Busy and full college life is coming to an end, and graduation thesis is a must for college students. Graduation thesis is a more formal and important form to test the achievements of university learning. How to write a graduation thesis? The following is a model essay on the format of undergraduate graduation thesis compiled by me for your reference only. Let's have a look.
Undergraduate graduation thesis format 1 1, thesis and page requirements
A4 paper, printed vertically on one side. The margin requirements are as follows: the top and bottom margin is cm, the left margin is cm, and the right margin is cm.
Second, the paper binding page number order
1, cover (bound in standard format)
2, abstract, keywords (Chinese and English separate pages, no page number)
3. Contents (at least two levels are required, and the page number of each level is indicated).
4. Thesis
(1) Introduction or introduction (another page. Page numbers are marked from 1, and the page numbers are marked continuously until the text is quoted) ②.
③ Conclusion (on another page)
④ References (in a separate page)
Chapter III Program Serial Number
The sequence of chapter program numbers is as follows:1.(1)1(1) ①.
Fourth, typesetting format.
1, with the title of the cover in italics No.3 and centered; Major, student's name and instructor's name are in italics No.3, centered. , "abstract", there are two spaces in the middle of the word, the third is bold, centered, bold, and the next line. The content is small, and the line spacing is a "fixed value" of 3 points. "Key words" are bold and bold in Grade Four.
3, "directory", two spaces in the middle of the word, the third bold, centered, bold, one line above and below. The title of each chapter in the table of contents (without spaces in front (top box), the fourth is the fourth. Line spacing is fixed at 3 pounds.
4. "Introduction", there are two spaces in the middle of the word, and the third one is bold, centered and bold, with no blank lines up and down. There is little content, and the line spacing is a "fixed value" of 3 points.
5. The text content is in small four font, and the line spacing is "fixed value" of 3 points. Leave two spaces before all paragraphs and titles. The font of the first-level title is bold.
6. Conclusion: There are two spaces in the middle of the word, the number three is bold, the center is bold, and there are no blank lines above and below. The text is No.4, the song style, and the row spacing is "fixed value" of 3 points.
7. "References", No.3 bold, bold in the center, with a blank line at the top and bottom; The main text is Xiao Si, Song Ti, with two spaces in front of each paragraph.
Format of undergraduate thesis II. Paper type, page setup, layout and text.
The graduation thesis will be printed on international standard a4 paper (297mx210mm).
The page is divided into two parts: the graphic area and the white border area. All text, graphics and other symbols can only appear in the graphics area. The dimensions (margins) of the white edge area are: upper (25mm), lower (20mm), edge wrapping (25mm) and edge sewing (20mm).
Text and graphics are always written horizontally from left to right. Text is always edited in columns.
Use standardized simplified Chinese characters. Don't use traditional Chinese characters unless necessary. Avoid using variant characters, compound words and other nonstandard Chinese characters.
Second, the cover of the newspaper.
The cover consists of prefix, thesis title, author, school, grade, student number, instructor, members of the defense team, defense date, degree application and so on.
Prefix: The top of the cover is centered, occupying two lines. The content in the previous line is that Henan Radio and TV University uses the No.3 genre; The next line is "graduation thesis of Chinese language and literature major (undergraduate)", in bold type No.3. There is a blank line at the top and bottom of the text.
Thesis title: No.2 bold, centered at the bottom of the text, with two lines up and down.
Sub-topic: No.2 is bold, the main title is centered below, and a dash is added before the text.
Author, school (RTVU), grade, student number, instructor, members of the defense team, date of defense, degree application and other project names are in bold type No.3, and the contents are in italics type No.3, with appropriate center and left alignment under subheadings, and arranged in sequence. The line occupation format is:
Author: xxx
School: xxx Grade: xxx Student ID: xxx
Lecturer: xxx Title: xxx
Members of the defense team:
Xxx (moderator) title: xxx
Xxx title: xxx
Date of defense: x year x month x day
Education: Bachelor (this item can be omitted if you don't apply)
Undergraduate thesis format 3 Undergraduate thesis format requirements:
First, the structure and requirements of the paper
Graduation design (thesis) includes the following contents (in order):
Undergraduate thesis includes cover, table of contents, title, content summary, keywords, text, notes, references and other parts. If necessary, you can add "introduction" before the text and "postscript" after the references. All papers are required to be printed, not handwritten.
1. directory
The table of contents should be on a separate page, including the titles and page numbers of all chapters and major levels in the paper. Format requirements of undergraduate graduation thesis
2. Title of the paper
The title of the paper should be short, clear and general. The title of the thesis should reflect the core content of the thesis and the characteristics of the law major. The title of the paper is no more than 25 Chinese characters, no subtitle, no punctuation, and two lines can be written. The wording of the title of the paper must be standardized, and abbreviations or foreign language abbreviations are not allowed (except for general abbreviations, such as wto, etc.). ) is not allowed.
3. Summary of contents
The main contents and characteristics of the paper should be briefly described, and the words should be concise, which is an independent and complete paper, including the main achievements and concluding comments. Formulas and charts shall not be used in the abstract, the number of cited documents shall not be marked, and the abstract shall not be written as a table of contents. The content summary is generally about 200 words.
4. Keywords
Keywords are the subject terms of retrieval, and general technical terms that can cover the main content of the paper should be used (refer to the corresponding technical term standards). Generally, 3-5 keywords are listed, arranged from large to small according to the expansion level of the terms, and should appear in the content abstract.
5. Text
The text generally includes introduction, theory and conclusion. The number of words in the text is not less than 6000 words for undergraduates and not less than 5000 words for junior college students. Text must start at the top of the page.
* Introduction (introduction) begins with the full text, and no chapter number is written. Generally speaking, it includes the explanation of the purpose and significance of writing, the understanding of the problems studied and the questions raised.
* This theory is the core part of the full text, which should be reasonable in structure, clear in level, focused, fluent in language and concise in writing.
* The conclusion is a summary of the main achievements, highlighting the innovation points and evaluating the main work done with concise words. Conclusion Generally, it does not exceed 500 Chinese characters.
The subtitle format at text level and below is as follows: 1 .( 1); 1.； ( 1); ①。
Step 6 take notes
Annotation is the explanation of the created noun terms or the explanation of the source of quotations. Notes shall be in the form of footnotes, and the serial numbers shall be indicated by circle numbers. For example, Note ① and Note ②, the serial numbers shall not be less than 10.
7. Reference
References are an indispensable part of the paper and a list of articles and works used by the author in the writing process. References should be based on academic works and periodicals closely related to the legal profession recently published or published, and the number should be no less than 6.
Product description, technical standards, unpublished or published research papers, etc. Not listed as a reference, what really needs to be explained can be explained in the postscript.
Second, the printing and binding requirements
Papers must be printed on standard a4 printing paper, bound on the left, and printed in at least 3 copies. The top and bottom margins of the page are 2.5 cm, and the left and right margins are 2.2 cm. The paper binding sequence is as follows:
1. cover
Cover covers include Evaluation Form for Graduation Design (Thesis) of Guangxi Radio and TV University (cover, Annex 4), Evaluation Form for Graduation Design (Thesis) of Students (cover 2) and Declaration Form for Graduation Design (Thesis) of Guangxi Radio and TV University (cover 3, Annex 5).
2. Content
The table of contents is listed to the page number of the title above level 3 in the text of the paper, and the content printing requirements are the same as those in the text. There are no page numbers on the catalog page.
3. Summary of contents
The title shall be treated according to the requirements of the first-level subtitle of the text, and the abstract content shall be treated according to the requirements of the text.
4. Keywords
Index keywords are located on the same page as the content summary, and the other line after the content summary starts with "keyword:" (bold), followed by 3~5 keywords (Song Dynasty), with 1 word between words, that is, two bytes, and other requirements are the same as the text.
5. Text
The body must start from the content summary page and be set to 1 page. The page number is printed in the center at the end of the page, and other requirements are the same as the text (for example, the format of the fifth page of the text is "-5-").
The title of the paper is standard No.3 bold, centered and single-line spacing;
The first-level subtitle of the paper is standard No.4 in bold, centered and 20-pound spaced;
The text should be in standard small four-character font, with two characters at the beginning of the paragraph and a fixed line spacing of 20 points;
The illustrations in this paper should be closely matched with the text, the text is consistent with the drawings, the content is correct, and the drawing is standardized. The illustrations are numbered according to chapters and placed directly below the illustrations, and the illustrations are not named. For example, the third illustration in Chapter 2 is "Figure 2-3", and the illustration number is in standard font No.5;
Inserted tables in text do not add left and right margins. The insert table is numbered according to the chapter and placed in the upper left corner of the insert table. The insert table is unnamed. If the third insertion table in Chapter 2 is "Table 2-3", the number of the insertion table shall be in standard font No.5.
Step 6 refer to
Print according to the format specified in gb77 14—87-87 "Rules for the Description of References after Text", and the requirements for content printing are the same as the text of the paper. References start at the top of the page and have the following format:
(1) Works, books and documents
The serial number is the author's title, publishing place: publishing house, publishing year and edition (the first edition is abbreviated).
Such as: [4] Lao Kaisheng's On Education Law, Nanjing: Jiangsu Education Press, xx.
(2) Translation of books and documents
The serial number is the author's title, publishing place: publishing house, publishing year and edition (the first edition is abbreviated).
(3) Academic journals and documents
The serial number is the author's article title, academic journal and annual volume (issue).
Such as: [5] Zhou Hanhua's "Reform Model and China Legislation Law", "China Social Sciences", xx( 1)
(4) Academic conference documents
Number: author's name, editor's name, conference name, conference address, year, place of publication, publisher and year of publication.
(5) References of the paper
The serial number of the author's "thesis title", the school and level of the dissertation, and the year of defense.
(6) Western literature
The description format is the same as Chinese, with the first letter of the content words capitalized and the rest lowercase.
The authors with a large number of citations are only listed in the top three, separated by commas, and there is also the word "equal". Add after more than three authors ("etc." It was added in western languages).
If an academic conference publishes a collection of papers, add the words "collection of papers" after the name of the conference; Unpublished papers omit the items of "publisher" and "year of publication"; If the meeting address is the same as the place of publication, the "place of publication" is omitted, and if the meeting year is the same as the year of publication, the "year of publication" is omitted.
Three, graduation design (thesis) bagging requirements
Graduation design (thesis) is an important part of professional teaching, so it is necessary to standardize management and unify the bagging requirements for graduation design (thesis) materials;
1, the manuscript of the paper. Guiding outline, first draft, second draft and binding draft.
2. Process record form. Including tutor guidance record, student graduation design (thesis) evaluation form (defense process record form) and so on.
3. Relevant materials. Other materials required by the law major, such as legal social investigation report, etc.
;