Introduction to Yahweh Quick Record:

Use the most popular and easy-to-learn "Pinyin Input Method" to input Chinese into the recorder. According to the Chinese Pinyin scheme stipulated by the state, based on Putonghua, 265,438+0 phonetic codes and 34 rhyme codes are compiled, which are combined into more than 400 syllable codes as the basis of "quick recording codes", and a series of phonetic codes, rhyme codes and syllable codes are compiled.

Characteristics of speed recorder:

Through the decoding and editing system, the recorder can realize real-time display, screen projection, quick editing and printing, and can completely complete meetings and manuscripts.

Yahweh's right hand and five fingers:

When using the keyboard of the speed recorder, the five fingers of the left hand and the right hand need to be separated, the key positions are symmetrical, and the key positions of the left hand and the right hand are the same.

Little finger: a, o key

Ring finger: n, e key

Middle finger: I, u key

Index finger: D, Z, G, W keys.

Thumb: x, b key

In some cases, it is necessary to use the middle finger, ring finger and little finger flexibly to move forward and hit adjacent key codes.

Multi-finger multi-key mode

When using the keyboard of the speed recorder, you can press multiple key codes at the same time with one finger, as follows:

One is to hit by hand. Several adjacent fingers hit multiple key codes at the same time, such as "in" and "EO".

The second is to hit your fingers horizontally. Non-adjacent fingers hit the corresponding key code at the same time, such as "GIA".

The third is a flat hit. It refers to the same attack key verbally, such as "Gian" and "Zueo".

The fourth is oblique strike. Tap the corresponding key code with two fingers up and down, such as "UA" and "IE".

1. The most popular and easy-to-learn Chinese input method is "(Pinyin Input Method)".

2. As far as the characteristics of quick recording (high efficiency) are concerned, quick recording can realize instant display, screen projection, quick editing and printing, and it is completely possible to "release the manuscript after the meeting" through the decoding and editing system.

3. How many key codes, such as "in" and "EO", are struck by several adjacent fingers at the same time in the process of using the keyboard of the speed recorder, which belongs to the way of how many key codes are struck by one finger at the same time.

4. For the debugging steps of the quick recording system, the first step is to see if there is an error prompt when the quick recording system is started.

5. Possible faults of the speed recorder include: power supply system (burnt or damaged), LCD fault, aging failure of key core contacts, etc.

6. The faults of quick recording software include: incorrect root directory setting; The serial number is set incorrectly; (USB driver) installation error, etc.

7. If the speed recorder loses words inexplicably, there may be something wrong with the keyboard.

8. The content displayed on the software interface is (View).

9. The specific code of the Chinese character "Yu" is (x: iu).

10, "yes" (specific code) is "XZI".

1 1, the Chinese lowercase number specific code can be formed by directly adding a "w" to the syllable code, such as (one, two, five, seven, ten).

12, omitting some Chinese lowercase figures, such as (three, four, six, eight, nine, zero) on the basis of adding "w".

13. The specific code of Chinese uppercase numbers refers to the specific code corresponding to lowercase numbers with the right hand and (w) with the left hand.

14. The structure of the specific code of monosyllabic words is similar to that of (capital figures), that is, the right hand plays the syllable code and the left hand plays "X" or "W".

15, and some special (high-frequency monosyllabic words) are designated by typing "XW" with the left hand and the corresponding syllable code with the right hand.

16, the shape code of "ground" is (BDU: IE).

Keys 17 and "(xna: w)" are left moving function keys on the editing keyboard.

18, Chinese lowercase number specific code (specific by abbreviated code or adding keys)

19, not all (Chinese characters) have (specific codes)

20. All Chinese characters can be recorded normally without using specific codes.

The codes of 2 1 and (monosyllabic words) correspond to Chinese characters one by one.

22. (The specific code of the last component disyllabic words) is quite special, which basically consists of the phonetic code of the first word +W+ the rhyme code of the second word.

23. The abbreviation "b: x" can only be used for the word (can't).

24, the syllable "know", you can arrange "z: x" (know) and (z: w (only)) two shorthand codes.

25. Enter the abbreviation code of polyphonic words and the syllable code of the words (the first and second words) that were hit by the arrow for the first time.

26.(WINA) is the abbreviation of "one thousandth".

27, (shape code) is defined according to the font of Chinese characters, and Chinese characters are input by Chinese shorthand recorder.

28. There is a general rule for the coding method of symbol input function, that is, press (Xu) with left hand and press syllable code with right hand.

29. In order to improve the speed of the intermediate speed training stage of quick recording, it is necessary to further master (syllable code).

30. By being familiar with the training of the article, you can not only be proficient (syllable code), but also improve the coherence.

3 1, specific code, mainly common (high-frequency monosyllabic words) specific code.

32. When using the speed recording keyboard, it refers to the same verbal attack key, such as "Gian" and "Zueo", which belongs to the (flat-stroke) mode of hitting multiple key codes at the same time.

33. If the speed recorder is connected to the computer with USB interface, you need to install the corresponding (driver).

34. Find the installation path of the quick recording system, find the "Separate.exe" file in it, and use the mouse (right click) to pop up the menu and find "Create Shortcut".

35. Possible faults of the speed recorder include power supply system (burning out or open circuit); LCD failure; Aging failure of key core contacts, etc.

36. If the speed recorder is definitely good, there is no error message prompt, but it can't be input. It may be that the (serial number) is set incorrectly or the USB driver failed to install.

37. If there are multiple speed recorders or computers, you can make full use of "(replacement method) to accurately judge the reasons for applause.

38. Check (speed recorder power supply) when the indicator light of the speed recorder is not on.

39. You can select YW- Dan in the "Set Shorthand Dictionary" dialog box in the Shorthand System (Options) menu.

40. When using (personal thesaurus), you need to back up the original file first.

4 1, the specific code of Chinese character "Yu" is (x: iu).

45. Monosyllabic word special codes include Chinese character special codes, (high-frequency monosyllabic word special codes) and so on.

46. Chinese character specific codes include "Yes", Chinese lowercase numerals and (Chinese uppercase numerals) specific codes.

47. The syllable "qi" can have two specific codes of "qi and period".

48. There are also some special high-frequency monosyllabic words that are designated by typing "XW" with the left hand and the corresponding syllable code with the right hand.

49. Specific codes, especially (monosyllabic words specific codes) are high-frequency Chinese characters.

50. Compilation of Chinese lowercase digital special code (with abbreviated code or special key)

5 1, the monosyllabic word specific code is only for part (Chinese characters).

52. All Chinese characters can be recorded normally without using monosyllabic words (specific codes).

53. The specific coding of monosyllabic words corresponds to (Chinese characters).

54. (The specific code of the post-component polyphonic word) is quite special, basically consisting of the phonetic code of the first word +W+ the rhyme code of the second word, and it is hit with one blow.

55. The shorthand characters with postposition elements are played with the left hand to type the syllable code of the first Chinese character and the right hand to type it (the postposition element disyllabic word specific code).

56. The word "ism" in the following words belongs to the specific code of disyllabic words after quick recording.

57. (abbreviation code of disyllabic words) is attacked by omitting the right syllable code and replacing it with "X" or "W".

58. The shorthand code for the syllable "no" is (can't help it).

59. The abbreviation code of four-tone words is to omit the syllable codes of the two words in the middle of the word and replace them with (x: x).

60. Enter the syllable code of the first keystroke of polyphonic words (the first and second words).

6 1. In the following abbreviations, you must press "X" with your right hand to input (Revolution).

62. Paired disyllabic words are slightly coded with the right hand, and there is a certain regularity when typing "X" or "W"; That is, whether the second word (syllable code) or Chinese phonetic alphabet contains' u'.

63. The shape code of "Zhang" is (GUEO:BZNO).

64. The most commonly used functions of speed recorder to imitate standard keyboard control keys are to simulate Ctrl, Altg and SHIFE, which are left-handed strokes (,XAO, Xue).

66. In order to conveniently use the keyboard of the tachometer for simple and basic editing operation in the tachometer system, the software system (editing keyboard) of the tachometer is specially designed.

67, edit the keyboard with the function key of the left hand (XAN) to achieve conversion.

68. The (xan: w) key is the left shift function key on the editing keyboard.

69. Double-click the Ywinput.exe file in the (YWWIN) directory. If it runs normally, you can see a quick recording icon in the taskbar in the lower right corner of the screen.