Imitation stone paint is one of the most widely used coatings in the construction industry. Simply put, it is a kind of paint that looks like exterior wall stone, which can also be called liquid stone. It gives people a very noble feeling, so it has always been a stone that people like. So what are the construction methods of exterior wall imitation stone paint? What are the purchase methods of exterior wall imitation stone paint? Let me introduce it to you.

First, the construction method of exterior wall stone-like coating

1. According to the construction requirements, the construction personnel should set up safety slings at the parts where waterproof treatment is needed for aerial work.

2. Dig the partially cracked and bulging exterior wall paint to the base of the wall, uncover the cracked paint at the joint between the window frame and the wall, and clean the chipped and fallen wall with a soft brush to ensure that there are no loose particles such as dust, cement slag and loose paint blocks.

And 3, adding the liquid obtained in the step into a mortar mixer, starting the mixer, adding quartz sand and colored sand, fully stirring, and filling into a sealed plastic bucket to obtain the finished product. Before the construction of real stone paint, the surface of the construction base should be treated and primed. During construction, the coating should be evenly mixed, sprayed slowly, evenly and continuously with a high-pressure spray gun, and then painted with a top coat after drying.

Second, the selection method of exterior wall stone-like coating

1. Because the stone uses the natural colored sand of ore, there will inevitably be some color differences between different batches of stone. Therefore, when purchasing real stone paint, it is necessary to estimate the dosage as much as possible, make a good plan, order enough goods to be used in the same batch, and construct the products in the same batch on the same wall to avoid color difference caused by multi-batch mixing and affect the decoration effect.

2. The display effect of real stone paint has a great relationship with the construction technology and spraying level of the construction team. Therefore, the construction service team should be selected for the project, and the construction technology of all construction personnel should be strictly unified. The construction surfaces completed in each stage should be checked and accepted immediately, and the coating defects should be repaired immediately.

Real stone paint is a mixture of colored sand with different sizes. If the particle size distribution used in the formula of real stone paint is unreasonable, the excessive particle size of sand and gravel will easily lead to splashing and rebound. Secondly, improper construction is also an important cause of sand falling. Too large gun diameter, too high gun pressure, too much water in real stone paint and too low viscosity will all cause sand falling and splashing.

Stones are used in buildings. Now the imitation stone paint on the exterior wall is more popular and popular. Then the construction method and purchase method of exterior wall real stone paint are all known through the introduction of Bian Xiao.