1. Connect the LAN port of the wireless router with the network cable interface of the computer; 2. Go to the WEB management page of the wireless router, generally 192. 168. 1, and enter the account password. General account number: administrator password: admin 3. Locate the DHCP management entry for wireless route 4. Turn off the DHCP function of wireless routing (on by default) 5. Save 6. Restart the router and computer 7. Connect the campus network port with the LAN port (not the WAN port) of the wireless router with the network cable 8. The computer's wireless network card will search for wireless signals, but because the DHCP function has been turned off, the computer has not obtained an IP address and will make a network connection in the lower right corner. 9. Start Ruijie, and choose Ruijie's connection network card as your wireless network card (Note: Ruijie certification does not allow two running network cards on a machine, otherwise the current system working environment will pop up after certification, which conflicts with software operating environment and the software will not run normally! Code2 message, so disable the Ethernet card of the notebook when selecting the wireless network card) 10, and then set the IP address in the wireless network card; 1 1. Then authenticate;
My wireless route is Mercury 54M, I hope I can help you.
Question 2: How to set up the campus network wireless router? Do you have a separate account and password? I think your network must be the kind that can connect to the computer without dialing. This network does not need routing.
As for the setting of the route, you connect the route to the computer, then open IE and enter 192. 168. 1 in the address bar, and press enter. TP should be 1. 1. If not, change it to 0. 1. After opening the login interface, enter admin in the user name and password. After entering, use the setup wizard to setup step by step. You can download the settings for wireless Internet access. Baidu Library is introduced in detail. I don't have a route at hand, and I forget the specific settings. Remember to set a password and don't let others surf the Internet.
Question 3: How can the campus network pick you up with a router? Is this a requirement to provide a mac address to the school? This is the network card and mac address, which means that one account can only access the Internet for one machine. You can only use the router as a switch, then connect to the campus network and use the router as a switch. You have to connect the campus network cable to the LAN port of the router, and then two other people use their own accounts to connect to the campus network. It is recommended to log in to the router when surfing the Internet and turn off the DHCP function of the router. If you want to surf the Internet through the router with only one account, you should see if your router has a function called mac address cloning. If so, the problem is simple. You only need to clone the physical address of the password of the campus network account you applied for, that is, the mac address, and enter it to use. If you forget the mac address, open the machine you used to log in to this account in the start menu and type cmd. Then enter ipconfig/all in the window, you can check the mac address, then set your own account password in the router, and then two people can connect to the router, and naturally they can surf the Internet together. I checked, your tp link TL-R402 router has the function of mac address cloning, which can be solved by the second method I mentioned.
Question 4: How does the router directly connect to the campus network? Method 1: Connect the lan port of the router to the interface on the wall with a network cable, and this is the AP. Enter the router (refer to Method 2) and turn off the DHCP service, as if you have to log in to a dial-up interface every time before surfing the Internet, and then you can do it.
Method 2: Connect the network cable to the WAN port, enter the gateway ip in the browser address bar, and enter the account number and password in the pop-up box, which can be found at the bottom of the router. Select dynamic ip in Internet settings to intervene, save and restart the route. It seems that we have to dial the login interface first.
The difference: 1 In fact, you regard routing as a switch and extend three similar interfaces on the wall. The advantage is that you can compete with other dormitories online, and other dormitories should also be connected by 1. 2. Build a wireless local area network and connect it to the campus network with a router. The advantage is more security, but you can only play in one dormitory.
Question 5: About the steps of setting up a router in the campus network: 1. Enter 192. 168. 1 to enter the router. 2. After entering the account password by default, it is shown as admin. 3. Select network parameters-> LAN port settings-> Change 192. 168. 1 to something else, for example:192.168.2.1.4. Then restart the route 192. 168.2. Click Next to display the following figure 6. Select dynamic IP- > Next, the SSID is the wireless name channel. Click to automatically or randomly select the password of WPA-PSK/WPA2-PSK, and enter 8 or more digits at will. This is the wireless password. -& gt; Go straight to the next step. After restarting, repeat the operation in step 4. Enter the router. Select the DHCP device on the left. Click Select Not Enabled. As shown below, and then restart. Plug the network cable into any port of 1234 to surf the Internet.
Question 6: How to set up a wireless router when using the campus network? 1. Does your campus network require clients to log on to external networks?
No, just set it at home.
2. Connect the computer to the client and connect the router to the computer (2 network cable interfaces are required). You can only connect to the WIFI network after logging in to the client.
Question 7: How to use the WIFI computer on the wireless router in the campus network? Then download a WIFI sharing software. After setting up, the computer phone can be connected at the same time.
Question 8: How to set the wifi of the campus network router? Campus networks in different areas use different technical means to restrict users from using routers; Only when the third-party firmware is debugged or even refreshed on site can the router be used normally; There is no fixed setting method provided; If satisfied, please give points!
Question 9: How to set up Tengda router on campus network? 10 points hello,
Generally speaking, the campus network is an IP address assigned by the school network administrator.
If you want to use Tengda router to surf the Internet on campus, you must first contact the school network administrator and provide an IP address, subnet mask, default gateway and DNS address.
Select static IP in the router settings.
Fill in the IP address, subnet mask, default gateway, DNS address,
Open DHCP service
Connect locally on the computer and choose to automatically obtain IP, then you can surf the Internet ~
Question 10: How to set up wireless router authentication login in campus network? Our commonly used TPLINK router supports three ways: PPPOE/ dynamic IP/ static IP.
The landlord uses a static IP (PPPOE is not available), so you have to enter a static IP yourself. As for login, you still need to perform a basic login procedure on any computer (this non-standard login is impossible for a router). We use the radio and television network, yes, but it is dynamic IP. Very easy to use, my router+wireless AP brought two computers, which was very successful.
As long as your configuration is correct, your login program should be able to penetrate the router (broadband cable plugged into WAN), so that everyone can connect wirelessly or plug into LAN port. It is best to use IPCONFIG/ALL to check DNS and fill it in statically.