1. Find the parts of the chassis and assemble them. Note that it is only the bottom part. Some have shoe racks, which should be installed first.

2. After assembling the panel, please ensure that the diagonal error of the cabinet is within plus or minus 1 mm..

3. After the diagonal measurement is completed, please mark the position of the back plate nailed by the laminated plate or the vertical plate on both side plates for nailing the back plate.

4. After the cupboard is put away, please measure whether the cupboard is level with a spirit level. If not, please adjust to the horizontal position. The common method is to put something under the cupboard.

5. After the cabinet is horizontal, it can be installed in turn: clothes rail, drawer, door panel or sliding door, telescopic vanity mirror and handle can be installed according to customer requirements.

6. Don't put all the other shelves on, put the plastic on first. Open the plastic zipper, the sticky place in the middle is also opened, and the bottom is facing down. There are some small holes dug at the bottom of the plastic sheet. According to each hole, the plastic is pulled down along each vertical pipe from top to bottom. You can't pull it to the bottom first, and the rest of the pipe should be packed in plastic.

wardrobe

The wardrobe consists of a cabinet, a door panel sliding door or a horizontal door, a hardware tie clip, a drawer, a basket, a clothes rail, a laminated button, a trouser rack, a mirror, a hinge and the like. General wardrobe cabinets are made of 18mm thick materials, such as particleboard, density board, solid wood board, composite multilayer board and finger joint board.