Learning art is not only good for your own work, but also has a great positive impact on your life outside work. Art is a subject that can cultivate people's sentiment, and people who study art are different in temperament.
If you study art, you will master more skills than others. Like the art you studied.
Then art can be your lifelong career. You can work in an enterprise because of art when you are young, and you can have a rich life because of art when you are old ... In short, choosing an art major is more flexible and poetic.
I study art, and society can't lack art, and people who study art are also very popular in employment.
2. Articles describing work experience or praising arts and crafts companies Sometimes, Murphy's success rule is really accurate.
Often what you care too much about will bring you a lot of trouble and strong frustration. I have been very serious since I changed my job.
My new job has put forward many new requirements for me, such as requirements analysis, such as programming. I am full of expectations for this new job, because I gradually realize that my workload determines the workload of others in a sense.
Automation is an arduous task. In the long run, perfecting the system is the ultimate goal. On the one hand, we must ensure the smooth progress of the business; On the other hand, we should also reduce costs and improve work efficiency.
For a person like me who has never been exposed to business, the demand may be unrealistic, absurd, out of the ordinary, and even lead to a complete change. In any case, the accumulation of quantitative change takes time, and the occurrence of qualitative change, luck, perseverance, skills and so on, is determined by many factors.
Therefore, the process of putting forward requirements is usually not smooth, and the way of submitting to superiors should be gentle and gradual. Big changes usually lead to a series of problems, because the understanding of business is far less than that of others who have worked in this field for several years. Inadequate consideration usually means denying the plan.
But step by step is not necessarily a good thing, it may be relatively easy to achieve, but once the starting point is not from the perspective of the whole system, the future work will be more difficult. | Distribution solutions, especially the handling of accounts receivable, are rare in the market.
Sap or oracle should be representative, but after all, it is a software provider, which is different from the system developed by itself, with few parameters, and needs the complete consistency of business and system processing. Coupled with the division of labor between the United States and China, it is really a bit of a glimpse, so these points will inevitably further increase the difficulty of demand.
The progress of business is very difficult, so I have to consider my attention closer and more realistic. Based on our working mode, the first thing that comes to mind is to use programs in office.
I don't want to write a program, because it is too specific, there is no room for mistakes or mistakes, and I have no practical experience, so I began to hesitate. It was the hard work of my colleagues that made me make the decision after working overtime for a long time.
The process of writing the program is quite interesting. There is no guidance and no correction. I try bit by bit, add variables and guess grammar. Fortunately, almost every function I want to realize can be realized in various ways, and the efficiency and accuracy may be compromised.
I think I realized the ups and downs of writing code, paid the effort of rest time, and was extremely excited about my achievements. The program is really great, just like the internet, it seems that nothing is impossible.
So I wrote "As long as there are rules, there are procedures". Writing programs also involves various risks.
Once there is a mistake, we should get to the bottom of it and study whether it is manual or procedural. Sometimes it's really hard to say. I don't want to check my code over and over again, which seems to be the pain of all programmers.
Colleagues in the development department don't approve of us doing a lot of work outside the system, because these work should be realized in the system through programs, so as to improve the function of the system. But from the company's point of view, compared with hiring developers, it takes a lot of time and cost, so it is more cost-effective to measure whether to develop system functions by manual labor, which has become part of my work.
From the company's point of view, it is also full of risks for a young girl to do this job. Because of this, they are cautious and conservative, which is one of the reasons why my work is difficult to speed up.
I have to say, I put all my energy into my work and I'm tired. The question is, can you not work so hard? Sure, but more tired.
So, keep trying. - .
A semester has passed and a new semester is coming. Over the past six months, I have deeply realized the hardships and happiness of being a teacher. I dedicated my youth to the education I love and to every student. A semester's work is over, and I have gained a lot. Now I will make a summary of last semester's work and set new goals for the new semester.
First, ideological understanding. Last semester, as a member of * * *, I was strict with myself ideologically, loved the Party's educational cause, fully implemented the Party's educational policy, and was strict with myself according to party member's requirements, urging myself to set an example in the minds of colleagues and classmates ideologically and at work.
Actively participate in various political activities organized by the school, such as the winter party member training activities of the school. For one semester, I obeyed the work arrangement of the school and cooperated with the leaders and teachers to do all the work inside and outside the school.
I believe that in my future work and study, with the care of the Party organization and the help of my colleagues, I will overcome my own shortcomings and make greater progress through my own efforts. The new semester is coming, I will work harder, study harder and practice harder, so that I can truly stand any test.
Second, teaching work. In terms of teaching, the teaching task of the whole semester is very heavy. I am an information technology class in Class 13, Grade 13, but in any case, in order to improve my teaching level, I insist on reading computer newspapers, information technology Olympic Games books and so on. And often find some excellent lesson plan courseware on the internet to learn, and also strive for opportunities to go out to attend classes more, learn from each other's strong points and understand the teaching art.
Usually, I also humbly ask experienced teachers. In the process of preparing lessons, carefully analyze the teaching materials and design teaching plans according to the characteristics of the teaching materials and the actual situation of students.
Over the past semester, we have carefully prepared lessons, attended lectures, evaluated classes, corrected homework in time, provided after-school counseling, and extensively dabbled in all kinds of knowledge, forming a relatively complete knowledge structure, strictly demanding students, respecting students, and promoting teaching democracy, so that students can continue to learn and improve.
3. How to learn arts and crafts sketch-When you start to learn composition, the most important thing is to learn the correct observation method (that is, the overall concept of shape), interspersed with a lot of copying (this is to let you learn to use painting tools and highlights on the screen) and sketching (sketching and sketching are inseparable). Sketch is mainly to improve your modeling ability and ability to understand and grasp modeling, as well as the cultivation of aesthetic consciousness and color-color composition. Learn to use color modeling first. Gouache-monochrome sketch (geometric plaster is like a still life), two or three-color sketch, full-color sketch, try to use less white (Liu Xiaodong, Freud can see more), learn small paintings and copy a lot.
Sketch-prepare a small notebook with 50 drawings at any time every day, regardless of the object. Write silently and let the intentional pen be the master.
First of all, we should have a three-dimensional consciousness and have an overall understanding of shapes (circle, square, triangle, fat, thin, thick, thin, etc.). In short, we must first grasp the characteristics of modeling, that is, we must first get the image, carefully appreciate the structural transition of the object, don't just stick to the surface, often sketch, and don't draw when painting, so as to be confident and not afraid of drawing badly. Find a way that suits you. Don't learn from this person today, learn from that person tomorrow. Be sure to draw it completely, don't give up halfway, and stick it on the wall every time you finish.
Excerpted from Baidu netizens, thank you.
4. How to write a paper on the history of arts and crafts in China? This paper describes what China arts and crafts are, the status of metal handicrafts, one of China arts and crafts, in China arts and crafts, the development and demand market of metal handicrafts in the contemporary era, and some feasible creations of metal handicrafts in design and art, and introduces a person around us who creates art with metal handicrafts and her artistic behavior.
Key words: China ancient arts and crafts, cloisonne \ porcelain firing \ filigree inlay \ spotted copper crafts \ tin crafts \ iron paintings \ gold and silver ornaments, etc. , the current market of metal crafts, the use of metal crafts, the creation of metal crafts "Iron Brothers", Guo Xin, ocities Text: First of all, what are the ancient arts and crafts in China? The ancient arts and crafts in China are the general name of the man-made things created by the people of China to meet the material and spiritual needs under different historical conditions. It is an important part of China's national plastic arts, which not only embodies the general essential characteristics of arts and crafts, but also maintains the unity of practicality and aesthetics in connotation and form, and also shows the distinctive personality of China's national culture itself.
China arts and crafts, with its long history, unique style, superb skills and various forms, have written a chapter full of wisdom and spiritual light for the whole history of human cultural creation. Arts and crafts have both material civilization and spiritual civilization. Although it is not pure art, and its creation is not aimed at shocking people or preaching, its influence on people is no less than pure art. ..
Because people don't have to appreciate pure art, and they don't have to appreciate it specially, but it is always providing formal language, imperceptibly cultivating people's basic aesthetic consciousness and influencing people's final aesthetic judgment like a shadow. China's ancient arts and crafts have a long-standing reputation and are the carrier of the spread of Chinese civilization. While foreigners use China arts and crafts, they also subtly recognize Chinese civilization.
The term "arts and crafts" refers to the traditional arts and crafts with a long technical tradition, rich local and national characteristics and embodying the spirit of China's classical culture. Its main categories include firing, forging, dyeing, weaving, textile, sculpture, carpentry, painting and so on. Metal craft is one of the outstanding traditional national skills in China.
Metal craft is a special category of arts and crafts in China, which mainly includes cloisonne (cloisonne is made of thin flat copper wire, welded on a copper tire, filled with colored glaze, and then fired) and porcelain (also known as "copper tire painting enamel"). The difference between cloisonne and cloisonne is that after the copper tire is made, a layer of white glaze is applied to the tire, and then glazed after sintering. ), filigree inlay (also known as "fine gold process").
Made of gold, silver and other materials, inlaid with various gems and pearls, or made by weaving technology. ), spot copper craft (spot copper craft is a unique folk traditional handicraft in Yunnan. It is made of advanced copper-based alloy raw materials through casting, fine grinding and complex post-processing. It is "the beauty lies in the point, the wealth lies in the wealth", and the brownish-red surface is unique with strange flicker, magnificent mottling and subtle changes, which is called the crown of metal crafts. )
Tin craft, iron painting (also known as iron flower) is a variety of decorative paintings made of low carbon steel by forging and welding iron sheets and iron wires. ), gold and silver ornaments and so on.
China metal art has a long history, various varieties, exquisite skills and unique style. It is a splendid treasure of the Chinese nation and the crystallization of China's excellent cultural traditions. I think China's metal craft is in a state of semi-extinction and semi-inheritance in the time change from ancient times to the present.
Compared with the development of other arts and crafts in China, it tends to be a sad but not desperate state, a surging development state. Now metal technology also occupies a very large demand.
This will not be like our present life, where more plastics are used to replace lacquerware, glass is used to replace ceramics, and industrial printed fabrics are used to replace traditional fabrics. We now have many bars, villas, environmental sculptures, green landscape fences and so on. These all need to use many traditional means of metal technology, and carry forward, redesign and re-create metal technology to make it different from traditional forms, make metal technology more colorful, and provide more materials and technical services for today's industry, humanities and public aesthetics, or artists' creation.
But today's metal technology is almost extinct by hand, and these contents are only accomplished by industrial means, machines and technology. The traditional, time-consuming and handmade metal products we can see may only be made in some art colleges or metal manual studios.
The emergence of a large number of metal processes dominated by pure science and technology will inevitably bring more business opportunities to our society, thus driving the demand for this process and increasing the variety of this process itself. Achieve goals that we could not achieve through handicrafts before.
In ancient times, our ancestors basically used only metal to make weapons and tableware, or decorations for women and bedroom decorations. Nowadays, metal technology is so large that it can be used to build high-rise buildings and space navigation tools, but so small that scientific instruments are invisible to the naked eye.
Electrical appliances need it, store decoration needs it, urban sculpture needs it, and spiral stairs in houses need it ... The ancient people in China were fascinated by metallurgical technology, and they were obsessed with discovering that metal technology could create decorative items with different properties. However, the achievements of China's ancient metal technology and its position in science and technology have not been fully understood by the world and even China people themselves.
China's bronzes have long been world-renowned, but until the early 1960s, the smelting and casting technology of Shang and Zhou bronzes was still regarded as a mystery. The ancients in China were more loyal to the decoration of metal crafts.
Take the female hairpin in China as an example. There are many forms of ancient women's hairpins, but they don't pay attention to their functionality, as long as they can be tied to their hair to play a decorative role, and pay more attention to their decorative effects, such as the Phoenix Golden Hairpin in the Ming Dynasty; ; In the Song Dynasty, the golden hairpin was shaped like a hairpin.