Refuse to overload electricity.

It is best not to start high-power appliances such as air conditioners, televisions and microwave ovens at the same time, otherwise the instantaneous current is too large and it is easy to cause fires.

During peak hours, large-capacity equipment must use dedicated lines.

The connection of the mobile socket should not be too thin, and the amount of equipment on the socket should not be too much.

Choose qualified electrical appliances

Do not use fake and inferior electrical appliances, wires, trunking (pipes), switches, sockets, etc.

Prevent the use of "sick" electrical appliances

When electrical appliances are abnormal, such as odor and smoke, the power supply should be disconnected immediately, and the service life of electrical appliances should be paid attention to. Do not use electrical appliances that have reached the service life.

Power consumption knowledge list

People walk without electricity.

When there is no one at home for many days, you should cut off the power supply. After the electrical appliances are stopped, unplug them and minimize the live equipment, which can save electricity and ensure safety.

Be careful in thunderstorm weather

Turn off indoor appliances in advance, unplug plugs, telephone lines and closed-circuit antennas; During a thunderstorm, don't touch the power switch and electrical equipment, and don't use solar water heaters.

Small knowledge of safe use of electricity in office

0 1

Office equipment is powered by power board. When using, the same patch panel must not be plugged with too many electrical equipment, so as not to cause the patch panel to overload and cause heat and fire.

02

Avoid frequent use of the same wall socket. Frequent use of a wall socket will lead to aging of the socket wire and even fire caused by current overload.

03

Small electrical appliances commonly used in offices, such as shredders and sealing machines, have poor heat dissipation, so they should be kept away from flammable materials when used and turned off in time when not in use.

04

When charging mobile electronic devices such as mobile phones in the office, the charging time should not be too long. After the battery is fully charged, unplug the charger in time. Never leave the charger in the socket to avoid accidents.

05

Set the power management of smart appliances to power-saving mode, and the appliances will automatically enter "sleep" mode when not in use, which not only saves energy and reduces consumption, but also avoids fire hazards. If you don't use electrical equipment for a long time, you should turn off the electrical power supply in time to avoid the long standby time affecting the service life of the equipment.