The original halogen lamp has low brightness, so many people basically choose to modify led lamps with higher brightness. However, it should be noted that most led headlights need lenses, but it depends on the product performance and the design of the original headlights.

Due to the high brightness of led lamps, some products with light beam scattering will have poor lighting effect and astigmatism if there is no lens. However, most led headlights are basically good in light type and strong in light concentration. If the original car is equipped with a reflective lamp bowl, the lamp bowl can ensure the light pattern well, so that the light beam can be emitted in parallel and covered evenly. In this case, it is meaningless to install a lens, but to choose an led lamp with good condensation. If the original car is a lens, it is necessary to choose a lens dedicated to led headlights. Because the lighting principle of lens products is different from that of lamp bowls, the lighting effect will be greatly reduced and shadows will appear.

Car headlights lens modification course

1. Dismantle the headlight assembly, fully heat the sealant of the lampshade with an oven or hot air blower (some can be disassembled directly without heating), then disassemble the lampshade and take out the residual glue;

2. Then remove the original headlights, remove the decorative cover on the surface of the lens, and then remove the lens;

3. Final assembly. Fix the alignment position when installing the lens, and then put the lens back with glue.