Advanced mathematics, English synthesis, computer technology and its application, physical principles and technology, electrical and electronic technology, metal materials and heat treatment, welding technology, basic knowledge of pressure-bearing equipment, radiographic testing, ultrasonic testing, penetrant testing, magnetic particle testing, new nondestructive testing technology, comprehensive job training, comprehensive skill practice, quality management, etc.
Nanchang Hangkong University is the first undergraduate institution to offer nondestructive testing, and Zhuhai College of Beijing Institute of Technology is the second institution to offer this major, and it is also the first and only institution in Guangdong to systematically train undergraduate talents in nondestructive testing. Xia, a lifelong special allowance expert in the State Council and former president of NDT Association, teaches full-time, and enjoys a high reputation in the field of NDT in China.
What is the major of nondestructive testing?
The professional name is measurement and control technology and instrument (because this is the name of the Ministry of Education for the record and cannot be confused). The professional direction is nondestructive testing, that is, testing direction. I used to focus on the direction of testing instruments, but it was difficult to find a job later. If it is cancelled, it should be the direction of nondestructive testing.
There are many courses, and the specialized courses are mainly five routines (X-ray detection; Ultrasonic testing; Magnetic particle detection; Eddy current detection; Penetration test), basically can't be exposed until the next semester of junior year, before which it was a basic course!
The school used to be called Nanchang Institute of Aeronautical Technology, but now it is called Nanchang Hangkong University.
Remarks: I graduated in 2008. This major is a key major (and materials)! When the school called the roll, it also issued a meal voucher, and the school ate two meals for free! !
Introduction of measurement and control technology and instrument specialty;
This major trains senior engineering and technical personnel who can master the relevant nondestructive testing technology and engage in the research, development, design and application of nondestructive testing technology. This major is a key discipline in Jiangxi Province. The main courses are: circuit analysis, analog electronic circuit, pulse and digital circuit, signal and system, automatic control principle, microcomputer principle and application, single chip microcomputer technology, acoustic detection, surface detection, ray detection and so on.
Students should master information detection, electronic technology, computer application technology and experimental skills, nondestructive testing technology and related information measurement and control technology in industrial production and scientific research. Mainly engaged in the design, research and management of nondestructive testing technology (process and equipment) and quality control.
What is the NDT major of Nanchang Hangkong University?
The professional name is measurement and control technology and instrument (because this is the name of the Ministry of Education for the record, and it cannot be confused). The professional direction is nondestructive testing, that is, testing direction. In the past, there was a direction that focused on testing instruments, but it was difficult to find a job later. If it is cancelled, it should be the direction of nondestructive testing.
There are many courses, and the specialized courses are mainly five routines (X-ray detection; Ultrasonic testing; Magnetic particle detection; Eddy current detection; Penetration test), basically can't be exposed until the next semester of junior year, before which it was a basic course!
The school used to be called Nanchang Institute of Aeronautical Technology, but now it is called Nanchang Hangkong University.
Remarks: I graduated in 2008. This major is a key major (and materials)! When the school called the roll, it also issued a meal voucher, and the school ate two meals for free! !
Introduction of measurement and control technology and instrument specialty;
This major trains senior engineering and technical personnel who can master the relevant nondestructive testing technology and engage in the research, development, design and application of nondestructive testing technology. This major is a key discipline in Jiangxi Province. The main courses are: circuit analysis, analog electronic circuit, pulse and digital circuit, signal and system, automatic control principle, microcomputer principle and application, single chip microcomputer technology, acoustic detection, surface detection, ray detection and so on.
Students should master information detection, electronic technology, computer application technology and experimental skills, nondestructive testing technology and related information measurement and control technology in industrial production and scientific research. Mainly engaged in the design, research and management of nondestructive testing technology (process and equipment) and quality control.
What are the basic courses of nondestructive testing?
Do you mean the courses offered by the school or the basic courses related to nondestructive testing?
The specialized courses offered by Spring University I attended:
1, five testing courses: ultrasonic testing, radiographic testing, magnetic particle testing, penetrant testing and eddy current testing.
2. Non-destructive testing related professional courses: metal materials, engineering mechanics, welding forming, material mechanics, sensor technology, etc. (I can't remember for many years after graduation)
Major in nondestructive testing at work.
Metal materials, welding technology, material mechanics, etc.
To master nondestructive testing technology, we must first learn the basic knowledge of nondestructive testing, such as four routine testing, and then we can learn TOFD testing technology, phased array testing technology, CR, DR and so on.
Non-destructive testing related technologies include metallography, mechanical properties and other related technologies, as well as familiarity with relevant industry standards, laws and regulations. The most important thing is to come down from the scene and learn from it.
I hope it helps you. I am a professional in nondestructive testing, and I am also engaged in nondestructive testing at present. You can v my ndtblog if you have any questions.
Is there a NDT training class in Guangzhou? You must have an authoritative certificate. Is there a NDT training class in Guangzhou? You must have an authoritative certificate.
What institution certificate do you want to take? The special equipment of the Quality Supervision Bureau is on the website of Shishan Training in Foshan, and there is a ray class in mid-April. //gdase/news 1.asp? titleCode=00 100 1。 czzlCode = & ampis detail = 1 & amp； nid= 1062
Mechanical society website
//ndtinfo/hi China/chanese-main page
Classification Society Ray 34345684 in early May
What physical knowledge should graduate students of photoelectric information processing and nondestructive testing learn?
Optoelectronic information science and engineering specialty is formed by the combination of optics, optoelectronics and microelectronics, involving the radiation, transmission and detection of optical information, as well as the conversion, storage, processing and display of optoelectronic information. It is one of the six regular majors of national electronic information specialty.
The photoelectric information science and engineering major of Nanchang Hangkong University focuses on photoelectric testing, and gradually forms the undergraduate construction and research direction with photoelectric testing technology and optical fiber communication as the main body in scientific research.
At present, the photoelectric information science and engineering major in our school has a provincial-level "photoelectric detection technology and instrument engineering laboratory", which is an important part of the "key laboratory of nondestructive testing" of the Ministry of Education. It has two master's degree authorization points of "Optical Engineering" and "Physical Electronics". Among them, optical engineering is a key discipline in the Eleventh Five-Year Plan, a model master and a key discipline in the Twelfth Five-Year Plan.
In the past five years, he has undertaken 7 national natural science funds, 2 basic research projects of the Commission of Science, Technology and Industry for National Defense, 4 national defense science and technology key projects 1, 20 other provincial and ministerial scientific research projects, with research funding of150,000 yuan, won 2 first prizes of provincial natural science, and published academic papers 165438 (. Three textbooks and monographs have been published, and good cooperative relations have been established with many enterprises inside and outside the province, which has played a good role in promoting the development of national defense, regional economy and domestic related industries.
The major of Optoelectronic Information Science and Engineering focuses on cultivating good ideological quality, solid foundation, strong practical ability, adapting to the needs of national defense and economic and social development, having the spirit of innovation and teamwork, having the theoretical and experimental foundation of Optoelectronic Information Engineering, receiving certain professional training in optics and optoelectronic technology, and being able to engage in scientific research, design, technical development and related work in the fields of optical fiber communication and network, optical fiber Internet of Things, optical fiber sensing technology, photoelectric testing technology and instruments, laser technology and optical design.
There are 26 teachers in this major. Among them, enjoy the special allowance of the State Council 1 person, Jiangxi Province's "100 million talents" 1 person, 2 provincial young and middle-aged subject leaders, 3 provincial young and middle-aged backbone teachers, teaching model teachers and top ten teachers 1 person; Doctoral tutor 1 person, 7 master tutor; Teachers with doctoral degrees account for 50%.
Main courses:
Optics, photoelectric detection technology, signal and system, laser principle and application, optical fiber communication technology, optical fiber sensing technology, sensor principle, spectrum technology and application, modern optical testing technology, optical design, electromagnetic field and electromagnetic wave, C language, microcomputer principle and application, circuit analysis, analog circuit, digital circuit, digital signal processing, communication principle, single chip microcomputer technology, embedded system design, semiconductor physics and devices.
Graduates are engaged in technical research, process control management, product development and technical support in the fields of national defense, communication, electronics, aviation, petroleum, construction and transportation, safety monitoring, optical fiber communication system and communication network, environmental monitoring and photoelectric information processing, and photoelectric detection.
What courses does Dalian University of Technology offer for nondestructive testing?
Basic theory course: advanced mathematics; Applied physics; General chemistry; Physical experiment; Linear algebra and probability theory; Complex variable function and mathematical equation; Material mechanics and structural mechanics; Metal physics and fracture mechanics; College English (Scientific English).
Professional basic course: mechanical drawing; Fundamentals of mechanical design; Metal materials and heat treatment and processing technology (this is the combination of two courses, metal materials and heat treatment and metal technology, focusing on the basic knowledge of materials, metal processing technology and the causes and characteristics of various material defects); Electrical technology; Fundamentals of electronic technology; Electrical and electronic technology experiment; Modern enterprise management foundation; Computer principle and application, programming and computer operation; Fundamentals of automatic control; Basic theory of testing technology; Literature retrieval.
Professional courses: acoustic testing (including the physical basis of acoustic nondestructive testing, including ultrasonic testing, acoustic emission testing and other acoustic nondestructive testing); Electromagnetic testing (including the physical basis of electricity, magnetism and electromagnetism, including eddy current testing, magnetic particle testing and other electromagnetic nondestructive testing); X-ray detection (including X-ray physical basis, including radiographic detection, real-time imaging detection and industrial CT); Penetration detection; Visual inspection; Introduction of nondestructive testing methods (including other nondestructive testing methods besides the above, such as leakage detection, infrared detection, microwave detection, optical detection, etc.). ); Introduction of nondestructive testing instruments and equipment.
Practice teaching content: metalworking practice (welding, forging, heat treatment, machining, etc. ); Professional understanding of practice (understanding of the application of actual nondestructive testing technology in the labor process of factory attendants); Professional skills training (practical operation training for ultrasonic testing, magnetic particle testing, eddy current testing, penetrant testing and radiographic testing); Graduation design (combined with the actual production of specific projects, including detection method research, process planning, etc.). ).
Eight measurement and control technology and instruments (nondestructive testing) postgraduate entrance examination
1. The main courses include: radiographic inspection, ultrasonic inspection, electromagnetic inspection and penetrant inspection.
A small number of engineering courses, such as: engineering materials and hot working technology, engineering mechanics, etc.
In fact, there are many courses related to analog circuits and digital circuits, but these courses have little to do with the professional direction.
There are only a handful of universities in China that carry out undergraduate education in nondestructive testing. In short, this is a very unpopular and unknown professional direction.
2. Many courses have the word "basic" or "concise", such as college physics, engineering materials and thermal processing technology, concise theoretical mechanics and material mechanics. These basic courses are the guarantee for you to understand and master the principle or application of complex nondestructive testing technology, and can build a complete knowledge system.
3. After graduation, because we belong to aviation colleges, a large part of our classmates went to aviation military enterprises as quality inspectors, or to civil aviation enterprises or airports for maintenance, and some of them entered special equipment testing institutions or third-party testing institutions. I belong to the last category. I went to a third-party testing agency as soon as I graduated.
In a word, this is a very unpopular major, and all the jobs after graduation are related to the application of engineering technology. It is necessary to learn a lot of technical standard documents, master a lot of practical skills of instruments, and be a coolie for future engineers or construction sites.
I want to teach myself specialized English. Are there any books on nondestructive testing, machinery or welding recommended? !
Abstract plus translation
Professional English, nondestructive testing, mechanical specialty, English, books
Abstract plus translation
What are the courses and books for nondestructive testing major?
Reading alone is of little use.
Need experience
If you want to take the exam, you can go to relevant training institutions for training. No, it's difficult to take an exam from time to time.
If you have any questions, put them in my mailbox.
yuandongf4@yahoo.cn