Vertical shooting (3 shots): pixel 4000 x 6000(40 x 80)
Wide angle (9 photos): pixel 8000 x 6000 (1 13 x 80)
180 panorama (2 1 sheet): pixel 8 192x2840 (240 x 76).
Spherical panorama (25 photos): pixel 8192x4096 (360x126,360x180).
The shooting time is related to the number of shots, and the panoramic image synthesized in the machine is in JPEG format. You can also save it as Raw for later use, but this format should be synthesized manually.
Well, without further ado,
step
1, open dji go4, and click Photo Settings in the lower right corner.
2. There are four kinds of panoramic views under the point, and the effect can fly and shoot by itself.
3. After the selection, click on the photo. When you finish taking panoramic photos, the machine will not automatically save them to your memory card. You also need to open Dji's gallery, click on your panoramic photo and download it to your mobile phone.
4. After shooting, click the Dji icon in the upper left corner to return to the home page.
5. Open the photos in the gallery and see the blue circular steps.
6. There will be a white panorama icon in the lower left corner of the panoramic photo preview. Click on the photo, and then download it to your mobile phone to open it. I didn't show it because all my saved panoramas were deleted.
I synthesized the following panorama in raw format on my computer, and the resolution is 1.7 million times 5800.
I'm glad to answer this question. If your DJI doesn't have a one-click panoramic function, you can also take panoramic photos. When the drone is launched, observe the shooting position, avoid the strong wind exit, and keep the drone hovering stably. Set the pan/tilt to zero angle to take the first picture, and remember the last position of the picture (find a reference). Move the joystick to make the UAV rotate to the right around the position of a picture, and the shooting picture overlaps with the last position of the previous picture (that is, the memory point of the reference object), and three horizontal panoramic pictures of a building are taken in turn. When the shooting on the first floor is finished and it is necessary to take pictures downward, the pan/tilt will swing down 30 degrees, move to the left for about one photo position, and then take three photos of the second floor to the left in turn. When shooting the panoramic view of the third floor, the pan/tilt is about 50 degrees downward, and three photos are taken to the right in turn. After taking photos, download 9 photos to the computer PS software, and select all 9 photos at one time to synthesize a complete panorama. I hope my answer will satisfy you!
Please watch my video sharing, thank you.
Yu 2 has its own panoramic shooting function, flying to the position where panoramic shooting is needed, and finding panoramic shooting modes in camera mode, including 180 degree, spherical and other panoramic modes. After selection, press the shoot button, and the camera will shoot 9 pictures, and then automatically synthesize them to complete the shooting. . .
Turn on the shooting function-enter the shooting mode-click on the panorama-and select the super wide-angle panorama function, so that the drone can shoot 9 pictures for later in-machine synthesis, and the works that need high precision and exceed/kloc-0.0 billion pixels need to be shot in RAW format.
Color matching and synthesis of RAW format in computer PS software
The picture effect of the first draft is synthetic, and it will be cut later.
Using PS and other software to debug and synthesize 9 RAW format pictures in the later stage of computer, thus a TIF format picture with more than 700 MB and a picture with more than 654.38+0 billion pixels are combined.