; "Class II personnel" refers to those who meet the requirements of the basic examination for exemption and only take professional examinations. Such personnel can continue to apply for professional examinations until they pass.
Two, 1970 (including 1970) before the undergraduate and junior college graduates of construction engineering.
3. He has obtained technical secondary school education in construction engineering or similar major before 1970 (inclusive) and has been engaged in structural design for more than 10 years.
Iv. 1970 (including 1970) Before working, he did not have the required academic qualifications and worked in structural design for more than 5 years/kloc-0.
Conditions for National Registered Geotechnical Engineers to Enter the Examination
(a) meet one of the following conditions, can apply for the basic examination:
1. Bachelor degree or above in this major (referring to exploration technology and engineering, civil engineering, water conservancy and hydropower engineering, port waterway and coastal engineering, the same below) or similar major (referring to geological exploration, environmental engineering and engineering mechanics, the same below). ?
2. Obtain a college degree in this major or similar major, and have been engaged in geotechnical engineering for 1 year. ?
3. Have obtained a bachelor's degree or above in other engineering majors, and have been engaged in geotechnical engineering for 1 year.
(two) those who pass the basic examination and meet one of the following conditions may apply for taking the professional examination:
1, obtained the doctor's degree in this major and worked in geotechnical engineering for 2 years; Or obtain a similar professional doctorate, engaged in geotechnical engineering for 3 years. ?
2. Obtain a master's degree in this major and have been engaged in geotechnical engineering for 3 years; Or obtain a master's degree in a similar major and have been engaged in geotechnical engineering for 4 years. ?
3. Graduated from a double bachelor's degree or postgraduate class in this major and engaged in geotechnical engineering for 4 years; Or graduated from a double bachelor's degree or postgraduate class in a similar major and worked in geotechnical engineering for 5 years. ?
4. Obtain a bachelor's degree in this major and have been engaged in geotechnical engineering for 5 years; Or obtain a bachelor's degree in a similar major and have been engaged in geotechnical engineering for 6 years. ?
5. Obtain a college degree in this major and have been engaged in geotechnical engineering for 6 years; Or obtain a college degree in a similar major and have been engaged in geotechnical engineering for 7 years. ?
6. Obtain a bachelor's degree or above in other engineering majors and have been engaged in geotechnical engineering for 8 years.
(3) Those who meet one of the following conditions may be exempted from the basic examination and only need to take the professional examination.
1, 199 1 years ago, he obtained a master's degree or above in this major and worked in geotechnical engineering for 6 years; Or obtain a master's degree or above in a similar major, and have been engaged in geotechnical engineering for 7 years. ?
2. 199 1 years ago, I graduated from a double bachelor's degree or postgraduate class in this major and worked in geotechnical engineering for 7 years; Or graduated from a double bachelor's degree or postgraduate class in a similar major and worked in geotechnical engineering for 8 years.
3. Before 1989, he obtained a bachelor's degree in this major and worked in geotechnical engineering for 8 years; Or obtain a bachelor's degree in a similar major and have been engaged in geotechnical engineering for 9 years. ?
4. Before 1987, he obtained a college degree in this major and worked in geotechnical engineering for 9 years; Or obtain a college degree in a similar major and have been engaged in geotechnical engineering for 10 years. ?
5. 1985 Obtained a bachelor's degree or above in other engineering majors and worked in geotechnical engineering for a total of 12 years. ?
6. Before1982, he obtained a college degree or above in other engineering majors and worked in geotechnical engineering for 9 years. ?
7. Before 1977, he obtained technical secondary school education in this major or before 1972, and worked in geotechnical engineering for 10 years.
Registration requirements for registered civil engineer (road engineering) qualification examination
All citizens of People's Republic of China (PRC) (People's Republic of China (PRC)) who abide by national laws and regulations, abide by professional ethics and have corresponding professional education and professional practice conditions can sign up for the qualification examination of registered civil engineer (road engineering).
(a) meet one of the following conditions, can apply for the basic examination:
1. Bachelor degree or above in this major (civil engineering) or similar major (port and waterway engineering, exploration technology and engineering). ?
2. Obtain a college degree in this major or similar major, and have been engaged in professional design of road engineering for 1 year. ?
3. Obtain a bachelor's degree or above in other majors, and have been engaged in professional design of road engineering for 1 year. ?
(2)? Those who pass the basic examination and meet one of the following conditions may apply to take the professional examination:?
1. After obtaining the doctor's degree in this major, he has been engaged in the professional design of road engineering for 2 years; Or after obtaining a similar professional doctorate, he has been engaged in road engineering professional design for 3 years. ?
2, after obtaining a master's degree in this major, engaged in road engineering professional design work for 3 years; Or after obtaining a master's degree in a similar major, he has been engaged in road engineering professional design for 4 years. ?
3. Having obtained a double bachelor's degree including this major or graduated from the postgraduate class of this major, and having been engaged in professional design of road engineering for 4 years; Or after graduating from a double bachelor's degree or graduate program in a similar major, he has been engaged in road engineering professional design for 5 years. ?
4. After obtaining a bachelor's degree or a degree that has passed the professional education evaluation, he has been engaged in professional design of road engineering for 4 years; Or after obtaining a bachelor's degree or degree that has not passed the professional education evaluation, he has been engaged in the professional design of road engineering for 5 years; Or after obtaining a bachelor's degree or degree in a similar major, he has been engaged in road engineering professional design for 6 years. ?
5, after obtaining the professional college degree, engaged in road engineering design work for 6 years; Or after obtaining a college degree in a similar major, he has been engaged in road engineering professional design for 7 years. ?
6. After obtaining a bachelor's degree or above from other professional universities, he has been engaged in professional design of road engineering for 8 years. ?
(3)? Before June 65438+February 3, 20021,those who meet one of the following conditions may be exempted from the basic examination and only need to take the professional examination:
1. After obtaining the doctor's degree in this major, he has been engaged in the professional design of road engineering for 5 years; Or after obtaining a similar professional doctorate, he has been engaged in road engineering professional design for 6 years. ?
2. After obtaining a master's degree in this major, he has been engaged in professional design of road engineering for 6 years; Or after obtaining a master's degree in a similar major, he has been engaged in road engineering professional design for 7 years. ?
3. Obtained a double bachelor's degree including this major or graduated from the postgraduate class of this major, and has been engaged in road engineering professional design for 7 years; After graduating from a double bachelor's degree or graduate program in a similar major, he has been engaged in road engineering professional design for 8 years. ?
4. After obtaining a bachelor's degree or degree in this major, he has been engaged in professional design of road engineering for 8 years; Or after obtaining a bachelor's degree or degree in a similar major, he has been engaged in road engineering professional design for 9 years. ?
5. After obtaining a college degree in this major, he has been engaged in professional design of road engineering for 9 years; Or after obtaining a college degree in a similar major, he has been engaged in professional design of road engineering for 10 years. ?
6. After obtaining a bachelor's degree or above in other majors, he has been engaged in professional design of road engineering for 12 years. ?
7. After obtaining college education in other majors, he has been engaged in professional design of road engineering for 15 years. ?
8. Obtained secondary school education in this major, and has been engaged in professional design of road engineering for 25 years; Or after obtaining a technical secondary school degree in a similar major, he has been engaged in road engineering professional design for 30 years. ?
(4) Hong Kong and Macao residents who meet the registration requirements for the examination may apply for registration as civil engineers (road engineering) of survey and design? Qualification examination. The applicant shall submit his/her identity certificate, the corresponding professional education or degree certificate recognized by the education administrative department of the State Council, and the certificate of working years in road design-related majors.
Measures for professionals in Taiwan Province Province to take the examination shall be formulated separately. ?
Foreign professional and technical personnel, apply for registration as a survey and design civil engineer (road engineering)? Measures for qualification examination shall be formulated separately.
What are the requirements for the national first-class registered architect qualification examination?
(1) Anyone who abides by national laws and regulations and meets one of the following conditions may apply to take the first-class constructor qualification examination:
1, obtained a college degree in engineering or engineering economics, and worked for 6 years, including 4 years in construction management of construction projects.
2. Obtain a bachelor's degree in engineering or engineering economics, and have worked for 4 years, including 3 years in construction management of construction projects.
3. Graduated from double bachelor's degree or postgraduate class in engineering or engineering economics, and worked for 3 years, including 2 years in construction management of construction projects.
4. Get a master's degree in engineering or engineering economics, and have worked for 2 years, including construction management of construction projects 1 year.
5. Get a doctorate in engineering or engineering economics, and have been engaged in construction management of construction projects for 1 year.
(2) Those who meet the above conditions (1) and have obtained the qualification certificate of first-class project manager of construction enterprises issued by the Ministry of Construction before 65438+February 3, 2003/KLOC-0, and meet one of the following conditions, can be exempted from the examination of the two subjects of construction engineering economics and construction engineering project management, and only participate in the construction engineering regulations and related knowledge and
1, employed as a senior professional and technical post in engineering or engineering economy.
2 with engineering or engineering economics college degree or above, engaged in construction project construction management for 20 years.
(three) the personnel who have obtained the qualification certificate of the first-class construction engineer can also choose the corresponding major of the subject of "Professional Engineering Management and Practice" according to the actual needs of the work and sign up for the examination. Those who pass the examination shall be awarded the corresponding professional qualification certificate uniformly printed by the state. This certificate serves as the basis for adding professional practice categories when registering.
Requirements for the National Registered Supervision Engineer Qualification Examination
All citizens of People's Republic of China (PRC) who are healthy, law-abiding and meet one of the following conditions can apply to take the qualification examination for supervision engineer.
(a) to participate in the general (4) examination conditions:
1. College degree or above, major in engineering technology or engineering economics. In accordance with the relevant provisions of the state, he has obtained intermediate positions in engineering technology or engineering economy and has served for 3 years.
2, in accordance with the relevant provisions of the state, to obtain senior positions in engineering technology or engineering economy.
3. 1970 (including 1970), graduated from technical secondary school majoring in engineering technology or engineering economy, and obtained the intermediate position of engineering technology or engineering economy in accordance with the relevant provisions of the state, and served for three years.
(II) Exemption conditions for some subjects: Applicants who are engaged in engineering construction supervision and meet the following four conditions may be exempted from the two subjects of "Construction Project Contract Management" and "Construction Project Quality, Investment and Progress Control".
Graduated from technical secondary school (including technical secondary school) majoring in engineering technology or engineering economy before 1 and 1970 (including 1970);
2, in accordance with the relevant provisions of the state, to obtain senior positions in engineering technology or engineering economy;
3. Engaged in engineering design or engineering construction management for 15 years;
4, engaged in supervision work 1 year.
(3) In the application conditions, the number of years of relevant professional work shall be calculated based on the end of the year of application.
Requirements for National Certified Cost Engineer Qualification Examination
(a) where People's Republic of China (PRC) citizens, law-abiding and meet one of the following conditions, can apply to participate in the cost engineer qualification examination:
1, graduated from junior college majoring in engineering cost, engaged in engineering cost business for 5 years; Graduated from college, engaged in engineering cost business for 6 years.
2. Obtain a bachelor's degree in engineering cost and have been engaged in engineering cost business for 4 years; Bachelor degree in engineering or engineering economics, engaged in engineering cost business for 5 years.
3. Obtain the second bachelor's degree or graduate class of the above major and obtain a master's degree, and have been engaged in engineering cost business for 3 years.
4. Obtain the above-mentioned professional doctor's degree and have been engaged in engineering cost business for 2 years.
(2) The above-mentioned academic qualifications refer to the official academic qualifications recognized by the Ministry of Education, and the relevant working years refer to the sum of the time spent in relevant work before and after obtaining the required academic qualifications, and the deadline is the end of the year of registration.
(3) Anyone who meets the examination requirements of cost engineers and has been employed as a senior professional and technical post before the promulgation of the Interim Provisions on the Qualification System of Cost Engineers (1August 26th, 1996) and meets one of the following conditions may be exempted from the two subjects of Basic Theory of Project Cost Management and Related Laws and Regulations and Construction Engineering Technology and Measurement, and only participate in project cost pricing and control.
1, 1970 (including 1970, the same below) graduated from engineering or engineering economics, and worked in engineering cost business for over 15 years.
2. 1970 Graduated from college, majored in engineering or engineering economics, and engaged in engineering cost business for 20 years.
3. 1970 Graduated from technical secondary school of engineering or engineering economics, and worked in engineering cost business for 25 years.
(4) According to the spirit of the document "Notice of the Ministry of Personnel on Doing a Good Job for Hong Kong and Macao Residents to Participate in the Qualification Examination for Professional and Technical Personnel held in the Mainland" (No.9 [2005] of the Ministry of Personnel), since 2005, all Hong Kong and Macao residents who meet the relevant provisions of the qualification examination for cost engineers can sign up for the corresponding professional examinations in accordance with the prescribed procedures and requirements. Hong Kong and Macao residents shall submit their identity certificates, corresponding professional qualifications or degree certificates recognized by the education administrative department of the State Council, and certificates of working years in relevant professional institutions to the registration point.
Requirements for the National Certified Consulting Engineer Qualification Examination
(a) to participate in all subjects (five subjects) examination conditions:
Any citizen of People's Republic of China (PRC) who abides by national laws and regulations and meets one of the following conditions may apply for the qualification examination of registered consulting engineer (investment).
1, having been engaged in engineering consulting related business for 8 years after graduating from engineering technology or engineering economics;
2, engineering technology or engineering economics after graduation, engaged in engineering consulting related business for 6 years;
3. After graduating from the second bachelor's degree or postgraduate class in engineering technology or engineering economics, he has been engaged in engineering consulting related business for 4 years;
4. After obtaining a master's degree in engineering technology or engineering economics, he has been engaged in engineering consulting related business for 3 years;
5. After obtaining a doctorate in engineering technology or engineering economics, he has been engaged in engineering consulting related business for 2 years;
6. Those who have obtained the above-mentioned education or degree in non-engineering technology and engineering economics will have a corresponding increase of 2 years in engineering consulting-related business years;
7. Other conditions stipulated by the Ministry of Personnel and the National Development and Reform Commission.
(two) to participate in the exemption of some subjects (two subjects) examination conditions:
Meet one of the following conditions, can be exempted from engineering consulting introduction, macroeconomic policy and development planning, project organization and management and other subjects:
1, those who meet the assessment scope but fail the assessment;
2. Won the Excellent Engineering Consulting Achievement Award of the State Planning Commission or China Engineering Consulting Association and the National Excellent Engineering Survey and Design Award;
3, before the end of 2002, according to the provisions of the state to obtain senior professional and technical post qualifications, and engaged in engineering consulting related business for 8 years;
4. Pass the national qualification examination, obtain the qualification certificate of engineering technology, and have been engaged in engineering consulting related business for 8 years.
(3) Description of application conditions:
1. Anyone who meets the requirements specified in (1), whether retired or not, can sign up for the qualification examination of registered consulting engineer (investment).
2. The "working years" specified in (1) refers to the total time for applicants to engage in engineering consulting-related business, and the deadline is the end of the year of examination registration, calculated according to the "first anniversary".
3. The "engineering technology" major mentioned in (1) refers to all science and engineering majors specified by the Ministry of Education; The so-called "engineering economy" majors include engineering management, investment economy, technical economy, project management and economic management. The requirements for academic qualifications in the registration conditions refer to the national academic series recognized by the Ministry of Education.
4. The "engineering consulting related business" mentioned in (1) refers to the eight service areas stipulated in the Measures for the Implementation of Qualification of Engineering Consulting Units (Revised) issued by the former State Planning Commission, namely, planning consulting, project proposal preparation, project feasibility study report preparation, evaluation consulting, engineering design, bidding consulting, engineering supervision and management consulting, and engineering consulting management, investment construction management and management consulting related to these eight service areas.
5. (2) The "unqualified persons" mentioned in 1 refer to those who meet the assessment conditions but fail due to quantity control. The list of these personnel is provided by the National Office of the Leading Group for Registered Consulting Engineers (Investment).
6. (II) The "main winners" mentioned in 2 refer to all the personnel listed in the first, second and third prizes of outstanding research achievements issued by the former State Planning Commission (formerly known as the Science and Technology Progress Award), the first, second and third prizes of national outstanding engineering consulting achievements issued by China Engineering Consulting Association, and the award certificates or award lists of outstanding engineering design, engineering survey gold, silver and bronze awards issued by the Ministry of Construction.
The engineering qualification certificates mentioned in 7.4 are limited to the first-class registered architects, first-class registered structural engineers, registered urban planners, cost engineers and supervision engineers issued by the Ministry of Construction and the Ministry of Personnel.
Requirements for National Certified Safety Engineer Qualification Examination
(a) People's Republic of China (PRC) citizens, abide by national laws and regulations, meet one of the following conditions, can apply for the qualification examination of registered safety engineer:
1, with technical secondary school education in safety engineering and engineering economics, and engaged in safety production-related business for 7 years; Or obtain technical secondary school education in other majors and have been engaged in safety production-related business for 9 years.
2, obtained a college degree in safety engineering, engineering economics, engaged in safety production related business for 5 years; Or obtain a college degree in other majors and have been engaged in safety production-related business for 7 years.
3, obtain a bachelor's degree in safety engineering, engineering economics, engaged in production safety related business for 3 years; Or obtain a bachelor's degree in other majors and have been engaged in safety production-related business for 5 years.
4. Obtain the second bachelor's degree in safety engineering, engineering economics or postgraduate classes, and have been engaged in safety production related business for 2 years; Or obtain a second bachelor's degree or graduate class in other majors and have been engaged in safety production-related business for 3 years.
5. Obtain a master's degree in safety engineering and engineering economics, and have worked in safety production-related businesses for 1 year; Or obtain a master's degree in other majors and have been engaged in safety production-related business for 2 years.
6. Get a doctorate in safety engineering and engineering economics; Or obtain other professional doctorate, engaged in safety production related business for a total of 1 year.
(II) Professionals who meet the qualification examination requirements for registered safety engineers, who have been evaluated and engaged in senior professional and technical positions before the end of 2002 and have been engaged in safety production-related business for 10 years, may be exempted from taking the two subjects of safety production management knowledge and safety production technology, and only take the two subjects of safety production law and related legal knowledge and safety production accident case analysis.
(3) According to the spirit of the document Notice of the Ministry of Personnel on Doing a Good Job for Hong Kong and Macao Residents to Participate in the Qualification Examination for Professional and Technical Personnel held in the Mainland (No.9 [2005] of the Ministry of Personnel), since 2005, all Hong Kong and Macao residents who meet the relevant provisions of the qualification examination for registered safety engineers can sign up for the corresponding professional examinations in accordance with the prescribed procedures and requirements. Hongkong and Macao residents applying for the qualification examination of registered safety engineer shall submit their identity certificate, the corresponding professional education or degree certificate recognized by the education administrative department of the State Council, and the working experience certificate of relevant professional institutions.
(4) The above academic qualifications refer to academic qualifications or degrees recognized by the national education department; The requirement of working years in related businesses refers to the sum of working hours in related businesses before and after obtaining the required academic qualifications, and the deadline is the end of the year of examination registration.