The technical parameters of forklift are used to express the structural characteristics and working performance of forklift. The main technical parameters are: rated lifting weight and load.

Center distance, maximum lifting height, gantry inclination, maximum traveling speed, minimum turning radius, minimum ground clearance, wheelbase and wheel track, etc.

1. Rated lifting weight: The rated lifting weight of forklift refers to the maximum weight of the goods allowed to be lifted when the distance from the center of gravity of the goods to the front wall of the fork is not greater than the distance from the center of load, expressed in t (tons). When the center of gravity of the goods on the fork exceeds the specified distance from the load center, the lifting weight should be reduced accordingly due to the limitation of the longitudinal stability of the forklift.

2. Load center distance: Load center distance refers to the horizontal distance t from the center of gravity of the fork to the front wall of the vertical section of the fork when standard goods are placed on the fork, and the unit is mm (millimeter). For 1T to 4T forklifts, the distance between load centers is 500mm.

3. Maximum lifting height: The maximum lifting height refers to the vertical distance between the upper surface of the horizontal section of the fork and the horizontal ground where the forklift is located when the forklift is fully loaded and lifts the goods to the highest position on the flat and solid ground.