1 This system is specially formulated to select qualified contractors, ensure the safety of construction and production, and avoid and reduce accidents as much as possible. 2. Scope This system is applicable to the management of contractors in this enterprise. 3. Responsibilities The Safety and Environmental Protection Department and the Director's Office are responsible for the contractor's pre-examination, education, construction supervision, inspection and acceptance; The administration department is responsible for the storage and supply of logistics materials; The production director is responsible for overall management and coordinating the cooperation and assistance of various departments. 4 Pre-qualification 4. 1 The contractor shall provide the corresponding qualification certificate, the catalogue of safety production rules and regulations, the business capacity and scope of the enterprise, past performance, and the certified scope of special operations personnel, etc. 4.2 The Safety and Environmental Protection Department, Factory Director's Office, Equipment Department and Administration Department, together with other departments, offices and workshops, will review the contents provided by the contractor to determine the contractor's safety production capacity, select a suitable contractor according to the audit results, report the audit results to the General Manager, and formally select the contractor after being approved by the General Manager; 4.3 The Safety and Environmental Protection Department shall summarize the opinions of all departments and offices, put forward safety production requirements according to the contractor's construction contents, and sign a safety responsibility letter; 4.4 The contractor shall, according to the safety production requirements put forward by the enterprise, prepare the necessary production plan, equip corresponding labor protection articles, check the safety facilities and equipment related to the operation, and accept the safety training and education of the enterprise; 4.5 After the education is qualified, the Safety and Environmental Protection Department will issue the "Contractor's Level I Education Qualification Certificate", and the contractor can only enter the factory with the "Contractor's Level I Education Qualification Certificate" and the safety responsibility agreement. 5. Operation Supervision 5. 1 The Safety and Environmental Protection Department shall determine the person in charge of the contractor's operation. During the operation, the contractor has the responsibility to implement safety measures in accordance with relevant laws and regulations and in combination with the actual situation of the enterprise's construction operation; 5.2 When the Contractor's personnel participate in hot work, electricity consumption, climbing, hoisting and other operations. , they should apply to the equipment department and apply for the corresponding work permit, which must be handled in accordance with the relevant enterprise system; 5.3 The Safety and Environmental Protection Department shall inspect and supervise the contractor's construction operation and safety production status from time to time according to the operation contents, and fill in the Contractor's Operation Safety Checklist. 6. Safety measures in construction 6. 1 The contractor must conscientiously implement the policy of "safety first, prevention first" and strictly implement the national safety production regulations and enterprise safety management regulations. Smoking, drinking and drunken operation are strictly prohibited in the factory, and illegal hot work and illegal operation are strictly prohibited. Candles and cigarettes are not allowed in the factory. Wear labor protection articles as required during construction. It is forbidden to wear shorts, skirts, slippers, barefoot (back), sleeveless vest, chase and fight, and bring children into the factory. 6.2 The contractor shall take good care of public property and all equipment, pipelines and fire-fighting facilities (equipment) in the factory, and it is forbidden to use fire hydrants and other fire-fighting equipment without the approval of the Security Department. It is forbidden to climb all kinds of mechanical devices and buildings in the factory or do things unrelated to this construction operation. 6.3 The contractor's (driving) construction vehicles must be checked and registered by the doorman, wear fire protection caps according to regulations, and drive at the speed limit in the factory. Without the approval of the safety and environmental protection department, non-operating vehicles are prohibited from entering the device area, and vehicles are prohibited from parking in the device area and fire exits. 6.4 The contractor shall carry out construction in the designated area according to the work tasks undertaken and the permitted scope of work. It is forbidden to open the pump, use or touch machines, instruments, valves, electrical equipment, etc. Walking around the installation area at will, and it is also forbidden to drag the building materials and buildings in the factory, others or other units without permission. The equipment, materials and materials on the construction site should be kept by special personnel, and theft cases should be reported to the safety and environmental protection department in time for timely treatment. 6.5 In the process of construction, the contractor shall contact the relevant departments to explain the matters needing attention in safe construction to each other, so as to prevent various accidents caused by changes in construction operations and negligence in safety. When working in flammable and explosive places, it is forbidden to use tools that are easy to generate sparks when hitting, and it is forbidden to wear clothes that can generate electrostatic sparks and shoes with nails. 6.6 The contractor shall abide by the safety management system of the enterprise, and it is forbidden to use heavy-duty electrical appliances such as electric stoves, rice cookers and electric kettles in the factory area without the approval of the safety and environmental protection department. 6.7 The Contractor shall arrange professionals with qualifications and corresponding abilities to conduct professional supervision on special operations and dangerous operations. 6.8 When the enterprise starts the safety emergency procedure, the contractor must unconditionally obey the unified dispatch of the commander-in-chief and shall not go it alone. 6.9 When there are multiple contractors in the construction project, in addition to the above provisions, the deputy director of production safety shall coordinate and manage the work of production safety. The above are collected and sorted by Zhong Da Consulting Company.

For more information about project/service/procurement bidding, and to improve the winning rate, please click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd