Chapter 1 AutoCAD Foundation
Introduction to 1. 1 AutoCAD
1.2 AutoCAD startup and working interface
1.3 Try to draw with AutoCAD.
1.4 determine the paper size
1.5 Set the layer, color, line type, line width and line type ratio.
1.6 Draw the drawing boundary line, edge line and title bar.
1.7 Fill in the text of the title bar.
1.8 Save the graphic file.
1.9 orthogonal drawing mode
1. 10 object capture
1. 1 1 automatic object capture
1. 12 polar axis tracking
1. 13 object tracking
utilize
Chapter II Drawing and Editing of 2D Graphics
2. 1 Drawing method of basic 2D graphics
2.2 Basic editing methods of graphics
2.3 A comprehensive example of drawing and editing two-dimensional graphics
utilize
Chapter 3 dimensioning
3. 1 overview
3.2 dimensioning style
3.3 dimensioning command
utilize
Chapter 4 Use of Blocks and Pattern Filling
4. 1 block overview
4.2 Definition, Use and Storage of Ceramic Tiles
4.3 Block attribute and its application
4.4 Pattern Filling
utilize
Chapter 5 Drawing Parts Drawing with AutoCAD
5. 1 Summary of key points of drawings and parts
5.2 Basic Settings of Drawing Environment
5.3 Layout main view
5.4 Drawing details of front view
5.5 Draw other views
5.6 Fill the section line in the section view
5.7 Mark the dimensions of the parts.
5.8 writing technical requirements
utilize
Chapter 6 Drawing Output
6. 1 Set and select the printout device
6.2 Set the line width
6.3 Select the drawing format
6.4 Set the print area
6.5 Set the print scale
6.6 Adjust the printing direction and position of graphics.
6.7 Preview the print effect
utilize
UG NX4.0 CAD
Chapter 7 UG NX4.0 Foundation
7. Overview of1ugnx
Working environment of 7.2 UG NX4.0
7.3 Common tools
7.4 Basic Operation of Objects
7.5 expression
Chapter 8 Feature Modeling
8. 1 basic voxel characteristics
8.2 Molding characteristics
8.3 Processing characteristics
8.4 Characteristic operation
8.5 Feature Editing
8.6 Comprehensive example of feature modeling
Chapter 9 Sketch and Curve Modeling
9. 1 Sketch modeling of modeling state diagram
9.2 Constraints of Sketch
9.3 Basic operation of sketch
9.4 curve modeling
Chapter 10 Assembly Design
10. 1 Assembly concepts and terms
10.2 reference set
10.3 basic assembly steps
The main pairing type of 10.4 assembly is constraint type.
10.5 assembly exploded view
10.6 assembly animation
appendix
Appendix 1 AutoCAD 2004 Command Set
Appendix 2 Shortcuts in UG NX 4.0
Appendix 3 Detailed installation instructions of UG NX 4.0
Appendix 4 UG NX4.0 terminology Chinese-English comparison table -CAD part
refer to