Case article on aerial work accident 1
Two cases died of falling from high altitude.
1On the afternoon of May 2, 996, Gu Guoli, a handyman from other places, was building a wall on the floor of 10. 15: 30, she found that the No.4 tic-tac-toe frame, which had been shut down for maintenance in the morning, had been restored to use, and remembered that she had entrusted the mechanic to carry a bucket of water to the floor of 10 for the team to drink before going to work in the afternoon, so she went to the tic-tac-toe frame. Looking down from the unloading platform, she saw the hanging basket carrying boiling water rising. When the hanging basket passed the 10 floor, she leaned into the shelf to get boiling water. The edge of the hanging basket rising at a high speed just touched her jaw, causing her body to lose balance, falling from the gap between the hanging basket and the unloading platform to the bottom of the well, and being sent to the hospital for rescue, she died.
During the operation, the party concerned was careless, neglected safety, failed to implement relevant safety operation regulations, and did not use safety protection facilities correctly. Before the hanging basket stopped, he rashly opened the outer door and entered the operation area, resulting in accidental being knocked down by the hanging basket and falling to death.
Case 2 of aerial work accident
The situation of falling from a height
20 12 In late April, a fatal accident occurred at a bus station in a city. An employee accidentally fell from a height while replacing broken glass in the station office building, and died after being rescued. This city is a famous tourist city in China, and the bus station undertakes more than 80% of the passenger capacity of this city. It is the most important distribution center for people flow and logistics in the city, with more than 2,200 daily passenger flights and an annual passenger traffic of 6,543.8+0.2 million.
Case 3 of aerial work accident
A case of falling from high altitude without wearing a seat belt during aerial work.
On the afternoon of May 22nd, 200 1 year, the shift supervisor of the Mechanization Department of Dari Power Generation Company inspected 1 the electric entrance and exit door of high-pressure water supply and the combined valve of high-pressure water supply.
16: 05, the project began to go through the formalities. At about 16: 35, mechanic Yang confirmed that the electric door of the high-pressure water supply inlet of 1 machine can be reinstalled, and Chen, who is in charge of this work? Without wearing a seat belt, I climbed from the 8-meter platform to the thermal insulation iron jacket of the electric door at the entrance of Gaojia water supply. As a result, the thermal insulation iron of the door fell off and fell to the ground at the joint between the water inlet pipe of Gaojia water supply and the drain pipe to the deaerator, causing injuries, and was immediately taken to the hospital for treatment.
Case 4 of aerial work accident
Cases of aerial work accidents
At 20101010121,the No.2 crane on the coal dock of a thermal power company broke one of the three wire ropes wound on the crane during the coal loading and unloading operation. 12, Zhang X, the site manager of xx Company, informed Gao xx, Chen xx and Feng xx to replace the wire ropes before going to work in the afternoon. 12: 40, Feng xx and Gao xx go to the dock first, put the boom head of the crane on the ground, and remove it from the pulley of the boom head with the old wire rope. During the replacement process, a foot-long wire rope head was stuck in a wire rope drum 5 meters above the ground. 12: 50, Gao xx climbed onto the crane without wearing a seat belt, ready to lower the wire rope head. After seeing it, Zhang X only verbally reminded him to open the conveyor belt 1. Gao xx stands on the beam about 35cm wide at the edge of the wire rope drum, and there is no fence around the beam. The crane driver of crane 1 connects a crowbar 1 meter long to Gao xx. Gao xx held a crowbar in his hands and slammed the wire head. The steel wire head slipped, driving Gao xx to lean forward along the inertia and fall to the ground head-down. He died after being rescued.
Accidents at work high above the ground Chapter 5
Cases of aerial work accidents
1 10kv Yanzishan substation, the corroded metal overpass from the main control room to the 35kv circuit breaker was transformed into a concrete overpass, which was undertaken by Zigong Electric Power Integrated Service Team (collective enterprise). On the day of the accident, the work was to dismantle the metal overpass between the roof of 10kv switch room and the 35kvi circuit breaker. Before cutting, the service team set up a metal pipe scaffold. In the afternoon, Gao Guozong (male, 37 years old, a large collective worker, bricklayer, length of service 17) took the initiative to help cut down the overpass after completing his carpentry work. After the overpass was cut off, it stood high on the springboard straddling the metal pipe scaffold, with the metal pipe scaffold as the fulcrum, and pried the overpass with steel wire in an attempt to make the overpass separate from the cement column. At this time, the weight of the overpass is relatively concentrated on the left fastener of the metal pipe scaffold, the rivet cap of the connecting pin of the movable fastener is forcibly pulled off, and the springboard falls with the steel pipe of the metal pipe scaffold, falling from the height of 4 or 7 meters and landing on the right side of the head. On-site personnel immediately sent Gao to the Fourth People's Hospital of Zigong for rescue, but the rescue was invalid and he died at 17: 35.
People who have seen the case of aerial work accidents have also noticed that:
1. Thoughts on safety accident cases
2. Thinking about safety accident cases
3. Safety work plan for the second half of the year
4. Engineering safety management papers
5. Research articles on safety work