At present, the Road and Bridge Department has five majors: highway and bridge, advanced highway maintenance management, highway and urban road engineering, port and waterway engineering technology and construction technology. Every major has Chinese courses, high-tech courses and technician courses. 1997 highway construction and maintenance major was approved by the Ministry of communications as a-level major, and 1999 road and bridge major was rated as the first batch of key majors of the national traffic system technical school. 20 10 highway construction and maintenance specialty and highway engineering survey specialty were rated as demonstration majors in Jiangsu province.
1, major of highway construction and maintenance: it mainly trains senior engineers and technicians in highway construction inspection. After graduation, you can go to highway construction enterprises, supervision companies and other units to engage in road and bridge engineering design, construction, test and management.
2. Engineering cost specialty: Engineering cost specialty trains advanced technical application-oriented talents with good scientific literacy, basic knowledge of engineering cost, familiarity with the whole process management of engineering cost and strict practical skills training, focusing on the preparation and control of engineering cost in construction stage. Engineering cost graduates are mainly engaged in engineering budget, engineering settlement and final accounts, engineering audit and valuation, quota preparation and management in construction stages such as construction, installation and municipal administration. Can also be engaged in industrial and civil construction and organization management, project supervision, project bidding and project management.
3. Highway supervision specialty: refers to the cultivation of advanced technical application-oriented professionals who have the necessary theories and skills for highway supervision specialty and can engage in highway, bridge and tunnel engineering or highway quality, construction and contract management. The cultivation of highway supervision has good scientific literacy, grasps the basic knowledge of highway supervision, is familiar with the whole process of highway engineering supervision, and has undergone strict training, and has professional and advanced technology applied talents.
4. Architecture major: engaged in production operation, technology and management of industrial and civil construction project management, foreman builder, budgeter, material engineer and quality engineer.
5. Railway engineering, railway maintenance and urban rail major: train senior engineers for railway road engineering inspection, and engage in railway engineering design, construction, test, inspection and management; The employment direction is railway construction enterprises and operation management departments.
6. Road and Bridge Engineering Technology Major: It is a major to train advanced technical application-oriented professionals who have mastered the basic theory and knowledge of road and bridge engineering, have post professional ability and are engaged in the front-line technology and management of road and bridge engineering. The employment direction is mainly oriented to the highway transportation department, engaged in technical and management work such as survey and design, test and inspection, maintenance and repair of highways, urban roads, bridges and tunnels. Others: engaged in technical and management work such as survey and design, test and inspection, maintenance and repair of highways, urban roads, bridges and tunnels for highway transportation departments.
7. Engineering Survey Technology Specialty: Focusing on the training objectives of professional schools, the engineering survey technology specialty cultivates high-skilled talents who have all-round development in morality, intelligence, physique and aesthetics, master the basic theories and skills of surveying, and can engage in all kinds of engineering survey, cadastral survey production, management and service. Graduates are engaged in the design, construction, organization and management of survey projects for surveying and mapping, water conservancy and hydropower, urban construction, roads, bridges, industrial and civil buildings, land management and other departments.
There are 74 employees in our hospital, including 6 with senior titles, 6 with intermediate titles 16 and 9 with master's degrees, who are engaged in teaching and experimental testing. Our department has a team of teachers with solid professional theory and rich practical experience. Among them, there are 2 outstanding professional leaders of national transportation secondary vocational education, 4 professional leaders of national transportation secondary vocational education, 4 national transportation technical experts, 2 famous transportation system teachers in Jiangsu Province, 2 senior technicians with outstanding contributions in Jiangsu Province, 8 senior titles, 3 intermediate titles 13 and 32 master's degrees. There are more than 2200 students in the school.
In order to meet the requirements of "strengthening students' skills training", our department has made every effort to build a team of double-qualified teachers, and now has 6 senior technicians and more than 20 technicians. In order to meet the requirements of "strengthening students' skills training" and meeting the needs of test and detection work, 16 people in our department have obtained the qualification of highway engineering test and detection engineers of the Ministry of Communications, and more than 50 people have obtained the qualification of testers. Road and Bridge Department has established a relatively perfect training base, with more than 2,000 square meters of teaching and practice places for various majors and 5 multimedia classrooms. Each project has 8 sets of test equipment and more than 20 sets of measuring instruments. Since 1992, in order to strengthen the quality supervision of traffic engineering construction and improve the level of highway and waterway engineering inspection and budget estimation, Jiangsu Provincial Communications Department has held regular post training courses for inspectors, supervisors, cost engineers and builders in the province every year. As a staff education and training base under the department, our school should seize the opportunity, seize the market, and take it as its responsibility to deliver more outstanding talents to the society. Over the years, it has worked closely with the Department of Quality Supervision Station to do a good job in teaching organization and logistics support of various training courses, and has become one of the trusted training bases of the Department of Quality Supervision Station.
The testing center is a Grade-A qualification laboratory for traffic engineering of Jiangsu Provincial Communications Department. It not only undertakes the normal experimental practice teaching tasks of the school, but also is the testing center of the traffic engineering quality supervision station of the Provincial Communications Department, and is responsible for the quality testing and acceptance of key traffic projects in the province. At the same time, it is also the testing center of the provincial highway construction headquarters and the testing center of the highway bureau of the provincial communications department, and undertakes the intermediate quality inspection and acceptance of expressways, rural roads and networked access projects in the province. Our laboratory also independently undertakes various external entrusted testing services. Mechanical and electrical engineering is the first major offered after the establishment of our hospital. After more than 30 years of development, department of mechanical engineering has become a backbone teaching department integrating teaching, production and scientific research. Department of mechanical engineering has powerful teaching facilities and equipment, including engine comprehensive laboratory, chassis comprehensive laboratory, hydraulic and hydraulic transmission comprehensive laboratory, electrical equipment comprehensive laboratory, fuel system laboratory, numerical control programming laboratory, machining workshop, fitter training room and other experimental practice teaching places, as well as bulldozers, loaders, excavators, rollers, cranes, large-scale road milling machines and other equipment. The experimental practice site covers a total area of 5,000 square meters, and the total amount of supporting equipment is more than 20 million yuan. The number of students in school has reached1more than 500.
1, mechatronics major: to cultivate high-quality, high-skilled and applied senior professional and technical personnel engaged in the use, maintenance and repair of electromechanical equipment and equipment management and design. Courses offered include: electrician foundation, electric drive control circuit and skills training, fitter technology and skills training, lathe technology and skills training, CNC machining foundation, programmable controller PLC and its application, electronic assembly, tolerance fit and technical measurement, metal materials and heat treatment, mechanical foundation, mechanical drawing, mechanical manufacturing technology foundation, electrician and electronic technology foundation, electromechanical integration technology, etc. Electromechanical integration technology has a wide range of applications and many jobs. After graduation, students can engage in the operation, maintenance, installation and debugging of electromechanical equipment, the design and transformation of electromechanical integration equipment, production management and technical management in the corresponding enterprises and institutions.
2. CNC Machining (CNC Lathe) major: This major trains compound high-tech applied talents who master the basic theories, methods and skills of mold design, CAD/CAM, mold manufacturing technology, mold CNC machining technology and programming, and modern workshop production management. , and engaged in sheet metal stamping, plastic molding die CAD/CAM and other modern manufacturing work. Main courses: mechanical drawing, mechanical design foundation, electrical and electronic technology foundation, mechanical manufacturing foundation, cold stamping process and mold design, plastic molding process and mold design, mold CAD/CAM, mold NC machining, industrial enterprise management and technical and economic foundation, computer application, etc.
3. Mechanical design, manufacturing and automation major: this major cultivates advanced applied technical talents with professional theories and skills such as machining process planning and fixture design, NC machining programming and operation, modern manufacturing technology basic theory and modern production management, and can be competent for machining process planning and implementation, NC machine tool operation, computer drawing and auxiliary design in the mechanical manufacturing industry. Professional employment has a wide range and strong adaptability. Main courses: mechanical drawing (CAD), mechanical design foundation, electrical and electronic technology foundation, computer application foundation, mechanical manufacturing technology and fixture design, numerical control programming, machine tool electrical control technology, modern manufacturing technology, production management, etc.
4. Operation and maintenance of road machinery: for large and medium-sized construction enterprises such as city and county highway bureaus and road and bridge companies, they are trained to drive, operate, maintain, maintain and repair road machinery.
5. Electrical Automation Technology Major: This major aims to cultivate all-round development of morality, intelligence and physique, and to be familiar with automatic control theory and electronic technology, as well as the production technology and facilities of electrical, electronic and electromechanical integrated equipment, equipment operation and maintenance, technical transformation, research and development, production, after-sales service and marketing of electrical and electronic products, as well as the knowledge of industrial and commercial system management, so as to cultivate compound senior professionals engaged in automatic control, electronic technology and industrial and commercial management to meet the needs of enterprises and institutions. Main courses: engineering mathematics, mechanical drawing, mechanical engineering foundation, electronic foundation, analog electronic technology, digital electronic technology, motor and drive, factory electrical control equipment, automatic control system, automatic detection and sensing technology, PLC technology and application, numerical control technology and application, marketing, management, power electronic technology, cost and financial management, promotion technology and business negotiation, foreign trade practice, business English, economic law, etc.
6. Construction machinery operation and maintenance major: Professional training goal: to train advanced technical application-oriented professionals who master the basic theory and professional knowledge of construction machinery, control and design, and engage in the installation, debugging, use, maintenance and technical management of construction machinery. After graduation, students majoring in this major can engage in the use, maintenance and management of construction machinery, sales and technical services of construction machinery and its accessories in various large-scale construction machinery enterprises, engineering companies and construction units. Employment prospects are good, employment is wide, and graduates are in short supply. The college has established a long-term and stable relationship between talent supply and demand with many enterprises, and can be directly employed after graduation.
The faculty of the Department of Mechanical and Electrical Engineering has a reasonable structure and strong strength, with senior titles accounting for more than 80% and double-qualified teachers accounting for more than 90%, including 2 professors, academic leaders of the Ministry of Transport 1 person, famous teachers of Jiangsu transportation system 1 person, 8 senior lecturers, 9 intermediate lecturers, 4 national technical experts, 5 technical experts from Jiangsu Province and 5 innovation experts from May 1st. 20 10 in the activity of striving for "double hundred and double first" in the transportation industry of the whole province, the party branch of the machinery department was rated as "advanced fortress party branch". Automobile Department is one of the newly established departments in this college. Since its establishment, the Department of Automobile has actively adapted to the characteristics of the information society and the overall needs of Jiangsu's transportation development, attached great importance to teaching reform and knowledge innovation, revised and adjusted the teaching plan and teaching content in time according to social needs and talent training objectives, strengthened practical teaching, continuously improved the quality of running schools, broadened the professional level and direction, and cultivated highly skilled talents with "morality, depth and artistry". At present, there are modern automobile inspection and maintenance, automobile business, automobile application technology, vehicle engineering, transportation and other majors. The professional level covers four school-running levels: primary, intermediate, advanced and technician, with more than 1,000 students/kloc-0.
1, Automobile Inspection and Maintenance Technology Major: This major trains students to master appropriate automobile theory, automobile performance test, inspection and maintenance technology, and economic and marketing theory, and can obtain a double-major diploma. They can not only engage in automobile and parts sales and after-sales service, automobile inspection, maintenance and management, but also engage in business investigation and prediction, promotion, planning, market management and promotion, technical services and so on. Main courses: mechanical drawing, mechanical design foundation, electrician and electronic technology foundation, engine and automobile theory, automobile electronic control technology, automobile modification and decoration, automobile inspection and maintenance technology, marketing, foreign trade practice, promotion technology and business negotiation, and e-commerce.
2. Automotive technical service and marketing major: Training objective: This major trains compound advanced technical applied talents who can engage in automobile performance testing, fault analysis and maintenance, automobile and parts sales and after-sales service, automobile modification and parts manufacturing. Main courses: mechanical drawing, mechanical design foundation, electrical and electronic technology foundation, computer application, engine and automobile theory, automobile electronic control technology, automobile marketing and technical service, automobile inspection and maintenance technology, automobile air conditioning.
3. Automotive Plastics Technology Major: This major cultivates compound advanced technical application-oriented talents who can not only master the appropriate automobile theory, automobile performance testing, inspection and maintenance technology, but also engage in automobile parts sales and after-sales service, automobile testing, maintenance and management, as well as business investigation and prediction, promotion, planning, market management and promotion, and technical services. Main courses: mechanical drawing, mechanical design foundation, electrician and electronic technology foundation, engine and automobile theory, automobile electronic control technology, automobile modification and decoration, automobile inspection and maintenance technology, marketing, foreign trade practice, promotion technology and business negotiation, and e-commerce.
4. Automobile application technology major: Students majoring in automobile application technology mainly study basic theoretical knowledge in automobile technology, automobile application, automobile service and other fields, receive systematic training in modern automobile diagnosis, inspection and maintenance technology, automobile marketing and other automobile services, and have the basic ability to engage in automobile beauty and management. Graduates can adapt to the technical and management work of the sales and after-sales service departments of automobile production enterprises, automobile (including used cars) circulation enterprises, automobile special maintenance service enterprises, automobile insurance loss assessment and insurance assessment departments of insurance companies, automobile transportation and logistics enterprises and other enterprises or departments. Employment orientation: The automobile industry has developed from a small industry in the past to one of the major industries in the national economy. With the gradual maturity of China's automobile industry and the increasing number of cars, the competition in the automobile sales market has intensified and the profit space has been further narrowed. However, with the change of automobile consumption structure and the maturity of consumers' consumption concept, the automobile aftermarket has shown great development potential and bright prospects, and the automobile maintenance industry will become the most profitable piece of "cheese" in the automobile industry chain. At present, China's automobile aftermarket is still in the initial stage of adjustment and expansion. However, the huge market potential and rapid growth rate have brought good market opportunities to enterprises and employees.
The department has full-time teachers 17, and about 20 part-time teachers. The structure of the teaching staff is reasonable, including 3 senior titles and 0 masters/kloc-0. More than 75% of teachers have senior professional titles, a large number of teachers have professional qualification certificates in automobile maintenance and testing, automobile marketing and other related majors, and more and more teachers have become "double-qualified" talents. They have advanced educational ideas, good professional ethics and solid professional foundation, and are a team of teachers with solid theoretical foundation, rigorous style of study, hard work, strong working ability and good sense of teamwork.
For a long time, the department has been running a school around the market, actively carrying out curriculum reform, intensifying practical training, paying attention to the combination of theory and practice, and always running skills training throughout the teaching process, striving to cultivate practical and compound applied talents with good skills. With the care and support of school leaders, the laboratory construction of our department has made great progress. There are engine disassembly, chassis disassembly and construction, automatic transmission disassembly laboratory, electrical equipment disassembly laboratory, electronically controlled engine laboratory, air conditioning ABS laboratory, automobile safety and comfort system laboratory, automobile troubleshooting laboratory and automobile maintenance laboratory, which provide a strong guarantee for the integrated teaching and research of theory and practice in this department. The Department of Information Management is one of the earliest departments established after the establishment of the College. Since its establishment, the Department of Information Management has actively adapted to the characteristics of the information society and the overall needs of Jiangsu's transportation development, attached great importance to teaching reform and knowledge innovation, revised and adjusted teaching plans and teaching contents in time according to social needs and personnel training objectives, strengthened practical teaching, continuously improved the quality of running schools, broadened the professional level and direction, and cultivated highly skilled talents with "morality, depth and artistry". At present, there are five majors: computer network technology, logistics management, accounting computerization, industrial electrical automation, electronics and information technology. The professional level covers four school-running levels: primary, intermediate, advanced and technician, with more than 700 students.
1, Electronic Information Engineering Technology: This major cultivates advanced technical application-oriented talents with all-round development in morality, intelligence and physique, and mastering basic theories and skills such as basic knowledge of electronic information, information network technology, basic methods of manufacturing electronic information products, debugging and measurement methods. Students can engage in electronic information engineering and installation, debugging and process management of electronic products in large and medium-sized electronic state-owned enterprises, Sino-foreign joint ventures and wholly-owned enterprises in Suzhou, Wuxi and Changzhou through study. Main courses: circuit foundation, analog electronic technology, digital electronic technology, high-frequency electronic circuit, VB, principle and application of single chip microcomputer, electronic measurement, EDA technology, computer network technology, DSP technology, etc.
2. Electronic Technology and Management: This major trains advanced technical application-oriented talents with the ability of quality control and management of electronic products. Through the study of this major, students can not only master the basic electronic theory, but also master some knowledge of electronic product quality management, especially the knowledge of electronic product technology, quality assurance and inspection. Mainly facing the position of inspector and quality management engineer in electronic enterprises, it carries out on-site quality control and finished product inspection of electronic products. Main courses: circuit foundation, analog electronic technology, digital electronic technology, electronic equipment structure and technology, electronic CAD, automatic detection and sensing technology, motor and control (including PLC), SMT surface mounting technology, electronic machinery manufacturing technology, electronic equipment mechanical design, electronic measurement, single chip microcomputer, C language, etc.
3. Applied electronic technology: This major cultivates advanced technical application-oriented talents with all-round development in morality, intelligence and physique, solid foundation in mathematics and physics, mastery of basic theory, professional knowledge and experimental skills of electronic technology, ability to produce complete quality inspection and maintenance of electronic products and electronic devices and electronic and electrical equipment, mastery of design and test software of this major, and assistance to enterprise R&D personnel in electronic product circuit design. Main courses: circuit foundation, analog electronic technology, digital electronic technology, automatic detection and sensing technology, signal and system, high-frequency electronic technology, electronic measurement, motor and control, integrated circuit application, single chip microcomputer principle and interface technology, electronic CAD, TV receiving technology, EDA technology, etc.
4. Computer network technology major: to cultivate advanced technical application-oriented professionals who master the basic theory and skills of computer network and have skills such as computer network hardware networking and debugging, network system installation and maintenance, and network programming. Computer network installation and maintenance ability, network application software programming ability. Employment orientation: computer system maintenance, network management, programming, website construction, network equipment debugging, network architecture engineer, network integration engineer, network security engineer, data recovery engineer, network security analyst, etc.
5. CNC machine tool maintenance major: master the cutting principle and operation skills of CNC machine tools, master the CNC programming of complex parts, use advanced CNC machining technology to process precision parts, and master computer-aided design and manufacturing technology; Technician-type talents who can be engaged in installation and debugging of CNC equipment, maintenance and fault diagnosis of CNC machine tools. Employment orientation: Graduates can engage in maintenance management, installation and debugging of electromechanical equipment in large and medium-sized enterprises, as well as design, processing and manufacturing of electromechanical products, sales and after-sales service of electromechanical equipment. This major has a large social demand, a wide employment range and a high employment rate.
6. Mechanical equipment assembly and automatic control major: train advanced skilled personnel in mechanical equipment assembly and automatic control. Employment direction: senior application-oriented and management-oriented talents engaged in electrical control of mechanical and electrical equipment, CNC machine tools and industrial computer control and related technical management; Senior skilled personnel engaged in manufacturing, assembly and debugging, operation, maintenance and management of mechanical equipment and production lines.
Full-time teachers 18, computer room and laboratory managers, part-time teachers about 20 people. The structure of the teaching staff is reasonable, including 3 senior titles and 4 graduate students. More than 75% of teachers have senior professional titles, a large number of teachers have professional qualification certificates in electrician, logistics, computer and other related majors, and more and more teachers have become "double-qualified" talents. They have advanced educational ideas, good professional ethics and solid professional foundation, and are a team of teachers with solid theoretical foundation, rigorous style of study, hard work, strong working ability and good sense of teamwork.
For a long time, the department has been running a school around the market, actively carrying out curriculum reform, intensifying practical training, paying attention to the combination of theory and practice, and always running skills training throughout the teaching process, striving to cultivate practical and compound applied talents with good skills. With the care and support of school leaders, the laboratory construction of our department has made great progress. There are 8 computer rooms, * * * with more than 500 computers, 2 multimedia language laboratories, 1 electrical and electronic basic laboratory, 1 PLC laboratory, 1 advanced electrical training and examination laboratory, 1 singlechip training laboratory, 1 computer maintenance and disassembly laboratory, and 4 multimedia classrooms. The Department of Aeronautical Engineering is a newly established teaching department according to the needs of Jiangsu traffic construction and regional economic development. Its orientation is to cultivate senior "blue-collar" talents with technical application, intelligent operation and high-skilled positions for modern manufacturing industries such as aviation maintenance and transportation services and aerospace.
1, aviation mechanical and electrical equipment maintenance major: to cultivate application-oriented professionals with basic theoretical knowledge and professional knowledge necessary for aircraft airframe structural maintenance, master aircraft structure and working principle, master the structure and working principle of main accessories of aero-engines, and have basic skills for aircraft airframe structural repair. After employment, I will work in civil airlines and civil aircraft maintenance companies, engaged in aircraft body structure maintenance, aircraft maintenance technology management, aircraft field maintenance and so on.
2. Aircraft Power Engineering Major: This major trains senior engineering and technical personnel who have knowledge of aircraft power plant or aircraft power plant control system and can engage in the design, research, production, experiment, operation and maintenance and technical management of aircraft power plant and other thermal power machinery in aviation, aerospace, transportation, energy and environment departments. The main courses include mechanical principle and mechanical design, electrician and electronic technology, engineering mechanics, engineering thermodynamics, heat transfer, fluid (including gas) mechanics, material mechanics, aerodynamics, theoretical mechanics, power plant principle and structure, power plant manufacturing technology, power plant testing technology and so on.
3. Aircraft design and engineering major: train senior engineers and researchers who have good basic knowledge of mathematical mechanics, basic theory of aircraft engineering, overall structural design and strength analysis and test capabilities of aircraft, can engage in overall design, structural design and research, structural strength analysis and test of aircraft (including spacecraft and carrier aircraft), and have engaged in general mechanical design and manufacturing. Employment orientation: Graduates can generally engage in design, scientific research and teaching in aircraft structural engineering, civil machinery, transportation engineering, ship and ocean engineering, industrial and civil construction engineering, software engineering, etc. Design, experiment, research, operation and maintenance of spacecraft, rockets and missiles. , can also be engaged in aviation and other national economic departments of technology and management.
The Department of Aviation Engineering, which is characterized by aviation, pays attention to active cooperation with aviation colleges, enterprises and institutions, and maintains a high level of professional construction by hiring industry experts as members of the steering committee and part-time teachers. Take the road of professional opening, take the needs of enterprises as the guide, and ensure the pertinence and applicability of professional training.
Personal summary of personnel
In 20xx, under the correct leadership of the leadership of the Municipal Education Bureau