Abstract: With the continuous upgrading of intelligent security products, all walks of life put forward higher requirements for video monitoring system, perimeter alarm system, video access control system and household alarm system of property management. A complete and efficient property security management scheme is conducive to improving the security loopholes in the community and preventing public security accidents such as fire and theft in the community. What is a community security system? Introduction of safety management scheme in residential quarters. First, what is the community security system?

1, perimeter overtaking prevention alarm device

Install various detectors around the closed community to prevent illegal entry.

2, residential alarm device

In order to ensure the personal safety of residents in the house, various detectors are installed indoors to monitor and provide emergency calls for help.

3. Visitor intercom

Mainly for foreign visitors to manage, effectively prevent foreigners from entering residential units, and often integrate with the access control system to effectively control personnel access.

4. Video monitoring equipment

Camera equipment is installed in important places such as the entrance, perimeter and public passage of the community, and the monitoring center of the community carries out monitoring video, so that managers can fully understand the dynamics of the community.

5. electronic patrol device

Patrol station is installed in the residential area, and the security guards arrive at the patrol point with patrol recorder according to the specified route and time and record it, so as to realize the monitoring and patrol of the security guards by the residential center and facilitate the security guards to dispatch in case of danger.

6. Parking lot management device

Parking lot management in residential quarters is an important part of public security management in residential quarters. At present, most high-end residential areas have realized contactless card swiping in and out of residential areas and parking lots. Generally, the reading distance is 5-50 meters, and high-end cars can identify vehicles at a distance of 20-25 meters, so that they can identify the entry and exit without stopping, and the computer can complete the function of charge management. At the same time, video monitoring equipment is installed at the entrance and exit of the residential parking lot and inside the parking lot to realize camera monitoring and management of vehicle access and parking.

Second, the community security management plan

1, video surveillance

(entrance and exit of residential area, square outside entrance and exit, entrance and exit of parking garage, elevator hall on the first floor (basement), entrance and exit of residential building, etc.). ) Personnel activity places, commanding heights of the community, entrances and exits from the top floor to the platform, elevator cars (except for two buildings or elevators directly entering the home), community perimeter, stairs on all floors of public rental housing (entrances and exits, elevator halls or public corridors), monitoring center, etc.

Installing cameras at the entrances and exits of residential quarters and motor vehicle parking lots requires installing smart cameras with embedded operating systems, which can be used for intelligent capture, number recognition, video detection, compression and transmission of continuous video streams, video and picture diversion design, etc. The capture rate of motor vehicles is not less than 90%, and the capture rate of non-motor vehicles and pedestrians is not less than 85%.

2. Access control system

Video access control system consists of unit access control, video intercom, back-end management system and public security networking. The intercom system has clear voice, clear image showing facial features of personnel, normal unlocking function and reliable, timely and accurate prompt information.

When some unexpected events occur, the system should be able to take photos and videos at the same time, and record the first 10 second and the last 10 second of the event. The photos should be real-time photos at the time of the event.

The system supports the access of fire alarm signals. When a fire alarm occurs, the event is recorded and the access control linkage enters the normally open state. You can query the incident records of access control according to various conditions, and you can also view the photos and videos of the scene when the incident occurred.

According to the collected personnel information and personnel access event records, the personnel structure, housing rental, rental rate and so on are analyzed by big data.

It is best to install anti-collision doors at the entrances and exits of residential quarters and underground motor vehicle garages, and have obvious warning signs. The gate has the function of preventing personal injury, car crash and other accidents caused by misoperation.

3. Household alarm

Ensure that there are no blind spots and dead corners, and the installation scope includes: fences, fences and rivers communicating with the outside world; The sentry box has no entrance or is unattended at night; A platform on the top of a building connected to a house, less than 6 meters high, used for shops, clubs and other functions. When the system gives an alarm, the community monitoring center should have an acousto-optic alarm signal, and accurately mark the alarm perimeter area on the analog display screen or electronic map.

Alarm controller and community monitoring center should have networking function. The alarm system of the monitoring center controls the host computer, and has the functions of displaying and storing the alarm, help-seeking, fault and other information sent by the resident alarm controller, as well as acousto-optic alarm, printing, statistics, inspection, inquiry and recording the date, time, place and alarm type of the alarm.

For illegal intrusion, the alarm response can be given in time, and the detection range should effectively cover areas connected with the outside world such as doors and windows, so as to avoid false alarm as much as possible.

4. Safety maintenance

The after-sales service content of residential security system engineering should be reflected in the contract and completion data. After the warranty period, the developer or property management company should sign a maintenance contract with a professional maintenance company, establish effective management measures and carry out regular maintenance. When the system fails, the maintenance personnel should arrive at the site within 4 hours and promptly eliminate the failure, eliminate and replace expired and damaged equipment, and maintain the good operation of the system.

Third, the content of community safety.

1. Consciously and dutifully monitor all events in the charging area. Make a comprehensive record of vehicles that break in, evade fees and refuse to pay fees; The toll evasion behavior of the pavilion or the owner's own pole-shifting behavior are all moved closer to the camera video; Foreign vehicles or personnel who appear in the toll area should ask the toll collectors and guides in time and prompt them to leave the driveway to prevent danger; For vehicles that refuse to pay fees and have disputes, report to the webmaster in time, and clear the traffic jam as soon as possible after asking for instructions to ensure the normal charging work.

2. Monitor the toll collectors and counselors to collect fees in a civilized way and regulate their appearance. Supervise and prompt the toll collectors to use the character adder correctly; Fully record the documents held by passing vehicles; Check the number of tickets and money of toll collectors carefully to avoid making mistakes, especially for new positions and interns. Prompt the toll collectors to use civilized language, and standardize the standing posture and salute of the guides; The lens tracks the standing position and standing time of the psychological counselor.

3. Monitor the security situation of toll stations and toll plazas. Track and monitor the dynamics of public security cases and criminal cases in the charging area, actively cooperate with public security personnel, traffic police stations and other departments to find lost vehicles, illegal vehicles and criminal suspects, and provide effective and reliable clues through tape adjustment.

4. Report the monitoring situation to the station leader in time. All emergencies and difficult problems on duty should be reported to the webmaster in time, and the webmaster will take measures to solve them; Try to prevent cars from happening in this class.

5. Take good care of the monitoring facilities and master the general operation process. Explain the operation of monitoring equipment during shift change to ensure the continuity and integrity of video recording process. Through my own study and consultation, I can master the use, operation and simple maintenance of TV monitoring equipment to ensure the normal operation of the equipment and give full play to the role of modern facilities.

6. Keep the control room clean and tidy. Clean the indoor sanitation at work, so that there are no chores, bright windows, clean floors and clean walls, so as to keep yourself and others happy.

7. Put things off, love your job and have a strong sense of professionalism and responsibility.

Fourth, the community security equipment

Intrusion alarm system, video monitoring system, access control system (access control system), building intercom system (visitor visual intercom system), electrically controlled security door, parking lot (garage) management system, electronic patrol system, public address system, fire control system (built separately) and monitoring center.