The numerical control of inclined guide rail adopts electromechanical integration design, and the bed and foot are integrated. The back of the bed leans 30 degrees, with compact structure, strong rigidity, good shock resistance and convenient chip removal.
The spindle of machine tool adopts spindle unit, frequency conversion or servo main motor, which has high spindle speed and can realize stepless speed regulation. The guide rail adopts imported high-precision linear rolling guide rail and driven by AC servo motor, which has high positioning accuracy and fast moving speed. The guide rail adopts centralized automatic lubrication device and fully enclosed protection, which is fully lubricated, safe and reliable and has long service life.
This kind of CNC lathe with inclined guide rail can be equipped with multiple groups of row tool holders, multi-station electric tool holders or hydraulic servo tool holders. Elastic chuck or power chuck can be used to clamp the spindle workpiece, making it convenient and fast to clamp the workpiece.
Extended data:
Installation and use of CNC lathe with inclined guide rail
1. In order to ensure the working accuracy of the machine tool, adjust the anchor bolt or damping foot during installation to ensure that the machine tool is level and the guide rail is not twisted.
2. After the installation and debugging work is completed, you must first check whether the rotating parts are flexible and the electrical circuit is reliable, and then carry out the operation test. The test time is less than 2 hours, and it can only be put into trial operation after it is normal.
3. After the machine tool is used for a period of time, there will be a gap in the spindle bearing, and the user can adjust it appropriately according to the use speed. If the gap is too small, it will easily lead to bearing heating; Excessive clearance will affect the accuracy and surface roughness of the workpiece. By adjusting the tightness of the locking nuts of the front and rear bearings of the spindle, it is better to keep the clearance of the bearings at 0.006 mm.
4, the size of the machine tool carriage are equipped with insert iron, after using for a period of time, you can adjust the gap between the size of the carriage by adjusting the insert iron, and the operation should be flexible, without affecting the machining accuracy.
5. The sliding parts of the machine tool must be fully lubricated, with oil added 2-4 times per shift (8 hours) and bearing lubrication replaced every 300-600 hours.
6, should do a good job in the maintenance and cleaning of machine tools at ordinary times.
7. Before using the machine tool, please read the instruction manual of the machine tool in detail.
Baidu Encyclopedia-Inclined Bed CNC Lathe