First, the origin of safety production knowledge and management ability assessment certificate
? According to the Law on Work Safety, the Decision of the State Administration of Work Safety on Abolishing and Amending Ten Rules in the Fields of Labor Protection Articles and Safety Training (Order No.80 of the State Administration of Work Safety) and other laws, regulations and work needs, the State Administration of Work Safety has formulated the Model Certificate of Safety Production Knowledge and Management Ability (attached), which is hereby issued, and the relevant matters are notified as follows:
1, this style is suitable for the production, management and storage units of dangerous goods, as well as the main person in charge and safety production management personnel of mining and metal smelting units, and will issue certificates after passing the examination of safety production knowledge and management ability according to law.
2, production safety knowledge and management ability assessment certificate by the competent department responsible for production safety supervision and management according to the unified style printed by themselves.
3. Notice of the General Office of the State Administration of Work Safety on Printing and Distributing the New Safety Qualification Certificate (No.37 [2006] of the State Administration of Work Safety) shall be abolished at the same time.
Two, safety production knowledge and management ability assessment certificate style
(1) Appearance standard
1, card holder material: PVC.
2. Specification: 85.5 mm×54 mm, thickness 0.8? Hmm.
3. Surface printing: The background is "State Administration of Work Safety" in state administration of work safety, with light green printing. Fixed information is printed in standard bold.
4. Photo: A half-length bareheaded color photo with a dark coat and a white background. The file format is JPG or JPEG, the file size is less than 20KB, and the aspect ratio of the photo is 5:4.
5. Seal: a round red seal with a diameter of 18 is adopted. Mm, probably 1/3 pressed into the lower part of the photo when printing. The seal can be made by scanning input or software, and the seal should be a transparent graphic file to prevent the photo from being covered.
6. Surface layout: See figure 1. 1 and figure 1.2.
Figure 1. 1? Front layout
Figure 1.2? Back layout
(2) Fill in the explanation
1. ID number: fill in the holder's resident ID number. If you don't have a resident ID card, such as a soldier, change it to the number of a valid and legal ID card.
2. Fill in the name and gender truthfully. The name and gender must be consistent with the information recorded on the holder's identity document.
3. Fill in coal mines, metallic and nonmetallic mines, offshore oil and gas exploitation, onshore oil and gas exploitation, hazardous chemicals production, hazardous chemicals management, hazardous chemicals storage, fireworks production, fireworks management, metal smelting, etc.
4. Date of first collection: fill in the time when the holder first received this kind of certificate. The format is yyyy-mm-dd, such as: 20 15-07- 16.
5. Validity Period Fill in the valid start and end dates of the certificate. The unified format is yyyy-mm-dd to yyyy-mm-dd, such as: 20 15-07- 16 to 20 18-07- 15.
6. The issuing authority shall fill in the name or specification abbreviation of the competent department responsible for the supervision and administration of production safety.