The practical test content of forklift drivers is divided into pile test and road test. Pile test is to use the specified piles to drive and operate on the site with preset size standards according to the specified driving route (including the specified accessories), and its purpose is to assess the students' ability to safely control vehicles.
The road test is operated according to a specific driving path, and its purpose is to assess students' mastery and application of practical skills and traffic knowledge, as well as their adaptability to the road surface and their ability to deal with emergencies. Among them, the pile test is divided into "8" driving test and "I" driving test. Each item is tested in the form of 50 points and error deduction.
The road test is divided into "qualified" or "unqualified" grades, which are directly determined by the examiner according to the test standards and the actual operation of the assessment object (currently not implemented).
Extended data:
Content of road test:
Evaluation requirements:
Time setting: 3 ~ 4 minutes (mileage is about 1000m).
Road setting: The driving route must include: slopes, intersections, uneven sections, obstacle sections and vehicle turning sections.
Test content: start on a slope; Shift gears; Uphill and downhill; Turn left at the intersection; Driving on uneven roads; Turn around in a narrow section; Stop at the designated place.
Assessment: divided into qualified and unqualified.
One of the following conditions is unqualified:
1, no turn signal or intermittent forward movement and violent beating at the start.
2. The ramp begins to retreat.
3, can't correctly grasp the direction, make the vehicle off the road or "dragon"; One-handed shift, one-handed can not effectively grasp the steering wheel; Excessive turning angle causes the vehicle to deviate from the road centerline.
4. Play the direction in situ; Using semi-linkage to increase the throttle control speed.
5, not according to the succession order leapfrog succession; Serious gear collision noise occurs when the gear is not engaged or engaged; It's in the wrong gear.
6, not according to the road, traffic, load, etc. Rational use of power, grasp the timing of gear shifting, and correctly control the speed.
7. When going to an obstacle section, the vehicle cannot run due to improper operation.
8. Incorrect parking or parking on the road or parking too fast.
9, the engine flameout in the middle.
10, turn around in a narrow section, and you can't finish it twice before and after.
1 1. When turning, you won't turn on the turn signal, and you won't look behind the car through the rearview mirror.
12, reverse the car without looking back.
13. The incorrect choice of meeting place made it impossible for both parties to drive.
14, do not understand traffic signs or violate traffic rules.
15, violating driving safety operation regulations.
16, poor safety awareness, poor foresight and insufficient adaptability.
17, disobeying the command of traffic management personnel or having a traffic accident.
References:
Baidu encyclopedia-forklift driver's license
I planned to go outside on May Day a few days ago, and I have been hesitant to know where to go. I said, why don't we go to