Model essay on the annual work summary report of experimenters in 2022 1. This year, there were difficulties and gains. The result of serious work is to fulfill personal responsibility and strengthen one's ability. This work is briefly described as follows:
I. Politics and ideology
With a strong sense of ownership, we should start from doing our daily work well, from me, from now on, and make unremitting efforts to make achievements in our work. I will constantly improve my work, master my work knowledge, be the backbone of my work, and do my work well in a down-to-earth manner.
Second, the work attitude
No matter at work or in life, I always believe that no pains, no gains, so I have been working hard, studying hard and working hard. Loving work can make me treat every job, devote myself wholeheartedly, go to work on time, make effective use of working time and stick to my post.
The construction period is tight, there are few people and many experimental projects. Being able to follow the work, ensure that the test task is completed on time and the engineering test is carried out smoothly, which embodies the strong hands-on ability of our experimenters and carries forward the spirit of continuous work and hard struggle of our experimenters.
Third, job responsibilities
Conscientiously implement the national guidelines and policies on standardization, quality management system, product quality supervision and inspection, research and development, etc., and fulfill the relevant standards, experimental methods and regulations of engineering products that are responsible for supervision and inspection in this position, so as to ensure that every inspection has rules to follow.
Do a good job in entrustment acceptance, project investigation, data and feedback, and keep a tracking ledger for future reference.
Because there are many test items, the test time of the items is different, so it is necessary to do a good job in advance to avoid the delay of the construction period and the impact on the progress because the technical personnel of the construction unit do not understand the engineering test requirements and technical indicators. As an experimenter, we should carry out the quality policy, implement the quality objectives, abide by the rules and regulations, and serve the construction site wholeheartedly.
Fourth, specific work.
My job is mainly to experiment and test some civil engineering materials (cement, sand, gravel, steel, water reducer, etc.). ) and finished products (steel weldments, concrete blocks, etc. ); Participate in concrete mixing experiment: supervise concrete mixing in mixing station; Control site concrete and backfill soil, etc.
When I first joined the work, the first thing I came into contact with was the inspection of soil replacement. Although replacement soil is simple and boring, most people think it is not replacement soil. What can I do? But I worked for a while, but things were not that simple:
Starting from the material requirements of soil, the types of soil and its control indicators: where to replace the fill, where to replace the crushed stone or 3: 7 lime soil should have technical indicators, and the selection of replacement tools: are the conditions before replacement and filling available?
Whether the foundation strength meets the specified requirements, the minimum dry density, virtual paving thickness and compaction coefficient of soil materials have been determined, and the backfill compaction can not meet the requirements, which will cause landslides, subsidence and even greater harm.
Therefore, before other materials that I gradually came into contact with were tested, what I had established in my heart was not so simple that there could be no ambiguity.
Contact more project tests in the laboratory one after another, clarify the working procedures, and form a relatively complete idea in specific work, so as to carry out the work smoothly and complete the work skillfully and successfully.
(1) control of raw materials: each batch of raw materials entering the site must have the manufacturer's quality guarantee and inspection report, and each batch of raw materials must be inspected according to the specified quantity.
(1) For cement, when bulk cement warehouse is used, it is forbidden to mix cement from different manufacturers, varieties and labels. When using bagged cement, protective measures should be taken to prevent cement from caking due to moisture. When the cement is used for more than three months, the laboratory should be contacted in advance to recheck the actual label of the cement.
(2) Sand and gravel shall not be mixed with foreign bodies and coal dust. In particular, it cannot be embodied. When raw materials are found to be inconsistent or abnormal with the samples, they should contact the laboratory in time for a second interview, so as not to affect the construction progress. All raw materials entering the site must be debugged in time, and the cement experiment adopts 3D strength and 28D strength, sand, stone, etc. The experimental report will be issued within 24 hours after the laboratory debugging. All materials to be tested must be reported by the laboratory before they can be used. That is, the principle of inspection before use, otherwise it will be regarded as unqualified products and prohibited from being used in engineering.
⑵ Soil replacement control: Before soil replacement construction, the construction department should fill in the soil replacement entrustment form truthfully, and the construction should be carried out according to the drawings if there are design requirements, and the construction should be carried out according to national standards if there are no requirements. The water content of the soil material selected for replacement construction requires the best water content, and the soil spreading thickness of each layer shall be compacted in layers according to the specification requirements, and shall not be rammed without leakage, and shall be accepted step by step. After the experiment is qualified, the next step can be replaced, and the unqualified parts can be reworked.
(3) Concrete engineering: Concrete and mass concrete with special requirements should be entrusted in advance, and can be opened and identified. When mixing concrete, we should strictly implement the mixture ratio, control the slump and workability, and make records of mixing and production control. If the volume is large, the laboratory should be notified in time for dynamic adjustment.
When using fly ash, environmental pollution should be avoided or reduced. The concrete transported to the construction site by the mixing station shall be made into test blocks in time. The laboratory will evaluate the concrete output of the mixing station according to the grade, batch and time of the concrete produced by the mixing station. The safety and reliability of concrete components such as beams, slabs and columns made of concrete have a certain guarantee foundation.
(4) For the reinforcement project: for the reinforcement entering the site, it is required to have the basic information such as the manufacturer's quality certificate and bill of materials, and then send it for re-inspection according to the batch, specification and quantity at the first time, so as to obtain the experimental results in time and not affect the construction progress.
For unqualified steel, double re-inspection shall be carried out in time, and it can only be used after the experimental report comes out. If it is still unqualified, it shall be withdrawn in time. For qualified steel, do a good job in the experimental account for review and check.
5] For other materials, such as waterproofing materials and water reducing agents, materials should be collected in time and rechecked according to the experimental regulations, and the experimental account should be kept, and it can be put into use only after the qualified report is obtained.
When I first arrived in the project department, I knew little about the experiment. With the help of my colleagues, I quickly put myself into my work, constantly demanding myself and constantly urging myself to improve.
As an experimenter, I dare not slack off in my work. I ask myself to write down the gains and losses in my work and the problems that appear every time as a lesson. When I encounter problems or difficulties in my work, I will consult my colleagues and leaders and listen to their opinions and suggestions patiently.
Because my department only works in a small circle most of the time, I can't just sit back and wait. I want to contact the foreman and technicians in time to understand the engineering procedures and steps, so as to better serve the work in the future.
In 2022, the annual work was summarized and the experimenter reported that time passed quickly, and five months passed quickly. We have also changed from an immature child to an independent social person. Here, thank you for your concern and your guidance.
As an experimenter, I think the most important thing is to seek truth from facts and be serious. Do every test well with strict details and responsible ideas, adhere to all data, reflect the characteristics of physical objects with standardized operation and accurate results, and provide reference for construction. First of all, summarize this year's work:
I signed an internship agreement with the company in May, and reported to the project department on July 1. Because theory and practice can't go hand in hand at first, there is always only the outline of theory without practice, so I can't finish the task assigned by the leader efficiently and accurately, and I can't finish an experiment independently. After a while, I don't have to let the old comrades carry it all the time. I can finish it alone. To the back, mainly responsible for on-site detection of concrete rebound strength and protective layer, to provide raw data for the information.
Through a period of work, I gradually found my own shortcomings and improvement methods:
1. The theoretical knowledge is so poor that the knowledge in school textbooks is totally insufficient. We must take advantage of the opportunity to learn more in the future;
2. Inexperience, many test items are not judged, and it is impossible to objectively test and get accurate data, so you must read more books, think more and listen more, and accumulate experience in the future.
Future work plan:
1. Seriously do what the leader tells you, finish the task in the first time, and finish the work arranged by the leader with high efficiency and high quality.
2. Be responsible for your own work, do not make false information, ensure that the data is reliable, scientific, fair and accurate, and be strict with yourself; Be responsible for the people around you, cultivate the spirit of unity and cooperation, and do your best to complete the task.
3. Upgrade, upgrade professional level, and upgrade personal accomplishment.
Finally, I firmly believe that hard work will pay off, strive to improve myself, don't give up learning opportunities, correct shortcomings, find problems and solve them perfectly.
In 2022, the annual work summary, experimenter, model essay report. In the past year, our central laboratory, under the leadership of the competent leader, worked hard to serve the construction and production of various projects and successfully completed this year's work. The personnel and work of this department are summarized and reported as follows:
I. Personnel situation
The central laboratory has four staff members, including a director, two deputy directors and a clerk. The specific division of labor is as follows: Li Maojie is in charge of the overall work, Shenyang University is the laboratory director, and Yang Li and Wang Jie are the laboratory directors of Jim and Outer Ring Project respectively. After the Jim project, Yang Li was transferred to the Shenyang-Dalian project. Ma Libo is responsible for the management of test instruments and other daily work.
Second, the work situation
After various projects started this year, the central laboratory determined the mix design of asphalt concrete and cement concrete for Jim, Shang 'a, Hebei, Outer Ring and other projects, providing basic data on construction quality and rational use of various materials.
During the construction period, under the assignment of department leaders, two deputy directors and I were stationed in Shenyang-Dalian Project, Jim Project and Outer Ring Project as laboratory directors to be responsible for the testing and inspection of these three projects. A lot of work has been done in asphalt concrete target mix design, construction mix design adjustment, test, standard implementation, owner inspection and so on, and satisfactory results have been achieved.
During the winter vacation, we also combed, summarized and filed the equipment and use of testing instruments in various projects, in order to prepare for the unified management, rational use and deployment of testing instruments. At the same time, we began to apply for the qualification of the central laboratory and strive to pass the second-level certification.
Third, provide reference information for leadership decision-making
The central laboratory and its personnel stationed in various projects provide accurate construction mix ratio through quality inspection of different material sources, provide decision-making basis for project leaders in material source selection, procurement quantity and cost management, and pay attention to useful information of inspection and testing of new methods and new instruments for reference, provide leaders with working ideas of their own departments in time, and provide suggestions for leaders' decision-making.
Fourth, educate people, promote people and educate people.
First of all, during winter training, the central laboratory assisted the engineering department in training inspectors and testers, and the central laboratory compiled training materials and I gave lectures, which played a certain role in improving the working skills of our testers.
In addition, during our tenure as the director of the laboratory in each project, we taught the testers in inspection, testing theory, testing methods and instrument operation, focusing on cultivating positions with good foundation and recommending them to the project leaders for full development. After training, several people have begun to take shape in technology.
Shortcomings and shortcomings of verbs (abbreviation of verb)
1, there are too few laboratory personnel, and the personnel stationed in various projects are often unable to provide effective services for other projects because of their busy work.
2. The laboratory lacks effective qualification, and its test report cannot be recognized by all parties. All projects still need to be outsourced to other units, resulting in waste.
Thoughts of intransitive verbs on future work
First of all, strengthen the application for the qualification of the central laboratory and strive to pass the certification; Secondly, strengthen the unified management of all testing instruments and rationally allocate and use them; Thirdly, strengthen the training of testing personnel so that the central laboratory can fully serve the project and play its role.
The above is a summary of the work of the central laboratory in the past year, and the shortcomings remain to be criticized and corrected by leading comrades.
Summary of the work in 2022, the experimenters should establish the idea of serving teaching, study the relevant materials of teaching materials and teaching instruments, be familiar with the performance of various instruments and equipment, the knowledge of users and keepers, and master the maintenance and basic skills of instruments, which will eliminate the general faults of instruments and ensure the normal, effective and safe experiment.
2. Seriously and responsibly do a good job in laboratory planning management, accounting management, equipment management, data management and experimental teaching, and report the situation to the competent department in time.
3. Understand and master the teaching work plan and experimental plan of each grade, prepare for the experiment as planned, and prepare the instruments and materials needed for the experiment in time according to the requirements of the experimental notice, so as not to delay the experiment. The experimental instruments of grouped students must be checked in advance to avoid bringing difficulties to students' experiments, and they should stick to their posts in the experiments.
4. Responsible for the use records of laboratories and experimental instruments, as well as the sorting and keeping of the use records. Tutor students in the experiment, check and arrange the instruments after the experiment, and deal with problems in time when they are found. For the damaged instruments in the experiment, the compensation system should be strictly implemented according to their different properties.
5. Actively cooperate with schools and relevant teachers to make and reform teaching AIDS, open laboratories, carry out extracurricular scientific and technological activities, and give full play to the multifunctional role of laboratories.
6. Take good care of experimental supplies. At the end of each semester, instruments, reagents and medicines are cleaned and sealed. , to ensure that the accounts are consistent with the facts, and to prepare the procurement plan for the next semester; And complete the temporary work of the guidance office.
7. Strictly implement the commuting system, carefully check attendance, not be on duty or leave the post during working hours, conscientiously implement the rules and regulations of the laboratory, do a good job in safety protection, strengthen the management of dangerous goods, prevent fire, guard against theft, save water and electricity, clean the laboratory regularly, and keep the laboratory clean and tidy inside and outside.
8. Biological experimenters undertake the management of the biological park.
In 2022, the experimenter's annual work summary report shows that the old year is about to pass and the new year is about to begin. We will usher in a brand-new 20xx year. Over the past year, during my stay in Hebi, I have gained a lot and grown a lot.
This year is summarized as follows:
First of all, at work
This job has changed my analysis of coal quality from a conceptual thing to a real contact. It has brought me into a whole new and vast field. After I really engaged in coal testing, I found that what I learned from books was far from enough. To master this subject, we need a lot of practice summary and theoretical research. Here I learned the determination of moisture, ash, volatile matter, sulfur, hydrogen and calorific value of coal. These routine tests seem simple, but it takes some thinking to do these simple tasks well. First of all, these projects must be done in strict accordance with the requirements of the national standard. Secondly, when weighing water, the cooling time should not be too long or too short. The two cooling times should be consistent as far as possible, and the rapid ashing should be slow to prevent the coal sample from deflagration. During volatilization, two parallel samples should be kept, the burning time should be the same, and the crucible cover should be tightly covered. These measuring points, seemingly single, are actually interrelated organisms. According to these special results, we can guide the proportion of coal used in coking or power plants.
Second, in life.
Coal quality analysis is a brand-new thing for me. At first, the strangeness everywhere was the enthusiastic help of colleagues, and the careful teaching of the master made our team skillfully do this job. Here, I have gained knowledge and friendship with my colleagues.
Third, shortcomings in the work.
1, learning enthusiasm is not very high.
2. Although you can do routine projects, you can't solve instrument problems independently.
3. The knowledge system has not been fully established.
4, the determination of ash melting point and colloidal layer, more than others.
5. Some characteristics of coal have not been summarized.
Fourth, improvement measures.
1, make a study plan, learn by yourself or ask colleagues for advice if you don't understand.
2. Colleagues repair instruments, see more, ask more and move more. Next time you encounter this kind of problem, try to solve it independently.
3. In the process of reading, summarize and write down the same type of knowledge together to establish a knowledge network.
4, practice measuring ash melting point and colloidal layer, and strive to learn to determine as soon as possible. 5. When making coal samples, make more summaries, remember them repeatedly, and strengthen your own operation.
Conclusion: the weather is not as good as the geographical position, and the geographical position is not as good as human harmony. Unity is strength. Only by uniting can we form a joint force. Assist leaders to broaden and unblock democratic channels, consult with you if there is anything, listen to comrades' opinions humbly and sincerely, be strict with yourself, treat others sincerely, put yourself in the shoes of colleagues, and strive to create a relaxed, harmonious and pleasant working environment. Strive to create a working atmosphere of mutual trust, mutual assistance and peace of mind. In the new year, I will study harder, improve my operational ability and strive for the upper reaches. Contribute to the work of Ke Sheng and the development of the company. May Ke Sheng Electronics become more and more brilliant.
In 2022, the annual work summary, experimenters, and report 6 model articles. First, job responsibilities.
I managed the computer network and established a training room and a computer maintenance training room. As a laboratory administrator, in order to ensure the normal operation of students and improve the utilization rate of the computer room, I have done the following work:
1, because the equipment in the computer room is relatively old, there are many small equipment, and the stability of the machine is poor, so it takes some time to maintain and prepare the equipment before the training class, so as to ensure the normal operation of the students.
2. In the process of computer operation, make a good record of the operation of the machine, urge the students in the computer room to make a good record of the operation of the computer equipment, and at the same time do a good job in the repair and maintenance of the machine.
3. Supervise students to do a good job of cleaning the computer room once a week, which ensures the cleanliness and neatness of the computer room and provides students with a good computer environment.
4. Maintain the power supply, curtains and other items in the computer room, timely repair or report problems to the logistics department, and do a good job in anti-theft and fire prevention in the computer room on weekends or holidays. 5. I have mastered the use of the equipment in the training room I am responsible for, and also mastered the use of all the equipment in the notebook maintenance training room and other training rooms.
Second, the task
While managing the laboratory, I also undertook the theoretical and practical teaching tasks of "Laptop Computer Maintenance" and "Computer Maintenance Tools", and also participated in the internship guidance of other courses, actively participated in the construction of the new training base, and mastered the new knowledge and technology in the construction of the new training base.
At the same time, I also realized the importance of the laboratory in the whole teaching process and improved my rigorous consciousness in my usual work. It laid a solid foundation for the future work and improved the working ability. It not only increased the relevant professional knowledge and improved the level of scientific research, but also completed the scientific research tasks required by the college every year.
Work-integrated learning, this summer, according to the arrangement of the college, I went to Xinpeng Computer Maintenance Company for a one-month internship, mainly engaged in mainboard maintenance, notebook computer maintenance and LCD monitor maintenance. In practice, I have mastered the judgment methods and maintenance of different computer components, thus improving my own maintenance technology. After work, I exchanged in-depth maintenance experience with foreign teachers, taught myself courses such as motherboard maintenance and monitor maintenance, and did limited maintenance myself.
Third, work standards.
After work, I instruct more than a dozen students to engage in computer repair and maintenance, network management and other work in laboratory posts every year, which enhances students' practical ability, enables students to adapt to their jobs in advance, and improves their employment competitiveness. This semester, students from outsourcing technical service center have been led to the electronic department and the computer room of Banan campus for technical guidance and maintenance services.
During my tenure as laboratory manager, I obeyed the arrangement of leaders and colleagues, and earnestly completed all tasks assigned by leaders. I was United with colleagues in my work, seeking truth from facts, optimistic, and always maintained a rigorous and serious work attitude and meticulous work style, diligent and tireless.
Always be honest and diligent, be able to treat every job correctly and seriously, serve teachers and students enthusiastically, go to work on time during work, and stick to your post. In terms of scientific research, this year, I participated in the compilation of a textbook for the Twelfth Five-Year Plan, which was published in public and published 4 papers, including 2 alone.
Fourth, shortcomings.
1. There is little communication with leading colleagues at work.
2. Personal scientific research needs to be further improved; There are not many creative works, and some works are not perfect enough, which need to be improved in the future work.
2022 annual work summary, the experimenter reported that from July 20xx, Model No.7 came to work in the company and worked as a laboratory concrete technician for nearly half a year. He has worked and studied in the positions of experimenter, concrete inspector and concrete technician. Through the training of these technical posts, thanks to the care and training of department leaders, serious teaching and the enthusiastic help of colleagues, my working ability has been improved rapidly in a short time. Through the team's concerted efforts in Qi Xin, I have found some work experience, thanks to the help of the company and the support of my colleagues. The following is a summary of my work in the past six months. Please give me guidance and correction:
I. Main work contents
1, participate in the sampling and sample preparation of commercial concrete before leaving the factory, and clean up the mold test;
2. Coordinate, handle, reflect and report the construction, technology and quality of commercial concrete on site;
3. Be responsible for testing, appraising and recording the strength and durability of commercial concrete test blocks, and register the account for the import and export of commercial concrete;
4. Participate in the testing, adaptability test and mixture ratio adaptability test of commercial concrete raw materials.
Second, work experience
1, details determine success or failure, and we should face every detail seriously in our work;
2. Responsibility is very important. At work, we should be responsible for our words and deeds.
3, make full use of time, a person's time is limited, we must learn to achieve the best results in the shortest time;
4, attitude determines everything, work hard, be serious, only down-to-earth work can get the corresponding reward;
5. Cooperation with others and team spirit can make us get twice the result with half the effort and make our work develop better.
Third, shortcomings
1, lack of work experience and unreasonable work arrangement;
2. The knowledge system is not complete enough, and it needs to be learned and accumulated slowly in future work and practice;
3, the overall consciousness is not strong enough, and sometimes the problem is not considered enough;
4. You can't master the communication and communication skills well in the interaction with people;
5. In dealing with people, sometimes I am a little naive and don't know how to be flexible.
Fourth, planning.
1, continue to broaden one's theoretical knowledge, strengthen one's application of theoretical knowledge, consult more documents when encountering problems in daily work, and be familiar with relevant knowledge, so as to improve one's ability to solve practical problems;
2. Strive to pass the concrete inspector certificate examination and obtain the title of assistant inspection engineer.
Generally speaking, all the tasks assigned by the leaders have been successfully completed. Over the past six months, I have made continuous progress, my professional knowledge and skills have been enhanced and deepened, and my work ability, organization and cooperation ability, management ability and adaptability have been greatly improved. More importantly, I have accumulated work experience. The work performance in the past six months has also been recognized by department leaders and colleagues.
Looking forward to 20xx, there will be more new challenges in my work, and I will do my best. In the future work, I will meet new challenges with full enthusiasm, make continuous progress and maturity in my work and study, and contribute to the development of the company!
In 2022, the annual work summary, experimenter, newspaper model essay. Over the past year, with the correct leadership and care of school leaders and other teachers, his work has been successfully completed. Let's summarize it from two aspects:
First, study.
1, which strengthens the study of business theory.
2. Strengthen the study of political theory.
3. Participate in various trainings and exams.
Second, the work.
1. Since this year, I have carried out a general cleaning of the two rooms. In the first two weeks, I sorted out and checked all the instruments in the instrument room, and accurately grasped the number of various instruments and equipment to facilitate the needs of future classes. On the other hand, further improve the borrowing system and register the borrowed instruments and equipment.
2, conscientiously do a good job in daily work:
(1) monthly statistics instrument number;
(2) There are documents on it, which need to be classified into books.
3. Help teachers in all subjects to prepare necessary instruments for each experimental class.
4, do a good job of laboratory system management. For example, before each experiment class, the teacher should conduct preliminary experiments to confirm the success rate and safety of the experiment and ensure that the students' personal and health will not be harmed.
5, before the end of this year to conduct a comprehensive inventory of instruments, found that the problem in a timely manner.
In short, over the past year, I have gained a lot through hard work and continuous exploration. I firmly believe that I can do it well as long as I work hard.
Summary of work in 2022, experimenter, report of Fan Wen for 9 academic years. I was a chemistry experimenter when I was teaching chemistry. In this case, I still performed my duties as an experimenter well. The summary is as follows:
A, can strictly abide by the rules and regulations of the school, schedule can be timely and accurate in place, leave can be listed or explained to other teachers.
Two, in the case of the relevant teachers to inform the experiment in advance, carefully prepare the instruments, materials, tools, medicines, etc. Required by the experiment, and ensure that students can start the experiment in time and accurately. In the process of students' grouping experiment, it can help teachers to do a good job of guidance and inspection, and ensure the smooth progress of the experiment.
Third, laboratories, instrument rooms and studios can be cleaned frequently to ensure the cleanliness of the working and experimental environment. At the same time, the instrument is often cleaned and inspected to ensure timely maintenance and repair. The loss of instruments and the registration and cataloging of new instruments are also well done.
Four, made a purchase plan, and can timely report to the school, the guidance office to observe the laboratory rules and regulations of each class, can timely implement and check the registration, and timely report to the leaders of the teaching and research section of physics and chemistry students. For classes with poor performance, help them formulate measures and rectify them in time. At the same time, they can also participate in the teaching activities of the teaching and research group in time.
Five, love their jobs, can manage all the property of the laboratory, escort for teaching activities.
In the future, I will make persistent efforts to build a better chemistry laboratory!