Then drag the installer to the command window, and the system will automatically add the path, and then add-I GUI after the installer;

Enter the car and can be installed normally;

Follow-up cracking and changing Chinese to participate in the following paragraphs (source network thanks for originality):

About VERICUT… ... ...

VERICUT software can simulate CNC machining to detect errors, potential collisions and inefficient machining areas. Before the program is transmitted to the machine tool, VERICUT can let the NC programmer find and correct the errors, which can avoid the trial cutting of the workpiece. VERICUT can also optimize the cutting speed of NC programs and achieve higher machining efficiency-even in high-speed milling!

Vericut 7.0 also redesigned the tool manager to make the program optimization module of Vericut-optipath easier to use. The tool optimization library will be set in the tool manager, which not only simplifies the use process, but also allows different tools to reference the same optimization library. The New Tool Assembly Wizard allows users to create a new milling cutter through a dialog box in a simple user interface. If the user has established a tool in another tool library, the user can refer to or copy the entire tool, or the blade and the tool holder, and create a new tool.

The model output function of Vericut has been enhanced in 7.0, which can output CATIA V5, ACIS SAT and STEP models. Model output can create CAD model in any process of Vericut simulating NC program. The model contains various machining features, such as holes, chamfers, arcs, grooves and bosses. These features are very accurate, just like the actual machining features. In Vericut 6.2, the model output can output features that can be generated, and single features or bad features that cannot be generated (such as "pits" generated by ball-end milling cutter) can output comprehensive features. Other enhancements make the surface and boundary of the model smoother. The output file uses NURBS to trim curves, thus reducing the file size.

Advantages and characteristics

1.VERICUT is used for interactive simulation of 2~5 axis milling, drilling, turning and EDM. When milling/turning operations are involved, it is easy to identify and correct errors that lead to blank collision, blank fracture and fixture or tool fracture. In the process of VERICUT simulation, the overcutting detection can be really carried out. VERICUT can compare the cutting part with the design prototype to identify the differences and ensure that the machined part conforms to the design consciousness. Users can build any tool, fixture or tool holder shape for arbitrary rotation, cross-sectional view and measuring the size of another part.

Verification and Analysis of Workpiece Simulation

Save time and money

* Training programs and mechanical operators.

* Reduce program errors

* Accelerate product development

* Improve factory productivity

* Improve the quality of another piece.

* Reduce waste or empty knives.

* Enhance confidence

* Provide better document management.

According to the cutting conditions and the ability of NC tools, ptiPath can automatically modify the NC program to make it faster and more efficient.

The working principle of OptiPath is simple; It is to increase the cutting feed speed when cutting slightly, reduce the feed speed when cutting heavily, divide the cutting drive into small segments, and determine the ideal feed speed of each segment according to the material cutting amount. The tool path will not be changed, and new information will be automatically added to the new tool path file.

* Reduce the processing time by more than 50% or optimize the cutting feed.

* Improve the quality of machined surfaces.

* Improve production efficiency.

* Reduce mechanical and tool wear.

* Reduce the workload of operators

A collision of CNC machine tools may cost tens of thousands of yuan, which not only damages the machine tools, but also delays the whole product development plan. VERICUT can be used to detect machine tools, and the conflict of controllers in instructions can avoid machine tool collision. The simulation of NC machine and controller in VERICUT is characterized by the simulation of NC machine tools and controllers. Because some of them are driven by the same function, the machine tool transmission simulated on the computer will be exactly the same as in the factory.

* Training programs and mechanical operators who do not use machine tools.

* Reduce collision and friction.

* check the machine function

* Enhance confidence

:: Improving the documentation.

[passed the security check] avast! Free antivirus software

[Program Version ]5.0.462

[Virus Database Release Date] 100407- 1

[Pass the installation test] WinXP+SP3

The copyright of the software belongs to the original author and the original software company. This is just a trial here. If you like, please buy genuine software.

VERICUT can run on Windows XP, Windows XP64 and Windows 2000.

Click here to view Vista status.

VERICUT 7.0 is not supported by Windows 98, Windows ME and.

Windows NT operating system (vericut 7.0) does not support Windows 98, ME and NT.

The installation process is not very difficult, and I don't know what it means when I meet a picture.

know nothing at all

1 inch, 2mm

Cracking method

1 put "cgtech.lf" in the "MAGNiTUDE" folder under C:\cgtech70\windows\license.

2 Click Start-Programs -CGTech Vericut 7.0- License Server Only-Configure License &; Install server

According to the prompt, a dialog box written in VB will pop up after the operating point is determined twice, and then:

1): Open cgtech.lf in the MAGNiTUDE folder with notepad.

2): Copy all the words in it and paste them into the open dialog box. You will be prompted that there is an error. Ignore him and click the close button at the bottom.

3. Click Start-All Programs -CG tech VeriCut 7.0- License Server Only-Start the license server.

4。 accomplish

Modify the software interface language

substitution method

1 overwrite VcRes.local in c: \ cgtech70 \ classes \ Chinese _ simplified with C:\cgtech70\classes\english.

2 open vericut.bat in C:\cgtech70\windows\commands with notepad, and search for "English" and replace it with "Chinese _ Simplified".

ProE call:

Rename PROEV. BAT copies VERICUT in the BIN directory under the PRO/E directory. BAT is located in the COMMANDS directory under the WINDOWS directory under the external VERICUT directory to the BIN directory under the PRO/E directory, and then renamed as PROEV.BAT